Euroflex Talking Mushroom Installation And Operating Manuallines

Seite 1 von 5

Data Sheet Nr. 9382 R - 0

Edition: Sept. 2016

All information without guarantee, subject to change. The installation instruction is not subject to any
change service. Each current and valid from can be recalled at www.kraiburg-relastec.com/euroflex/

Talking Mushroom

KRAIBURG Relastec GmbH & Co.KG
Fuchsberger Straße 4 · D-29410 Salzwedel
Fon [phone] · Fax [phone]
[e-mail] · www.kraiburg-relastec.com/euroflex

Installation and operating guidelines

Storage of EUROFLEX® Products and adhesive cements

EUROFLEX® products should normally be stored in dry areas at constant temperature above
10°C. If stored below 10°C, store the slabs at the installation site temperature (> 10°C) for at
least 2 hours before installation.
Important note: Adhesive cements must be stored at all times in dry locations above 0°C.
To avoid colour variations due to differences in sunlight exposure, leave the UV protection
film on the products as supplied until just prior to installation.

Required Tools

Special hex-wrench (will be provided)

Seite 2 von 5

Data Sheet Nr. 9382 R - 0

Edition: Sept. 2016

All information without guarantee, subject to change. The installation instruction is not subject to any
change service. Each current and valid from can be recalled at www.kraiburg-relastec.com/euroflex/

Talking Mushroom

KRAIBURG Relastec GmbH & Co.KG
Fuchsberger Straße 4 · D-29410 Salzwedel
Fon [phone] · Fax [phone]
[e-mail] · www.kraiburg-relastec.com/euroflex

Outdoor

For unbounded subbase use the additional installation tool and insert them in a fresh
concrete bed C 12/15. After curing process screw them together with the base plate.