EUROTECH NZB01 Users Manual

nanoZB - NanoZigBee

features

Module MCU-RF in a small package
Scalable IEEE 802.15.4 and ZigBee Compliant Platform

2.4 GHz Low Power Transceiver for the IEEE 802.15.4 Standard
16 selectable channels
Nominal output power 0dBm
Receive sensitivity of -94 dBm (typ)
Integrated or external antenna
6-channel 8-10 bit ADC (AD1Px)
2-UART
1 IIC bus (SCL, SDA)
5 general purpose input/output (GPIO)
1 general purpose output (GPO)
1–channel Input-Output Compare/PWM
Field upgradeable
2V to 3.4V operating voltage
Average current: less then 17 A (stop mode at 85°C)
Operating Temperature -40°C ~ +85°C

overview

This module is the right response at any low-data-rate, monitoring, control or automation
application that requires long battery life and wireless connectivity.
This module provides solutions for wireless sensing and control applications that require networks
that support simple point-to-point solutions, to complete ZigBee compliant mesh networks.
It is a stand-alone module with its MCU that is in field programmable and with many pins
configurable for a flexible and adaptable use to every field.

target applications

Industrial automation Remote monitoring and control

Domotic Remote sensors monitoring
Medical equipment Active RF ID
Localization

certifications

CE This device complies the EU directive 99/05/CE, 73/23/CEE, 2004/108/CE
FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. changes or
modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
Module type : IEEE802.15.4/ZigBee MODEL nanoZB
FCC-ID: UKMNZB01
This intends to inform you how to specify the FCC ID of our IEEE802.15.4/ZigBee MODEL nanoZB on
your final product. Based on the Public Notice from FCC, the product into which the our transmitter
module is installed mast display a label referring to the enclosed module.

NZB Datasheet r Draft 2007 pag 1 of 4

Specifications

Terminals

1. GND

16. GPIO/SCL

2. BKGD/GPO

17. GPIO/SDA

3. RST~

18. GPIO

4. AD1P1

19. NC

5. AD1P2

20. GND

6. AD1P3

21. AD1P0

7. AD1P4

22. UART_CTS1

8. AD1P5

23. UART_RTS1

9. VDD

24. UART_TX1

10. GND

25. UART_RX1

11. UART_CTS

26. GPIO

12. UART_RTS

27. GPIO

13. UART_TX

28. GPIO

14. UART_RX

29. GPIO/TPM

15. GPIO

30. GND

Physical Dimension and Labeling

NZB Datasheet r Draft 2007 pag 2 of 4