Eutech Instruments CONDUCTIVITY ELECTRODE User Manual
OPERATING INSTRUCTIONS
Thank you for selecting an Eutech Instruments
conductivity/TDS cell. Cell constant (K) = 1.0
Dimensions (mm): 132 L x 12 dia.
BEFORE YOU BEGIN: Soak electrode in alcohol
for a few minutes to remove oils, if any.
CALIBRATION: Calibrate according to meter
instructions. ALWAYS use fresh standard:
see selected Eutech calibration standards
below. Select a calibration value equal to
2/3 of the value in the range you are
measuring.
DURING MEASUREMENT:
• Avoid particulate matter: allow it to settle
before taking measurements. Don't let
sediment build up on the sensors.
• Avoid air bubble entrapment in the sensor
by gently tapping electrode to dislodge.
• For accurate readings, make sure
conductivity cell sensors are completely
immersed in the sample.
• Rinse with deionized water after every
measurement.
CLEANING: Soak cell in alcohol for 2 minutes
& then rinse thoroughly in deionized water.
ACCESSORIES:
Conductivity Solutions (480ml per bottle)
EC-CON-1413BT 1413 µS KCI Calibration
EC-CON-1288BT 12.88 mS KCI Calibration
EC-442300BT 300 ppm 442 Calibration
EC-4423000BT 3000 ppm 442 Calibration
Contact your distributor for more solutions.
WARRANTY: This cell is warrantied for a
period of 6 months from the date of purchase.
If repair, adjustment or replacement is
necessary and has not been the result of
abuse or misuse within the 6 month period,
please return the cell – freight pre-paid –
and correction will be made without charge.
Out of warranty products will be repaired on
a charge basis.
RETURN OF ITEMS: Authorization must be
obtained from your distributor before
returning items for any reason.
Note: We reserve the right to make changes, improvements
and modifications to products shown without prior notice.
Solution
Solution
Solution
Solution
Built in
temperature
sensor for ATC
Rugged epoxy
housing with
1m cable
Setting the
Standard
in Water
Testing
68X247782 12/01 Rev 0
E
L
B
A
L
I
A
V
A
O
S
L
A
(d)
(c)
(e)
(b)
(a)
Eutech manufactures a comprehensive range
of laboratory and field instrumentation for
water analysis. Eutech also produces on-line
process instruments for water quality
monitoring and control. Innovative products
from Eutech include:
(a) Waterproof Testers
(b) Waterproof Hand-held Meters
(c) Laboratory Bench Meters
(d) Industrial Process Controllers
(e) Hand-Held Meters
WORLD-WIDE SALES AND SERVICE SUPPORT
Eutech provides wor ld-wide sales and service support
for all its products through its network of international
distributors. Contact Eutech for details of your nearest
distributor.
Manufactured By:
Eutech Instruments Pte Ltd
Blk 55, Ayer Rajah Crescent,
#04-14/24, Singapore 139949
Tel: (65)778 6876 Fax: (65)773 0836
E-Mail: marketing@eutechinst.com
Web-Site: http://www.eutechinst.com
Made in Singapore
68X247842 12/01 Rev 0
Loading...