Euro Appliances EMIN110B User Manual



cooking

USE AND
CARE GUIDE

MODELNO.

EMIN110B

EMBRACE EUROPEAN QUALI+PASSION

www. eu roa ppli a nces.com .au

Dear Customer
Thank you for purchasing a Eurostyle Cooktop.
Before we continue telling you about this cooktop, we cordially invite you to become part
of the Eurostyle family by subscribing to ongoing information and invitations.
You will find that the clean lines and modern look of your Eurostyle Cooktop blends
perfectly with your kitchen décor. It is easy to use and performs to a high standard.
There are models to complement your new Eurostyle Cooktop.
Of course we make every effort to ensure that our products meet all your requirements,
and our Customer Relations department is at your disposal, to answer your questions and
to listen to all your suggestions (see back cover of manual).
Please complete the warranty section of this manual and keep your receipt as proof of
purchase. Retain all documents relating to the purchase of this products.
Eurostyle is committed to providing increasingly efficient products that are easy to use,
respect the environment and are attractive and reliable.

Eurostyle

We ask that you carefully read the instructions within this booklet to enable you to abtain quality
results from the outset.
The appliance must be installed only by an authorised person in compliance with the instructions
provided. The manufacturer declines all responsability for improper installation which may harm
persons and animals and damage property.
The appliance must be used for the purpose for which it was expressly designed. Any other use
(eg heating rooms) is considered to be improper and consequently dangerous. The manufacturer
declines all responsability for damage resulting from improper and irresponsible use.
The manufacturer shall not be held responsible for any inaccuracies in this handbook due to
printing or transcription errors. The designs in the figures are purely indicative.
The manufacturer also reserves the right to make any modifications to the products as may be
considered necessary, useful or in the interests of the user, without jeopardizing the main
functional and safety features on the products themselves.
If your cooktop requires service, please contact your local customer service centre or your
nearest Eurostyle agent listed at the back of this booklet.

The appliance has 4 cooking areas with different sizes and different power levels. The heating
elements are of the magnetic induction type, which come on after selecting the heating element,
and the heat can be regulated using the controls on the front panel, from a minimum of 1 to a
maximum of 9 (depending on the models). There is also a fast boiling function (booster) indicated
by the letter P on the display.
The cooking zones are crosses with the following diameters.

COOKING AREA

TYPE: PCZ VTCI

Model: EMIN110B

3

with booster

1 Induction element Ø 210 mm 2200 W 3200 W

2 Induction element Ø 145 mm 1400 W 1800 W

3 Touch control

4 Induction element Ø 180 mm 1850 W 2500 W

Guide to Using the Instructions Booklet

Safety instructions

Before first use, you should carefully read
the installation and connection instruc­tions.

For your safety, installation should be
carried out by an authorised technician
and should comply with existing installa­tion standards. Likewise, any internal work
on the hob should only be done by autho-
rized technical staff, including the change
of the flexible supply cable of the applian­ce.

Safety warnings:

This appliance is not designed to
work with an external timer (not built
into the appliance) or a separate remo­te control system.

Do not steam clean this device.

The device and its accessible
parts may heat up during operation.
Avoid touching the heating elements.
Children must stay away from the sto­vetop unless they are permanently
supervised.

The appliance is not intended for
use by persons (including children)
with reduced physical, sensory or men­tal capabilities, or lack of experience
and knowledge, unless they have been
given supervision or instruction con-

cerning use of the appliance by a per­son responsible for their safety. User
cleaning and maintenance may not be
done by unsupervised children.

Children should be supervised to
ensure that they do not play with the
appliance.

Danger of Fire: Do not store items

on the cooking surface.

CAUTION: The cooking process
has to be supervised. A short term coo­king process has to be supervised con­tinuously.

Precaution. It is dangerous to cook
with fat or oil without being present, as
these may catch fire. Never try to extin­guish a fire with water! in this event dis­connect the device and cover the flames
with a lid, a plate or a fire blanket.

Do not store any object on the
cooking areas of the stovetop. Prevent
a possible fire hazard.

Do not place metal objects, such as
knives, forks, spoons or lids on the surfa­ce of the hob, as they may get very hot.

The induction generator complies
with all current European standards.
Nonetheless, we recommend that peo­ple with heart devices, with such as
artificial pacemakers, consult with their
doctor or, if in doubt, refrain from using
the induction zones.

It is advisable not to use the
induction hob during the pyrolitic clea­ning function in the case of the pyrolitic

In case of h otpl at e gla ss
breakage:

●shut immediately off all burners
and any electrical heating element
and isolate the appliance from the
power supply;

●do not touch the appliance surface;

●do not use the appliance.

4

ovens, due to the high temperature rea­ched by this appliance.

When finished, turn off the coo­king zone by using the touch controls.
Otherwise an undesired operation
could occur if a pan is accidentally pla­ced on the cooking zone during the
next three minutes. Avoid possible
accidents!

Do not attempt to change the tech­nical characteristics of the product
because it can be dangerous.

If you should not to use this
appliance any more (or replace an old
model), before disposing of it, make it
inoperative in conformity with current
law on the protection of health and the
prevention of environmental pollution
by making its dangerous parts harm­less, especially for children who might
play on an abandoned appliance.

Do not touch the appliance with
wet or damp hands or feet.

Do not use the appliance barefoot.

The manufacturer will not be liable
for any damage resulting from impro­per, incorrect or unreasonable use.

During, and immediately after ope­ration, some parts of the cooktop are
very hot: avoid touching them.

Connecting the electricity

The electric connection is made via an
omnipolar switch or plug where accessible,
which is suitable for the intensity to be tole­rated and which has a minimum gap of 3
mm between its contacts, which will ensure
disconnection in case of emergency or
when cleaning the hob.

In case of failure or cut in the cable, please
move away from the cable and do not
touch it. Moreover the device must be
unplugged and not switched on. Call the
nearest authorized service center to fix the
problem. The input cable should not be in
contact either with the body of the hob or
with the body of the oven, if the oven is ins­talled in the same unit.

When using the hob for the first
time, please take care not to have
powerful halogen lights, like those of a
hood, shining over the sensor button
area of the hob. These lights may inter­fere with the starting of the system.

The electrical connection must be
properly grounded, following current
regulations, otherwise the stovetop
may malfunction.

Unusually high power surges can
damage the control system (like with
any electrical appliance).

5

Ensure the appliance is installed by
an authorised person in accordance
with AS/NZS 3000 wiring rules.

INSTALLATION AND SETUP SHOULD
BE CARRIED OUT BY AN AUTHORISED
TECHNICIAN IN LINE WITH CURRENT
INSTALLATION STANDARDS AND THE
MANUFACTURER'S INSTRUCTIONS.

Positioning the hob

To install these models, an opening with
the dimensions shown in figure 1 will be
cut into the unit’s worktop.

The fastening system for the top is desig­ned for furniture thicknesses of 20, 30 and
40 mm.

The minimum distance between the surfa­ce supporting the cooking pans and the
lower part of the kitchen unit or the hood
located above the hob should be 650 mm.
If the hood’s installation instructions
recommend that the gap is greater than
this, you should follow this advice.

The unit where the hob and oven will be
located will be suitably fixed.

INSTALLATION WITH FAN OVEN
UNDER THE HOB

The oven should be installed according to
the corresponding manual.

An opening of 20 mm should be made in
the back part of the cabinet in order to
allow cold air to enter (see figure 1).

When hobs are handled before
being installed, care should be taken in
case there is any protruding part or
sharp edge which could cause injury.

When installing units or applian­ces above the hob, the hob should be
protected by a board so that the glass
cannot be damaged by accidental
blows or heavy weights.

The glues used in manufacturing
the kitchen unit and in the adhesive on
the decorative laminate of the worktop
surface should be made to tolerate tem­peratures of up to 100 ºC.

Manufacturer assumes no res­ponsibility for any malfunction or
damage caused by faulty installation.

PLEASE REMEMBER THAT THE GUA­RANTEE DOES NOT COVER THE
GLASS IF IT SUFFERS A VIOLENT
BLOW OR IF IT IS USED IMPROPERLY.

Fastening the hob

When the gap has been properly sized, the
sealing washer should be put on the lower
face of the glass. Silicone should not be

applied between the glass and the unit
worktop because if it becomes neces­sary to remove the hob from its position,
the glass could break when trying to
detach it.

To secure the hob to the cabinet, four brac­kets should be fastened to the existing holes
on the bottom part of the casing (two in the
front and two in the back). There are two
possibilities of where the brackets may be
placed, just as is shown in figure 3.

Depending on the thickness of the cabinet, it
may be necessary to use the self tapping
screws that are provided as compliments for
securing; insert them in the circular holes of
the bracket. The thread of this hole will be
made when the screw is inserted inside of it.
The thread should be made before faste­ning the bracket to the hob.

6

Installation