Everdure NORFOLK, DAINTREE, KIMBERLEY, ASHBURTON, STIRLING Assembly Instruction

EVERDURE BUILD-IN

INSTALLATION INSTRUCTIONS

USING BUILD-IN BRACKETS

FOR EVERDURE 4 AND 6 BURNER GAS BARBECUES

Models Included:

NORFOLK DAINTREE KIMBERLEY

ASHBURTON STIRLING

STYLE, GRILLED TO PERFECTION

1

COMPONENT LIST & ASSMEBLY INSTRUCTIONS

REAR LOUVER (X2)

SPACER (X8)

15mm

LEFT HAND BRACKET (X1)

40mm

30mm

RIGHT HAND BRACKET (X1)

120mm

SCREWS (X12)

BUILT-IN BRACKET ASSEMBLY INSTRUCTIONS

1. Remove barbecue body from its carton (do not use the standard spacer brackets supplied).

2. Remove the classic barbecue built-in kit from its carton, and check the parts against the parts list

above.

3. attach the side brackets to the sides of the barbecue using four spacers (between the

bracket and the barbecue side) and four screws (through the spacers) per side.
Note 1: the screws attach to the four mounting points on each barbecue side panel.
Note 2: the brackets are aligned with the top overhang facing away from the
barbecue, and the mounting holes to the rear.
Note 3: it is possible to mount the brackets at two height positions (the top of the
barbecue level or 20mm above the level of the brackets). Take care to attach the
brackets in the same height position.

4. Place the rear louvers between the brackets and attach to the rear with the remaining four

screws.

5. The barbecue and bracket assembly can now be placed inside the enclosure (see back of page for

sizes).

PLEASE READ THE MAIN BARBECUE INSTRUCTIONS BEFORE USING THIS APPLIANCE.

PARTS LIST

900mm (4 BURNER) or 1225mm (6 BURNER)

30mm

120mm

560mm

40mm

560mm

M5

HIGHER.

LEVEL.

HIGHER.

LEVEL.

STYLE, GRILLED TO PERFECTION

2