ETS REJUVASUN 332, SUN STAR 332 User Manual

28940-01A

28940-01A

i

To obtain warranty service, contact your place of purchase. Proof of purchase, including serial num­ber, is required for verification. Contact ETS, LLC only

if you purchased your equipment directly.

ETS, LLC 7445 Company Drive, Indianapolis, IN 46237-9296

1-800-449-3605

In Canada call 1-800-661-6292 or 519-421-1212

48 MONTH “GOLD MEDAL” WARRANTY

Your ETS Distributor (including ETS, LLC if purchased directly), through a manufacturer’s warranty, warrants your tan­ning unit to be free of structural defects in material and workmanship, under normal use, for its lifetime. Your ETS
Distributor will, at its discretion, repair any structural defect which materially affects the performance of the tanning unit,
or replace the tanning unit.

For forty-eight (48) months following the purchase date of your tanning unit, your ETS Distributor will provide replace­ments for parts that prove to be defective in material or workmanship, with the following exceptions: gas springs, ballasts
and electronic lamp starters are warranted against manufacturer’s defects for a period of one (1) year; “glow tube” lamp
starters and cracked or broken endcaps are warranted against manufacturer’s defects for a period of ninety (90) days; flu­orescent lamps are warranted against manufacturer’s defects for a period of thirty (30) days; acrylics are warranted against
manufacturer’s defects for a period of one (1) year (prorated) following the purchase date of your tanning unit. Shipping
charges will be covered during the first ninety (90) days following the purchase date.

Your ETS Distributor (including ETS, LLC if purchased directly), also extends to you a two (2) year parts warranty on all
T-Max® remote system components. External voltage transformers (buck-boosters) are covered by a one (1) year parts and
labor warranty, provided you send back the defective transformer.

Labor costs associated with repair or replacement work covered by this warranty will be reimbursed for repair or replace­ment work required to be performed for a period of ninety (90) days following the shipping date of your tanning unit. Normal
wear and tear, damage from misuse or abuse, damage incurred in transit or damages resulting from unauthorized repairs or
modifications are not covered by this warranty. Warranty coverage does not include cosmetic abnormalities such as scratch­es, nicks, dents, or other cosmetic changes that do not materially interfere with the function of the tanning unit.

THIS 48 MONTH “GOLD MEDAL” WARRANTY IS EXPRESSLY MADE IN LIEU OF ANY OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE, WHICH ARE HEREBY DISCLAIMED. No one has the authority to change or modify this 48
Month “Gold Medal” Warranty in any respect. To obtain service under this 48 Month “Gold Medal” Warranty, contact your
authorized ETS Distributor (or ETS, LLC if purchased directly). Proof of purchase, including serial number, is required.

IN NO EVENT SHALL YOUR DISTRIBUTOR OR THE MANUFACTURER BE LIABLE AT LAW OR IN EQUITY FOR
ANY LOSS, LIABILITY, DAMAGE OR EXPENSE IN AN AMOUNT IN EXCESS OF THE PURCHASE PRICE
RECEIVED, OR FOR LOSS OF USE OR PROFITS, LOSS OF TIME, INCONVENIENCE, RENTAL OR SUBSTITUTE
PRODUCTS, LOSS OF BUSINESS, LOSS OF INCOME, OR ANY OTHER INCIDENTAL, INDIRECT, SPECIAL OR
CONSEQUENTIAL DAMAGES. Some states do not allow the exclusion or limitation of incidental or consequential dam­ages, and the above limitation or exclusion will not apply to residents of some states. This 48 Month “Gold Medal” Warranty
gives you specific, legal rights and you may have other rights which may vary from state to state.

All warranty service must be performed by an authorized service person using only ETS authorized replacement parts. Use
of non-authorized parts may void your warranty. All labor charges must be authorized by your ETS Distributor prior to the
start of repairs and must not exceed the established rates and time allotment policies established by your ETS Distributor. If
your tanning unit must be returned for service within thirty (30) days from the purchase date, freight charges will be paid
for by your ETS Distributor, after which all freight charges shall be at your expense. Contact your ETS Distributor for the
authorized Service Center nearest you. This warranty is serial number specific and only applies to tanning units purchased
through an authorized ETS Distributor. This warranty is extended to the individual or legal entity whose name appears on
the original sales document and may not be transferred to any other individual or legal entity. This warranty is void if the
tanning unit is modified in any manner from its original design.

28940-01A

ii

elcome

Congratulations on your purchase of this technologically advanced sun tanning unit. Not only is this
unit designed and manufactured for years of dependable service, the new Rejuvasun™ unit opens up
a new revenue channel for your salon.

Please read all the instructions in this booklet before installing and using the unit. Always be sure to
observe all safety precautions.

ontents

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Unpacking and Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Pre-Installation Planning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Hardware Inventory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Assembly Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Electrical Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Final Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Remote Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Before You Tan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Exposure Times . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Using Your Sunbed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Cleaning After Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Thorough Periodic Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Mechanical Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Lamp and Acrylic Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

28940-01A

iii

afety Information

Ultraviolet radiation. Follow instructions. Avoid overexposure. As with natural sunlight, overexposure can cause

eye and skin injury and allergic reactions. Repeated exposure may cause premature aging of the skin and skin
cancer. WEAR PROTECTIVE EYEWEAR; FAILURE TO MAY RESULT IN SEVERE BURNS OR LONGTERM INJURY TO THE EYES.
Medications or cosmetics may increase your sensitivity to the ultraviolet radiation. Consult physician before using sunlamp if you are
using medications or have a history of skin problems or believe yourself especially sensitive to sunlight. If you do not tan in the sun, you
are unlikely to tan from the use of this product. Children, the elderly, or fair skinned people who always burn easily and either never tan
or tan minimally should not use this equipment.

To use, lie down under canopy and pull down as far as adjustment will allow. Minimum use distance from face tanner is 4 inches (10.2
centimeters), otherwise overexposure may occur. Minimum use distance elsewhere is touching the clear plastic panels. Do not use with­out clear plastic panels in place. Untanned persons should not tan on consecutive days during their first week of tanning. Never tan more
than once a day. Tanning normally appears after the first few sessions and maximizes after approximately four weeks. Tan once or twice
per week thereafter to maintain appearance. Persons already having a base tan may begin at advanced levels corresponding to the
extent of their base tan.

New lamps emit approximately 10% more ultraviolet radiation during the first 50 hours of operation. Recommended tanning times should
therefore be reduced by approximately 10% during that period.

WARNING: • Read the instructions booklet before using this sunlamp product. • All persons in the room should wear protective eyewear
when lamps are on. Required eyewear: Ultra SunGlobes®,

special-eyez

, or other dark-tinted eyewear that meet 21 CFR 1040.20 guide­lines. Other types of eyewear may not provide adequate protection. Failure to use protective eyewear may result in severe burns or other
eye injury. If discomfort develops, discontinue use and consult a physician.

ONLY THE FOLLOWING LAMPS HAVE BEEN CERTIFIED FOR USE IN THIS EQUIPMENT:

Velocity® Wolff® Model VEL71-T12 / 100W PREHEAT-BIPIN

(Bench lamps)

Velocity® PLUS Wolff® Model VLP71-T12-100W Bi-Pin (Canopy lamps)
Heraeus E400 HPT -or- Philips Model HPA 400/30s -or- CosmoTech Model 23045 (SolarMax™ IFT facial unit)

THIS EQUIPMENT MUST BE EARTH GROUNDED.
This product is in conformity with performance standards for sun lamp products under 21 CFR PART 1040.20 and

ANSI/UL Standard 482. Certified to CAN/CSA Standard C22.2 NO. 224.

LABELING NOTICE: Labels are affixed on all systems to inform the user of possible dangers. Regulations are stated in 21 CFR, Section

1040.20, and require that all products manufactured after September 8, 1986 which use sunlamps must display the following:

DANGER

88465

RECOMMENDED EXPOSURE TIMES IN MINUTES MAXIMUM EXPOSURE TIME IS 20 MINUTES

Level 1/Week 1

Level 2 Level 3 Level 4 Level 5

Skin Type:

1st-3rd Sessions

I

Sensitive Skin

(Burns easily and severely and does not tan.) NOT RECOMMENDED FOR TANNING

II

Light

(Burns easily and severely and tans minimally.) 4 8 12 16 20

III

Normal

(Burns moderately and tans average.) 610152020

IV

Dark

(Burns minimally, tans easily and above average.) 812162020

DISCONNECT POWER BEFORE ATTEMPTING TO CLEAN, RELAMP, OR ENGAGE IN THE MAINTENANCE OF THIS PRODUCT.

28940-01A

iv

Renseignements sur la Sécurité

Rayonnement ultraviolet. Veuillez suivre les instructions. Évitez une exposition excessive. Tout comme pour les

rayons du soleil, une exposition excessive peut causer des blessures aux yeux et à la peau et provoquer des réac­tions allergiques. Une exposition répétée peut causer le vieillissement prématuré de la peau et provoquer le cancer de la peau. PORTEZ
DES LUNETTES PROTECTRICES: LE NON-RESPECT DE CETTE CONSIGNE DE SÉCURITÉ PEUT ENTRAÎNER DE GRAVES
BRÛLURES OU DES LÉSIONS OCULAIRES À LONG TERME. Les médicaments ou les produits cosmétiques peuvent augmenter votre
sensibilité au rayonnement ultraviolet. Consultez un médecin avant d’utiliser la lampe solaire si vous prenez des médicaments, si vous
souffrez d’une maladie cutanée ou si vous croyez être particulièrement sensible aux rayons du soleil. Si vous ne bronzez pas au soleil, il
est peu probable que vous bronzerez sous une lampe solaire. Les enfants, les personnes âgées et les personnes qui ont une peau claire
qui brûle facilement, ne bronze jamais ou alors très peu, ne devraient pas utiliser cette lampe.

Étendez-vous sous la partie supérieure, puis abaissez celle-ci aussi bas que possible. La distance minimale d’usage de l’appareil de
bronzage pour le visage est de 4 pouces (10.2 centimètres), afin d’éviter une exposition excessive. Les autres parties du corps peu­vent toucher les panneaux de plastique transparents. N’utilisez pas la lampe sans les panneaux de plastique transparents. La première
semaine de bronzage, les personnes qui n’ont pas un hâle initial ne doivent pas se faire bronzer tous les jours. Ne vous faites jamais
bronzer plus d’une fois par jour. Le bronzage commence normalement à apparaître après les premières séances : il atteint son apogée
au bout d’environ quatre semaines. Les personnes qui ont déjà un teint hâlé peuvent commencer à des niveaux plus élevés, selon l’im­portance de leur hâle initial.

Les lampes neuves émettent approximativement 10 % de plus de rayons ultraviolets au cours des 50 premières heures de fonction­nement. Le temps de bronzage doit donc êatre réduit d’environ 10 % pendant cette période.

AVERTISSEMENT : • Lisez le livret d’instructions avant d’utiliser cette lampe solaire. • Les autres personnes présentes dans la pièce
doivent aussi porter des lunettes protectrices lorsque les lampes sont allumées. Coquilles de protection pour les yeux recommandées: Ultra
SunGlobes®,

special-eyez

, ou l’équivalent, tel que le stipule le document 21 CFR 1040.20. Les autres types de lunettes protectrices peu­vent ne pas assurer une protection adéquate. Utilisé sans lunettes protectrices, ce produit peut causer des brûlures ou lésions oculaires
graves. Si vous souffrez d’un malaise, arrêtez l’utilisation et consultez un médecin.

SEULES LES LAMPES SUIVANTES ONT ÉTÉ HOMOLOGUÉES POUR CET ÉQUIPEMENT :

Velocity® Wolff® Modèle VEL71-T12 / 100W PREHEAT-BIPIN

(banc seulement)

Velocity® PLUS Wolff® Modèle VLP71-T12-100W Bi-Pin (partie supérieure seulement)
Heraeus E400 HPT -ou- Philips

Modèle

HPA 400/30s -ou- CosmoTech

Modèle

23045 (unité faciale)

Cet équipement doit être mis à la terre.
Ce produit est conforme aux normes de rendement pour les lampes solaires dans le documents 21 CFR, partie

1040.20 , ANSI/UL 482 , CAN/CSA C22.2 N° 224.

DANGER

88465

TEMPS D’EXPOSITION RECOMMANDÉ EN MINUTES LE TEMPS D’EXPOSITION MAXIMAL EST DE 20 MINUTES

Élevé 1/Semaine 1

Élevé 2 Élevé 3 Élevé 4 Élevé 5

Type de peau:

1

ere-3e

I Peau sensible (brûle facilement et ne bronze pas) NON RECOMMANDÉ
II Peau claire (brûle facilement et bronze très peu) 4 8 12 16 20
III Peau normale (brûle et bronze de façon modérée) 610152020
IV Peau foncée (brûle très peu, bronze plus facilement que la moyenne) 812162020

Débrancher l’alimentation électrique avant de nettoyer l’appareil , d’en faire l’entretien ou de changer les lampes.

28940-01A

1

nstallation

Unpacking and Inspection

Your sunbed comes in two cardboard car­tons, one for the canopy and one for the
bench and ballast tray. Open the cartons
and remove the sunbed parts as follows.

The boxes dismantle to allow easy
removal of the units. Remove the box tops
and pull the sides out. The bench and
canopy are each wrapped in plastic.
Remove the plastic and, with a helper or
two, grasp the canopy and pull it from the
carton bottom without using the plastic
endcaps to lift the unit. Do the same for
the bench. Do not attempt to lift either
unit with the plastic still on as it may slip.
The ballast drawer is secured to the carton
bottom with brackets. Remove these
brackets from the ballast drawer with a
Phillips screwdriver.

Note! The cartons are reusable. You may
wish to save them for future use.

After unpacking the unit, check to make
sure you have received the following:

• Canopy unit

• Bench unit

• Ballast drawer

• Body fan kit

• Pair of gas springs

• (2) endcaps (one with slots for the
body fan bracket)

• Front access panel

• Bag containing necessary assembly
hardware, safety goggles, and pillow

Inspect these items, including the canopy
and bench, and make sure they are free
from any visible damage. Report the
extent of any damage to the transportation
company.

Record the serial number of the unit in the
area provided at the back of this manual.
This information will be required whenev­er you call customer service.

CAUTION

DO NOT lift the canopy using the plastic end­caps. They are not designed to hold the weight
of the unit and may break, causing damage to
the unit and possible injury.

28940-01A

2

Installation - Pre-Installation Planning

Pre-Installation Planning

Before you begin to assemble your sunbed, you should observe the following consid­erations.

WARNING

Shock hazard.
Disconnect power before

servicing.

Air from the room is used to cool
the sunbed. Maximum ambient room
temperature should be 80°F. Place
your sunbed no closer than 6” from
any wall. Make sure nothing
obstructs the airflow into or out of
the fan openings. A poorly ventilat­ed room may cause the unit to
become hot and cause discomfort
to the user.

CAUTION

Use of a voltage source above 230V
AC may prevent proper operation of
the sunbed and could cause damage
and void the warranty.

CAUTION

Proper assembly of your sunbed
requires three people. Plan to have
a couple of helpers assist you.

CAUTION

•The Rejuvasun™ 332 with Omnilux™
requires a dedicated circuit capable of
providing 30 Amp service at 220VAC.
This unit must be hardwired directly to
a junction box on a dedicated circuit.
We recommend connection by a pro

-

fessional electrician

.

• IMPORTANT! Voltage must be below
230V AC or may require a Buck Booster.

• Some portions of the carton may be
used for assembly. Do not discard car­tons until assembly is complete.

• You will need a #2 Phillips screwdriver
to assemble this tanning bed.

28940-01A

3

Installation - Hardware Inventory

Nylon Floating

Bearing

Quantity 4

Hinge Pin,

5/16” x 2 1/32”

Quantity 2

Hinge Pin Locking Clip

Quantity 2

Clevis Fork,

M10 Long

Quantity 2

Bronze Bushing, 10mm

Quantity 2

Clevis Pin, 10mm

Quantity 2

Retaining Ring

Quantity 2

Phillips Screw, #10 x 1/2”

Quantity 8

Phillips Screw, #10 x 1”

Quantity 8

Hardware Inventory

Open the hardware bag. Remove the
hardware. In addition to a phone type (RJ-

11) cable and pillow, make sure you have
the following items.

Safety Goggles

Quantity 1

Access Panel Key

Quantity 1

WARNING

Always wear protective eyewear when tanning
lamps are on.

Failure to may result in severe burns or
longterm injury to the eyes.

28940-01A

4

Installation - Assembly Procedures

Assembly Procedures

This sunbed arrives with a ballast tray stop
bar installed to limit tray movement (see
right). To remove, lift the bar, shift it to the
left or right and then pull it from the bed.
After the bed is assembled, reinstall the
bar to keep the tray from damaging the
access panel if the bed is moved.

Stand Assembly

1. Place the bench unit approximately

where it will be when assembled.
Leave some room behind it to work.

2. Slide the ballast drawer under the

bench, as shown, with the cables
toward the back.

28940-01A

5

Installation - Assembly Procedures

Install Canopy

1. Lay something across the bench, such
as some cardboard or a blanket, to
protect the units and place the canopy
on the bench with the canopy hinge
arms toward the back. Once again, do
not use the canopy plastic endcaps to
lift the unit.

CAUTION

DO NOT lift the canopy using the plastic end­caps. They are not designed to hold the weight
of the unit and may break, causing damage to
the unit and possible injury.

28940-01A

6

Installation - Assembly Procedures

2. Insert the Nylon Floating Bearings into
the canopy hinge arms and carefully
lower the hinge arms into the bench
uprights.

3. Secure the arms in place with the
Hinge Pins and Hinge Pin Locking
Clips.

Bench Upright