Combination oven suitable for cooking food in ordinary homes for non-professional purposes
combining, in a single product, traditional cooking with the advantages of steam to obtain excellent
results for each meat, fish, vegetable and dessert dish while at the same time retaining the taste,
freshness, aromas and above all the nutritional properties of the food. This oven is not suitable for
other purposes.
Install and use the appliance in rooms with temperatures that do not fall below 5°C.
5
WARNINGS
x This appliance is designed to be used by adults who are familiar with these user instructions.
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for their
safety. Children should be supervised to ensure that they do not play with the appliance.
xMake sure that the power cord of the electrical appliances is not crushed by the oven door.
The electrical insulation could be damaged.
x
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
x Children are often unable to recognize the risks entailed in using the appliance. Please
supervise children properly and do not let them play with the appliance.
x Heat forms during cooking and the appliance door, can become very hot. Do not touch the
door and keep children away.
x Individuals who are disabled or not self-sufficient must be assisted by capable adults.
x During use, the accessible parts of the oven may become very hot. Keep children away from
the oven until the appliance has cooled.
x When opening th
careful of the flow of hot air and/or steam coming out of the cooking chamber. Step
back or to the side to avoid burns.
x It is advisable to use distilled water in order to reduce the formation of scale.
x Install and use the appliance in rooms with temperatures that do not fall below 5°C.
x Do not use the oven to heat the room.
x Before closing the oven door, make sure there are no foreign objects or pets inside the oven.
x Do not store flammable materials or temperature-sensitive objects such as cleansers, sprays,
vacuum packed containers, canned food, etc. in the oven. This presents a fire / explosion
risk.
x Preserve this manual carefully and keep it handy so that you can consult it whenever
necessary. If you sell or give the appliance to another person, do not forget to attach this
manual to the appliance.
x As soon as an operating problem is discovered, the oven must be unplugged.
x Hot grease and fat catch fire easily. It is dangerous to heat oil in the oven to cook meat and
this should be avoided. Never try to put out a grease fire using water (there may be a n
explosion). Suffocate the flames with wet cloths.
x The grill, plates and cooking containers become very hot. When inserting or removing them,
use oven gloves or pot holders which are completely dry.
e oven door during or upon completion of the cooking phase, be
The appliance must not be installed behind a decorative door in order to avoid
overheating. (IEC 60335-2-6)
The instructions for ovens that have shelves shall include details indicating the
correct installation of the shelves (IEC 60335-2-6)
During use the appliances becomes hot. Care should be taken to avoid touching
heating elements inside the oven
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven
door glass/ the glass of hinged lids of the hob (as appropriate), since they can
scratch the surface, which may result in shattering of the glass. (IEC 60335-2-6)
Do not use steam cleaners to clean the oven
6
x When using or cleaning the oven, be careful not to place your fingers in the door hinges or
in the door itself in order to avoid crushing or injuries. Be especially careful of this when
children are present.
x Leave the oven door open in the supported position only.
x When the door is open, there is a risk of tripping or crushing fingers.
x Do not sit or lean on the oven door, and do not use it as a work surface.
x For maintenance, moving, installation and cleaning of the appliance, use suitable prevention
and protection equipment (gloves, etc.).
x Lifting and moving of appliances weighing more than 25 kg must be carried out using
proper equipment, or by two persons, in order to avoid risks or injuries.
x Any work on the appliance must be done with the appliance disconnected from the electrical
power supply.
It is not permitted to modify, tamper with or attempt repairs on the appliance, especially
with tools (screwdrivers and the like), either inside or outside the appliance.
Repairs must only be carried out by authorized personnel, especially on the electrical parts.
Inappropriate repair work may cause serious accidents, damage the appliance and equipment
and lead to improper operation.
x Appliances repaired in technical service centres must undergo routine testing, especially
concerning the earth circuit continuity.
x Use only the food / temperature probe included in the oven accessories. If the food probe
breaks or becomes lost, contact your nearest Authorized Service Centre.
x The manufacturer shall not be held liable for damage to persons or
property due to poor or incorrect maintenance of the appliance.
x The manufacturing company declines all responsibility if the safety
standards are not observed.
x The manufacturer reserves the right to make any modifications to its
products which it feels are necessary or useful without any advance
notice.
7
INSTALLATION
Remove the appliance from the package and check that the product and power cor
d are NOT
damaged.
Otherwise, contact the retailer before operating the appliance.
Do not lift the product by the door handle.
Packaging (e.g. paper, polystyrene) may be hazardous to children (danger of suffocation).
Keep packaging out of the reach of children.
The product must be installed and connected correctly to the mains power supply, following the
manufacturer's instructions and only by QUALIFIED PERSONNEL.
Before performing any type of work, it must be verified that the appliance is DISCONNECTED
from the mains power supply.
Connection to the mains power supply
Make sure the voltage matches that indicated on the typeplate which can be viewed by opening the
oven door.
Check whether there is an omnipolar switch available on the domestic line which is compliant with
current standards (3 mm minimum opening distance between contacts) and if it is able to support the
load of the appliance (see the typeplate). Otherwise place a device, easily reachable, between the
appliance and the electricity line with the described specifications.
CAUTION: Check whether your electrical system is equipped with an efficient earth connection
according to current standards and legal provisions.
N.B. The earth connection is required by law.
The yellow/green earth cable must not be interrupted by the switch and must be 2-3 cm longer than
the other cables.
Do not position the power cord near sources of heat or at temperatures more than 50°C above the
room temperature.
If the appliance is lacking the power cord, the oven must be connected to the mains power supply
with a cable having a minimum section of 1.5mm².
If a plug is to be used, it must be a standard plug suitable for the load and the power outlet.
It is necessary to allow disconnection of the appliance from the supply after installation. The
disconnection can be achieved by having the plug accessible or by incorporating a switch in the
fixed wiring in accordance with the wiring rules
Replacement of the power cord:
If the power cord needs to be replaced, use cables of the following type only:
H05 RR-F, H05V2V2-F(T-90)
Wire sections 3x1.5mm
2
Terminal box
The oven is equipped with a terminal box set up for operation with a single-phase 220-240V~
50/60Hz supply voltage.
Attention: should it be necessary to replace the supply cord, connect the wire in accordance with
the following colours/codes:
BLUE - NEUTRAL (N)
BROWN- LIVE (L)
YELLOW-GREEN - EARTH ( Ũ )
8
Oven pr
eparation and pre-use
N.B. Disconnect the oven from the mains power, or move the omnipolar switch to OFF, before
cleaning the oven.
Before using the oven, thoroughly clean the inside using a soft cloth or non-abrasive sponge
dampened with warm water and washing-up liquid. Insert the grill and drip pan in their respective
tracks.
Turn on the oven, see page 14 select the "Professional Cooking" function , see page 16 and set
the temperature to 230°C. Operate the oven empty for about 30 minutes in order to remove any
residues of manufacturing oil or grease which can produce unpleasant odours during cooking.
Air the room during this operation.
CLEANING AND MAINTENANCE OF OVEN AND ACCESSORIES
x To facilitate the cooking chamber cleaning operations, it is advisable to use the automatic
process described on the following pages.
x Then it is advised to disconnect the appliance from the mains power supply.
x Use a damp sponge to remove any residues from the chamber walls after each use.
x Do not use steam cleaners to clean the oven.
x Do not use coarse abrasive material such as scourers, metal scrapers or steel wool to clean
the glass of the oven door in order to avoid scratches that may cause the glass to shatter.
x DO NOT WASH THE FOOD PROBE IN THE DISHWASHER.
x The grill, pitcher and drip pan can be washed in the dishwasher.
x Empty the water pitcher after each use for hygiene reasons.
x After cooking, and when the oven has cooled sufficiently, use a soft cloth to dry any liquid
remaining on the bottom of the cooking chamber.
9
INSTRUCTIONS FOR CORRECT INSTALLATION
TECHNICAL DATA
x
Water tray capacity:1.2 L.
x Usable volume (cooking chamber): 27 L.
x Gross volume (cooking chamber): 31 L.
x Connection voltage:220-240V~ 50/60Hz
x Maximum pickup voltage:2.2kW
10
Oven dimensions
11
DESCRIPTION OF THE OVEN AND ACCESSORIES
1
16
14
16
2
13
12
11
16
16
4
10
9
BACK
SIDE
FRONT
SIDE
3
5
8
6
15
7
1 C
ontrol panel and data display
2 Pitcher compartment
3 Pitcher
4 Filter compartment
5 Filter cap
6 Food or temperature probe
7 Drip pan
11 Door
12 Cooking chamber
13 Side grills
14 Food probe connector
15 Connector cap; to be inserted on the
connector (14) when not using the probe(6)
16 Fixing hole in position
8 Perforated pan
9 Grill
10 Handle
P
relimi
nary operation to be done before switching on the oven, or before choosing a cooking cycle
Before switching on the oven check that the cap (15) is inserted on its place (14). In case of cooking cycles
with the probe, insert it (6).
The oven does not start cooking if any of the two accessories is not inserted.
Note: during the cooking time or at the end of it the cap is hot.
If you want to leave the cap to insert the probe, please wait the oven to cool down or use suitable prevention
equipment (e.g. gloves).
12
DESCRIPTION OF THE CONTROL PANEL
1
Description of the keys
1. Keys for setting the cooking chamber temperature and display area for the temperature
indication
( + to increase, - to decrease, min. 30C°-max. 230°C * depending on the cycle selected, see
page 15 )
2. Keys for setting the food probe temperature and display area for the food probe temperature
indication
( + to increase, - to decrease, min. 30°C-max. 90°C)
3. Keys for programming timed events and display ar ea for timing indication
4. Keys for programming the alarm or setting the clock and display area for clock / alarm
indication
5. Cooking chamber light on / off key
6. Oven on / off key
7. Cooking function selection keys
8. Selection confirmation key
9. Keys for scrolling the menu items
2
9
8
7
34
65
13
Loading...
+ 33 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.