EUFY T1211 Owner's Manual

Owner’s Manual

Smart Switch

T1211

1. At a Glance

LED Indicator:

● Indicates the on/off status of Smart Switch.

● Indicates the network connection status.

RESET Button:

● Press and hold for 5 seconds to reset Smart Switch to factory settings.

RESTART Button:

● Press to restart Smart Switch.

Wires:

● Live wire (Black)

● Load wire (Red)

● Neutral wire (White)

● Ground wire (Green)

LED Status Indicates

LED Indicator

Slowly flashing amber and
blue

Smart Switch is ready to
connect to a Wi-Fi network;

Rapidly flashing amber and
blue

Smart Switch is connecting to
a Wi-Fi network

Solid blue (turns off after
one minute)

Smart Switch is connected to
a Wi-Fi network.

Solid white

The device (i.e. light bulb)
turns off.

Off The device (i.e. light bulb)

turns on.

2. What You Need Before Installation

● Smart Switch

● A neutral wire at the wall switch

● A voltage detector

● A screwdriver

● Wire cutters

● A smartphone or tablet running iOS 8.0 (or above) or Android 4.3 (or above)

● A wireless router

3. Important Tips Before Installation

Before Installation, read and follow the safety instructions below:

●

Risk of electric shock or fire: turn off the electricity at the circuit breaker or fuse.
Use a voltage detector to ensure there is no power at the circuit breaker.

● If you are unfamiliar with electrical work, consult a professional electrician to
install Smart Switch.

●

Do not install Smart Switch with wet hands or when standing on wet or damp
surfaces.

● Do not use a metal faceplate as it may interfere with the Wi-Fi signal.

● Smart Switch is an indoor single-pole switch that requires a neutral connection
(lights controlled by more than one switch is not supported).

4. Downloading the EufyHome App

What you need:

● A Wi-Fi router supporting the 2.4 GHz and 802.11 b/g/n bands; the 5 GHz band
is not supported;

● A smartphone or tablet connected to a Wi-Fi network;

● A smartphone or tablet running iOS 8.0 (or above) or Android 4.3 (or above).

Download the EufyHome app from the App Store (iOS devices) or Google Play (Android
devices).

5. Installing Smart Switch

1. In the EufyHome app, tap the “+” icon in the top right corner to add “Smart Switch” to
your EufyHome account.

2. Remove the faceplate from the Smart Switch and identify the wires on Smart Switch.

3. Follow the wiring steps provided in the app to install Smart Switch.

3. After installation, press the On/Off button to turn on your device such as the light bulb.

➔

When the light bulb turns on, the LED indicator on Smart Switch will light off.

➔

When the light bulb turns off, the LED indicator on Smart Switch will light up in
white.

●

The instructions in this manual are for your reference only. The app will be updated from
time to time. Always follow the instructions in the app to complete the installation.

● Avoid radio interference between Smart Switch and your wireless router.