EU3C SCND902H1235 User Manual
FilmScan35 Professional
-Patent pending-
User Manual
Version 1.01
April 2010
Index
I. Unpack FilmScan35 Professional Scanner.............................2
II. Install film into the film holder.............................................3
III. Quick Start..........................................................................7
IV. Operation Guide................................................................12
V. Specification......................................................................37
-1-
I. Unpack FilmScan35 Professional
FilmScan35 Professional Negative/Slide Film Holder User Manual
USB power core USB/Video cable Roll Film Holder Clean brush
Note
We strongly suggest using a clean, dry, non-alcohol
cotton swab to clean the glass surface periodically
to produce a clear image during operation.
Clean dust from FilmScanner back light, to use the
clean brush to wipe the dust.
Dust or dirt from the negative, slide films and
cover trays may affect the scanned image quality,
please make sure the materials are cleaned before
inserting into the scanner.
Please find recommend, processional purger from photo store to clean the dust on
films if any to avoid damaging the only one copy of old films.
-2-
II. Install film into the film holder
●
Install the Slide into holder
1. Open the slide holder as illustrated
2. Put slide into positive slide slot 3. Close the film holder
●
Install the Negative Film into holder
1. Open the film holder as illustrated
-3-
2. Install film into negative film slot 3. Close the film holder
●
Install the Roll Film into holder:
1. Take out the roll film holder from package
2. Insert roll film into film slot 3. Pull out the roll film in another side
-4-
Note
Figure 1
Figure 2
To avoid mirror image, follow the serial numbers (from left to right) on top of film
when install negative film into holder
If the image is upside down [see fig.2], the image can be corrected by Flip function in
hard key of device before capture, or enter playback edit menu after capture [see
fig.3 and fig.4].
-5-
<Up> then <Down>
button to perform
Flip
Flip
●
Press hard key on top of device in live view
Figure 3
●
Playback mode menu
Figure 4
-6-
III. Quick Start
Right/+ button
Film Slot
OK button
SD card Slot
Left/- button
Power button
USB port
TV out jack
Power status LED
-7-
1. Put Film onto the film cartridge
2. Insert the film cartridge into FilmScan35 Professional
-8-
3. Connect USB cable to FilmScan35 Professional
4. Turn on Device by power button
-9-
5. Press OK button to capture the image
6. Follow the menu on display for scanning
-10-
Loading...