Eufy Cam 2 Pro operation manual

Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are

trademarks of Anker Innovations Limited, registered in the United States and other

countries. All other trademarks are the property of their respective owners.

USER MANUAL

eufyCam 2 Pro
WIRE-FREE HD SECURITY CAMERA SET

51005002224 V01

TABLE OF

CONTENTS

What's Included

Product Overview

Connecting the HomeBase 2

Setting Up the System

01

02

03

04

Mounting the Camera

05

Charging eufyCam 2 Pro

10

Safety Statement

11

WHAT’S

PRODUCT

1

INCLUDED

For HomeBase 2 Installation

HomeBase 2

(T8010)

Power Adapter

for HomeBase 2

For eufyCam 2 Pro Installation

Ethernet

Cable

Metal Pin

for Resetting

2

OVERVIEW

HomeBase 2

1. Status LED

2. Speaker

3. Power port

4. USB port

1

2

3

4 5 6

5. Ethernet port

6. SYNC/ALARM OFF button

7. Reset button

eufyCam 2 Pro

1

eufyCam 2 Pro

(T8140)

Indoor Mount

01 02

Micro-USB

Charging Cable

Hook

(for Indoor Mount)

Mounting

Bracket

1. Camera quantity and accessories vary by
bundle package.

2. HomeBase 2 power adapter varies by region.

Mounting Screws

and Anchors

5

4

1. Photosensitive sensor

2. Camera len

3. Motion sensor

4. Microphone

1
2

3

5. LED indicator

6. Sync button

7. USB charging port

8. Screw hole

7

6

7

8

CONNECTING

SETTING UP

3

Connect the HomeBase 2 to the Internet Download the App and Set up the System

1. Power on the HomeBase 2, then use the ethernet cable provided to
connect the HomeBase 2 to your home router.

2. The LED indicator turns blue (this may take up to 1min) when
HomeBase 2 is ready for setup.

03 04

THE HOMEBASE 2

4

Download the Eufy Security app from the App Store (iOS devices) or
Google Play (Android devices).

Sign up for a Eufy Security account, then follow the onscreen instruc­tions to complete the setup.

Note:

• Keep the camera at least 1 ft away from your internal / external hard drives.

• Make sure you place the camera near HomeBase 2 (within the distance of 1 ~ 3 feet).

• Make sure you set up HomeBase 2 and eufyCam 2 Pro on the App before you mount
the cameras.

THE SYSTEM

MOUNTING

5

Find a Good Mounting Spot

To find a spot to mount eufyCam 2 Pro, you need to test wireless signal strength.

① Open the Eufy Security app, go to Camera Settings > Mounting Guide.
② To test the wireless signal strength, take your camera and phone to

the location where you want to mount the camera.



③ Move the camera as close to the HomeBase 2 as possible if the wireless

signal strength is poor.

THE CAMERA

Select Height and Location

Hang eufyCam 2 Pro 7-10 ft (2-3 m) above the ground. This height
maximizes the detection range of the motion sensor of eufyCam 2 Pro.
Avoid placing eufyCam 2 Pro under direct sunlight.

Camera field

Camera field
of view

of view

Motion

Motion
Detection

Detection
Zone

Zone

7-10 ft

(2 - 3 m)

Up to 30 ft (10 m)

05 06

Mount the Camera Outdoors

Mount the Camera Outdoors

The camera can be mounted both indoors and outdoors.

1. Turn the knob of the mounting bracket clockwise to loosen and
disassemble it.

2. Drill holes with a 15/64 inch (5.95mm) drill bit, then insert the anchors
into the holes; anchors are necessary for walls that are made out of hard
materials such as concrete, brick, or stucco.

3. Firmly screw the base of the mounting bracket onto the wall. Fasten

the ball knob of the bracket to the base of the bracket.

4. Tighten eufyCam 2 Pro to the mounting bracket and adjust the viewing
angle by checking the live stream feed in the Eufy Security app.

Tips:

1.The Homebase 2 pairs up to 16 cameras, you can repeat the steps mentioned above to
add more eufyCam 2 Pro cameras to meet different needs of use.

2. For troubleshooting, check Help on the Eufy Security App. Refer to App page for LED
indicator status.

07 08

Mount the Camera Indoors

Stick the camera directly to any flat surface made out of iron. Or you can use
the indoor mount to mount the camera:

1. Drill a hole. Use the included anchor if it’s drywall and fasten the hook.

a

2. Hang the indoor mount on the hook.

3. Attach eufyCam 2 Pro to the indoor mount and adjust the viewing angle.

c

CHARGING

6

Charge eufyCam 2 Pro

Method 1

Method 2

EUFYCAM 2 PRO

5V/2A

LED indication

Charging: Steady blue
Fully charged：Off

Charging time

12 hours

1009

the Device under strong sunshine or too wet

SATETY

7

FCC Statement

This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.

Warning: Changes or modifications not
expressly approved by the party responsible for
compliance could void the user's authority to
operate the equipment.

Note: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.

This equipment generates uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures: (1)
Reorient or relocate the receiving antenna. (2)
Increase the separation between the equipment
and receiver. (3) Connect the equipment into
an outlet on a circuit different from that to
which the receiver is connected. (4) Consult the

11 12

STATEMENT

dealer or an experienced radio/TV technician
for help.

FCC Radio Frequency Exposure
Statement

The device has been evaluated to meet general
RF exposure requirements. The device can be
used in fixed/mobile exposure condition. The
min separation distance is 20cm.

Notice: Shielded cables
All connections to other computing devices
must be made using shielded cables to maintain
compliance with FCC regulations.

The following importer is the responsible party
Company Name: POWER MOBILE LIFE, LLC
Address: 400 108th Ave NE Ste 400, Bellevue,
WA 98004-5541
Telephone:[phone]

This product complies with the radio
interference requirements of the European
Community.

Declaration of Conformity

Hereby, Anker Innovations Limited declares that
this device is in compliance with the essential
requirements and other relevant provisions of
Directive 2014/53/EU. For the declaration of
conformity, visit the Web site www.eufylife.com
Due to the used enclosure material, the
product shall only be connected to a USB
Interface of version 2.0 or higher.
The adapter shall be installed near the
equipment and shall be easily accessible.
Do not use the Device in the environment at
too high or too low temperature, never expose

environment.
The suitable temperature for HomeBase 2 and
accessories is -10°C-45°C.
The suitable temperature for eufyCam 2 Pro
and accessories is -20°C-50°C.
When charging, please place the device in an
environment that has a normal room
temperature and good ventilation.

It is recommended to charge the device in an
environment with a temperature that ranges
from 5°C~25°C.
Please ensure to use only the charger offered
by the manufacturer. Using unauthorized
charger may cause danger and violate the
authorization of the device and the guarantee
article.
This charger is for indoor use only
The charger type is ASSA67W-120200, output
voltage/current is 12Vdc/2A. The plug
considered as disconnect device of adapter. RF
exposure information: The Maximum
Permissible Exposure (MPE) level has been
calculated based on a distance of d=20 cm
between the device and the human body. To
maintain compliance with RF exposure
requirement, use product that maintain a 20cm
distance between the device and human body.

CAUTION RISK OF EXPLOSION IF
BATTERY IS REPLACED BY AN INCORRECT
TYPE. DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUCTIONS.

Wi-Fi Operating Frequency
Range:2412~2472MHz ; Wi-Fi Max Output
Power:17.13dBm(ERIP for
T8010),17.47dBm(ERIP for T8140)
SUB-1G Frequency range:
866~866.8MHz;SUB-1G Output
Power:5.492dBm

The following importer is the responsible party
(contact for EU matters only)
Importer : Anker Technology (UK) Ltd
Importer Address: Suite B, Fairgate House, 205
Kings Road, Tyseley, Birmingham, B11 2AA,
United Kingdom

This product is designed and
manufactured with high quality materials and
components, which can be recycled and reused.

This symbol means the product must
not be discarded as household waste, and
should be delivered to an appropriate
collection facility for recycling. Proper disposal
and recycling helps protect natural resources,
human health and the environment. For more
information on disposal and recycling of this
product, contact your local municipality, disposal
service, or the shop where you bought this
product.

IC Statement

This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference,
including interference that may cause undesired
operation of the device."
Le présent appareil est conforme aux CNR
d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est
autorisée aux deux conditions suivantes:
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le
fonctionnement."
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.

IC RF Statement:

When using the product, maintain a distance of
20cm from the body to ensure compliance
with RF exposure requirements.
Lors de l'utilisation du produit, maintenez une
distance de 20 cm du corps afin de vous
conformer aux exigences en matière
d'exposition RF.

LEGAL

8

Use of the Works with Apple HomeKit badge means that an electronic
accessory has been designed to connect specifically to iPod touch, iPhone, or
iPad, respectively, and has been certified by the developer to meet Apple
performance standards. Apple is not responsible for the operation of this
device or its compliance with safety and regulatory standards.

NOTICE

Customer Service

Warranty

12-month limited warranty

Call Us

United States [phone] Mon-Fri 9am-5pm (PT)
United Kingdom [phone] Mon-Fri 6am-11am (GMT)
Germany [phone] Mo-Fr 6:00-11:00

Email Us

Customer Support: [e-mail]
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

@EufyOfficial @EufyOfficial @EufyOfficial

13