EuroLite LED PMB-4 COB RGB 30W Bar User Manual
©
Copyright
Nachdruck verboten!
Reproduction prohibited!
Für weiteren Gebrauch aufbewahren!
Keep this manual for future needs!
LED PMB-4 COB
RGB 30W Bar
USER MANUAL
00068870.DOC, Version 1.0
16/27
USER MANUAL
LED PMB-4 COB RGB 30W Bar
CAUTION!
Keep this device away from rain and moisture!
Never open the housing!
For your own safety, please read this user manual carefully before you initially start-up.
Every person involved with the instal lat ion, oper ation and m aint ena nc e of this device ha s to
- be qualified
- follow the instructions of this manual
- consider this manual to be part of the total product
- keep this manual for the entire service life of the product
- pass this manual on to every further owner or user of the product
- download the latest version of the user manual from the Internet
INTRODUCTION
Thank you for having chosen a EUROLITE LED PMB-4 COB RGB 30W Bar. If you follow the instructions
given in this manual, we are sure that you will enjo y this device for a long perio d of tim e.
Unpack your device.
SAFETY INSTRUCTIONS
CAUTION!
Be careful with your operations. With a dangerous voltage you can suffer a dangerous
electric shock when touching the wires!
This device has left our prem ises in absolutely perfect condit ion. In order to maintain this c ondition and to
ensure a safe operatio n, it is absolute ly necessary for the user to f ollow the safet y instructions and warning
notes written in this user manual.
Important:
Damages caused by the disregard of this us er man ual are not s ubject t o warranty . The d ealer
will not accept liability for any resulting defects or problems.
If the device has been exposed to drastic temperature fluctuation ( e.g. after transportation), do not s witch it
on immediately. The arising c ondensation water m ight damage your device. Lea ve the device switched of f
until it has reached room temperature.
00068870.DOC, Version 1.0
17/27
Please make sure that there are n o obvio us tr ansport dam ages. Sh ould you no tice an y dam ages on the A/C
connection cable or o n the casing, do n ot take the de vice into operatio n and imm ediately consult your loca l
dealer.
This device falls under protection-class I. The power plug must only be plugged into a protection class I
outlet. The voltage a nd frequency must exactly be the same as stated on the device. Wrong voltages or
power outlets can lead to the destruction of the device and to mortal electrical shock.
Always plug in the p ower plug last. The po wer plug must always b e inserted without f orce. Make sur e that
the plug is tightly connected with the outlet.
Never let the power- cord come into contact with othe r cables! Handle the power-cord and all connections
with the mains with particular caution! Never touch them with wet hands, as this could lead to mortal
electrical shock.
Never modify, bend, strain mec hanical ly, put pressure on, pull or heat u p th e po wer c ord. Never operate next
to sources of heat or cold. Disregard can lead to power cord damages, fire or mortal electrical shock.
The cable insert or the female part in the device must never be strained. Ther e must always be sufficient
cable to the device. Otherwise, the cable may be damaged which may lead to mortal damage.
Make sure that the po wer-cord is never crimped or damaged b y sharp edges. Check the device and the
power-cord from time to time.
If extension cords are used, make sure that the core diameter is sufficient for the required power
consumption of the device. A ll warnings concerning the power cord s are also valid for possible extens ion
cords.
Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle the
power-cord by the plug. Never pull out the plug b y tugging the power-c ord. Other wise, the cabl e or plug can
be damaged leading to mortal electrica l shock. If the power plug or the power switc h is not accessible, t he
device must be disconnected via the mains.
If the power plug or the de vice is dusty, the de vice must be taken out of opera t ion , disc o nnec te d a nd t hen be
cleaned with a dr y cloth. Dust can reduce t he insulation which may lead to mor tal electrical shock . More
severe dirt in and at the device should only be removed by a specialist.
There must never enter any liquid into power outlets, extensi on cords or any holes in the housing of the
device. If you suppose that also a minimal amount of liquid may have entered the device, it must immediately
be disconnected. This is also valid, if the device was exposed to high humidity. Also if the device is still
running, the device must be checked by a specialist if the liquid has reduced any insulation. Reduced
insulation can cause mortal electrical shock.
There must never be any objects e nteri ng int o the device. This is es p ec ially valid for metal parts . If an y m etal
parts like staples or coarse metal chips e nter into th e device, the d evice m ust be taken out of operation a nd
disconnected immediately. Malfunction or short-circuits caused by metal parts may cause mortal injuries.
HEALTHHAZARD!
Never look directly into the light source, as sensitive persons may suffer an
epileptic shock (especially meant for epileptics)!
Keep away children and amateurs!
Never leave this device running unattended.
00068870.DOC, Version 1.0
18/27
OPERATING DETERMINATIONS
This device is a lighting effect for creating dec or ative ef fects. This product is on l y allo wed to be operated with
an alternating voltage of 230 V, 50 Hz and was designed for indoor use only.
This device is designed for professional use, e.g. on stages, in discotheques, theatres etc.
Lighting effects are not des igned for permanent op eration. Consistent op eration breaks will ens ure that the
device will serve you for a long time without defects.
Do not shake the device. Avoid brute force when installing or operating the device.
When choosing the installation-spot, please make sure that the device is not exposed to extreme heat,
moisture or dust. Ther e should not be any cables l ying around. You endanger your own and the safety of
others!
This device must never be o perat ed or stoc k piled in s ourro undin gs where splas h water, rai n, m oisture or f og
may harm the device. M oisture or ver y high humidit y can reduce t he insulat ion and le ad to m ortal electrica l
shocks. When using smoke mac hines, make sure that the device is never ex posed to the direct sm oke jet
and is installed in a distance of 0.5 meters between smoke machine a nd device. The room must only be
saturated with an amount of smoke that the visibility will always be more than 10 meters.
The ambient temperature must always be between -5° C and +45° C. Keep away from direct insulation
(particularly in cars) and heaters.
The relative humidity must not exceed 50 % with an ambient temperature of 45° C.
This device must only be operated in an altitude between -20 and 2000 m over NN.
Never use the device d uring thunderstorm s. Over voltage could destro y the device. Always disconnec t the
device during thunderstorms.
The symbol
---m
determines the minimum distance from lighted objects. The minimum distance
between light-output and the illuminated surface must be more than 0.1 meters.
This device is only allowed for an installation via the mounting bracket. In order to safeguard sufficient
ventilation, leave 50 cm of free space around the device.
The housing must never touch surrounding surfaces or objects.
Make sure that the area below the installation place is blocked when rigging, derigging or servicing the
fixture.
Always fix the fixture with an appropriate safety bond.
The maximum ambient temperature T
a
= 45° C must never be exceeded.
Operate the device only after having become familiarized with its functions. Do not permit operation by
persons not qualified for operating the device. Most damages are the result of unprofessional operation!
Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.
Please use the original packaging if the device is to be transported. Make sure that yo u pack the device in
the original state.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way dif f er ent to t he o ne described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like shortcircuit, burns, el ectric shock, crash etc.
Loading...