Eton E5 OPERATION MANUAL

AM/FM STEREO/

MW.SW.LW DUAL CONVERSION

E5

OPERATION MANUAL

www.etoncorp.com

4
5
6
8

8
10
10
13

13
14
14
15
15
16
16
17
17
17
18
18
19
22
23
23
25
27
27
27
28
28
29
29
30
31
31
31
32
32
32
32
33
34
34
42
44

TABLE OF CONTENTS

3

E5 OPERATION MANUAL

2

DO YOU NEED HELP?

Thank you for purchasing the E-5 AM/FM/Shortwave Radio. We
want you to thoroughly enjoy the use of this product. To take
advantage of its many excellent and unique features, we urge you
to carefully read the owner’s manual. If you need help while learning
its operation, please contact us, using the methods below.

Monday-Friday, 8:30 a.m. - 4:00 p.m., North American Pacific Time.
1-800-872-2228 from the U.S.

1-800-637-1648 from Canada
1-650-903-3866, worldwide
FAX: [phone]

Web Site: www.etoncorp.com
Mailing Address:

Etón Corporation
1015 Corporation Way
Palo Alto, CA 94303
USA

1
2
3
4

5

6

7

8

9
10
11
12
13
14
15
16
17
18

WHAT THE E-5 INCLUDES.........................................................................................

E5 FEATURES............................................................................................................

DIAGRAMS...............................................................................................................

GETTING STARTED....................................................................................................

- INSTALLING BATTERIES AND BATTERY INFORMATION............................................

- AC ADAPTER INFORMATION.................................................................................

- CHARGING Ni-MH BATTERIES IN THE E-5.............................................................

BASIC RADIO OPERATION.......................................................................................

- BEFORE USING THE E5;TURNING THE E5 ON/OFF;

USING THE SLEEP TIMER FEATURE........................................................................

- USING THE LOCK FEATURE...................................................................................

- VOLUME CONTROL...............................................................................................

- USING THE DX/LOCAL SWITCH.............................................................................

- SELECTING FM, AM and SHORTWAVE (SW)...........................................................

- LISTENING IN FM STEREO.....................................................................................

- SETTING UP AM AND FM OUTSIDE OF NORTH AMERICA......................................

- TUNING IN STATIONS............................................................................................

- BUTTONS.....................................................................................................

- TUNING KNOB......................................................................................................

- DIRECT FREQUENCY ENTRY..................................................................................

- AUTO-SCAN TUNING.............................................................................................

- SHORTWAVE WITH THE E5....................................................................................

- SIGNAL STRENGTH INDICATOR.............................................................................

CLOCK AND TIMER FEATURES................................................................................

- SETTING THE CLOCK............................................................................................

- SETTING/ACTIVATING/DEACTIVATING THE ALARMS..............................................

WORKING WITH MEMORY......................................................................................

- STORING STATIONS INTO MEMORY......................................................................

- LABELLING MEMORY PAGES................................................................................

- ACCESSING WHAT IS STORED IN MEMORY...........................................................

- CHECKING MEMORY CAPACITY...........................................................................

- CHECKING PAGES AND MEMORIES......................................................................

- USING THE PAGE COPY/PASTE FUNCTION............................................................

- ERASING MEMORY..............................................................................................

- USING THE ATS MEMORY FEATURE......................................................................

USING THE LIGHT...................................................................................................

USING THE EXTERNAL SHORTWAVE ANTENNA SOCKET.........................................

STEREO/MONO BUTTON.........................................................................................

MUSIC/WIDE and NEWS/NARROW SWITCH............................................................

LINE OUT SOCKET..................................................................................................

USING EARPHONES................................................................................................

REAR FOLDING STAND...........................................................................................

RESET BUTTON.......................................................................................................

INTRODUCTION TO SHORTWAVE............................................................................

TROUBLESHOOTING...............................................................................................

WARRANTY AND SERVICE INFORMATION..............................................................

4

5

• AC adapter

• Stereo earphones

• External wire antenna

• Carrying pouch

• Carrying strap (attached)

• Owner’s manual

NOTE: In the instructions below, numbers in parenthesis (), corre-

spond to the numbered diagrams.

• M-Stereo,AM and Full-Shortwave Coverage (1711-29999 KHz).

• PLL Dual Conversion AM/SW Circuitry With SSB.

• 700 Programmable Memory Presets.

• FM Station Auto Tuning Storage (ATS).

• Alpha-Numeric Four Character Memory Bank Labeling.

• Tunes Via Auto-Scan, Manual-Scan, Direct Key-in Entry and Tuning
Knob.

• Selectable 9/10 kHz AM Tuning Steps.

• Clock, Sleep Timer and Four Programmable Timers (for alarm
or wake-up).

• Weekday Setting.

• World Time Zone Selection.

• Shortwave Narrow/Wide Bandwidth Selection.

• AM/FM News/Music Tone Selection.

• Stereo Earphone Socket.

• Stereo Line-Out Socket.

• Socket For External Shortwave Antenna.

• Display Light.

• Button Lock Feature.

• Included: Owner’s Manual, One-Year Warranty, AC Adapter/Charger
and Protective Case.

• Internally Recharges Ni-MH Batteries.

• Dimensions: 6-5/8”W x 4-1/8”H x 1-1/8”D (167 x 105 x 27 mm).

• Weight: 12.2 oz. (346 g).

1 WHAT THE E-5 INCLUDES

2 FEATURES

E5 OPERATION MANUAL

6

7

3 DIAGRAMS

E5 OPERATION MANUAL

POWER / SLEEP
HOLD
RESET
PAGE/TIME
VOL+/VOL­AUTO SCAN
EDIT/BACKLIGHT SWITCH
MONO/STEREO/SSB INDICATOR
0-9 NUMBER BUTTON
METER BAND
AM BAND
FM BAND
TIME-ZONE BUTTON

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

CHECK BUTTON
ERASE BUTTON
STORE BUTTON
BATTERY
COMPARTMENT (REAR)
SPEAKER
SUPPORT STAND (REAR)
ALARM 1
ALARM 2
ALARM 3
ALARM 4
LCD DISPLAY
CHARGE

RIGHT SIDE

LEFT SIDE

SLEEP
LOCK
ALARM INDICATOR
INFORMATION AREA
AM/FM
USB
WEEKDAY/STATION AREA

26.

27.

28.

29.

30.

31.

32.

FREQUENCY
MHz
KHz
WIDE/NARROW
SIGNAL STRENGTH
STEREO/MONO
CHARGE INDICATOR

33.

34.

35.

36.

37.

38.

39.

LCD DISPLAY

Jog Dial wheel

News/Music Narrow/Wide switch

SSB fine knob

line out

telescopic antenna

external antenna jack
LOCAL/DX switch

earphone jack

external power jack

JOG DIAL WHEEL: Turn the jog dial wheel, combine with other button can adjust time,
frequency, volume and memory operations.

8

9

INSTALLING BATTERIES

The hinged battery compartment (17) is located on the back of the E-

5. To open it, apply thumb pressure to the ribbed, down pointing tri­angle and slide it about 1/8 inch (about 3 mm) towards the bottom of
the radio, then pull up. Install 4 AA batteries, observing the battery
polarity diagrams inside the compartment. When not using recharge­able AA batteries, use alkaline or lithium batteries. Lithium AA batter­ies yield the longest play-time.

BATTERY STRENGTH INDICATOR

The battery strength indicator appears in the upper right side of the
LCD display (24). When batteries are fresh or fully charged, it appears
solid black. As batteries wear down, the segments become clear from
right to left.

CAUTION! - PREVENTING BATTERY ACID LEAKAGE

To avoid battery acid leakage, only use high quality alkaline, lithium
or rechargeable nickel-metal-hydride batteries. Never use old batteries
and never intermix old with new or different brands or types of
batteries, as this may cause damage to the radio and may result

in an explosion causing injury.When the E5 is not being used for a
long period of time, remove the batteries to avoid leakage. Damage
caused by battery acid leakage is not covered by this product’s warranty.
If the batteries leak, don’t throw them away and immediately contact
the manufacturer of the batteries to inquire about their battery leakage
warranty program.

CAUTION! Never attempt to recharge non-rechargeable batteries!

MORE IMPORTANT BATTERY USE INFORMATION

• When using batteries for long periods of time, disconnect the AC
adapter/charger.

• Do not attempt recharging non-rechargeable batteries. Only
recharge rechargeable Ni-MH batteries.

• Replace or recharge batteries when the sound becomes weak and
distorted or the power indicator indicates depleted.

• Stations stored in memory are permanently stored. However, when
power is removed or batteries deplete, the clock reverts to the
default 0:00 setting.

• The clock time will not be lost if batteries are replaced quickly –
within 3 minutes of removal.

POWERING THE E-5 WITH THE INCLUDED AC ADAPTER/CHARGER

To power the E-5 with the included AC Adapter/Charger, first plug it
into an AC wall outlet (also called ‘mains’), then plug the tip into the
6V socket (48) on the lower left side of the E-5. Remove any non­rechargeable batteries from the E-5 while using the included AC
Adapter/Charger.

4 GETTING STARTED

GETTING STARTED

continued

E5 OPERATION MANUAL

10

11

IMPORTANT AC ADAPTER/CHARGER INFORMATION
AND PRECAUTIONS

It is normal for the AC adapter/charger to feel warm during use.
When the AC adapter/charger is connected, the E5 automatically

switches to the AC adapter/charger’s power and installed batteries
are not used.

Disconnect the AC adapter/charger from the power outlet if it is not
being used.

Remove the batteries when using the AC adapter/charger for long
periods of time.

Use only the included AC adapter/charger or one specifically suggested
by Eton Corporation.

The backlight will remain illuminated when using the AC
adapter/charger.

CHARGING NI-MH BATTERIES IN THE E-5

With its included AC adapter/charger connected, the E-5 internally
recharges 4 Ni-MH (nickel-metal-hydride) rechargeable batteries. Note
that the E-5 can still play while the batteries are charging and the
alarm functions will work.

CAUTION! Never attempt to recharge non-rechargeable batteries!

To charge batteries:

1. Install 4 NI-MH batteries, observing the polarity diagram inside the
battery compartment.

2. Connect the AC adapter/charger, first to the wall outlet, then to the E5.

3. Assure that the E5 is turned off.

4. Press the F7 button (25) for about 3 seconds, or until CHG (39)
appears in the upper right of the display and the charging hours
appear in the display.

5. Use the tuning knob (40) to select the charging time in hours
(00-23). See chart below. Press the PAGE/TIME button (4) when
finished. Note in the display that the battery symbol’s segments
continuously activate from left to right during charging. Battery
charging terminates once the set charge time has been reached.

BATTERY CHARGING TIME CHART

The charging times in the chart are based on the following formula:
Charging hours = battery capacity (in milliamp hours) / 100mA (the
charging current).

GETTING STARTED

continued

GETTING STARTED continued

E5 OPERATION MANUAL

Ni-MH BATTERY CHARGING TIME

CAPACITY (in mAh) (hours)

1100 11

1500 15

1800 18

2300 23

12

13

BATTERY CHARGING NOTES AND CAUTIONS

• Never attempt to recharge non-rechargeable batteries!

• The E5 can be played while charging.

• Alarm settings and action are function while charging.

• The AC adapter/charger will not charge the batteries unless the E5
is set to charge mode.

• For improved life of rechargeable batteries, do not repeatedly
charge fully charged batteries.

• When using new rechargeable batteries or ones that have not been

in use for a lengthy period of time, charge them fully, then use
them until they are fully exhausted. Repeat this cycle several more
times to condition the batteries.

• At some point in their life cycle, all rechargeable batteries lose their

ability to charge. When this occurs, it may be all four batteries at
once, or only one of them.When this occurs, replace them all, not
one at a time. Never mix old rechargeable batteries with new and
always start with four, fresh, new Ni-MH batteries.

CAUTION! Never attempt to recharge non-rechargeable batteries!

BEFORE USING THE E5

Assure that it is powered with the AC adapter or batteries.
Assure that it is unlocked. See lock button instructions below.
Place the DX/LOCAL switch (46), on the left side of the E5, to the DX
position.

TURNING THE E-5 ON AND OFF

The E-5 is turned on and off with a quick, short press of the
POWER/SLEEP button (1).

USING THE SLEEP TIMER FEATURE

The sleep timer feature enables the E-5 to play for a specified number
of minutes (00-99), then shut off. The sleep timer feature can be acti­vated and programmed with the E-5 turned on or off. Note that in
sleep mode, the radio plays and the sleep symbol (26) appears in the
display. There are two methods to activate and program the sleep
timer. With either method, the sleep symbol (26) appears in the dis­play after the sleep time is set.

Method 1

1. Use the numeric keypad to enter the desired time (00-99 minutes).

2. Within 3 seconds press the SLEEP button (1). The E5 turns on and
plays for the specified time.

Method 2

1. Press the SLEEP button for about 3 seconds or until the sleep
symbol (26) appears in the display and the E5 turns on.

GETTING STARTED continued

5 BASIC RADIO OPERATION

E5 OPERATION MANUAL

14

15

2. Within 3 seconds, use the tuning knob (40) to select the sleep time
(in minutes) of your choice.

3. Within 3 seconds, press the PAGE/TIME button (4) when finished.

USING THE LOCK FEATURE (2)

With the E5 turned off, the lock feature prevents unwanted turn-on.
When it is turned on, the lock feature prevents unwanted frequency
changes.The lock feature also serves as an audio-mute.

E5 TURNED OFF

Giving the LOCK button (2) a short press causes the lock symbol (27)
to appear in the display and the on/off button does not work.
Deactivate it with a longer press of about 2 seconds.

E5 TURNED ON

Giving the LOCK button (2) a short press disables only the tuning
knob (40). Note that the lock symbol (27) does not appear in the
display. Giving it another short press causes the lock symbol to
appear and disables all buttons. Deactivate it with a longer press
of about 2 seconds.

VOLUME CONTROL

The volume control buttons (5) are labeled +-/VOL.To increase the
volume, push the ‘+’ button. To decrease the volume, push the ‘–‘
button. The E5’s volume is divided into levels, 0-31. When adjusting
volume, the corresponding level number appears in the display.
Volume can be adjusted with the E5 turned on or off. Volume can
also be adjusted using the numeric keypad (9).

To adjust the volume with the numeric keypad:

1. Use the numeric keypad (9) to enter the desired volume level (0-31).

2. Within 3 seconds, press either the + or – VOL button.

USING THE DX/LOCAL SWITCH (46)

The DX/LOCAL switch is located on the left side of the E5 and is labeled
DX/LO. Use DX as the default setting.This gives the E-5 maximum
sensitivity to signals. If strong stations seem distorted, then use the local
setting (labeled LO). This switch does not function in FM mode.

SELECTING FM, AM AND SHORTWAVE (SW)

Turn on the E-5.To select AM press the AM BAND button (11), for FM
press the ‘FM BAND’ button (12) and for shortwave sequentially press
the ‘METERBAND’ button (10) until the shortwave band of your
choice is selected. The last used frequency is automatically displayed.
The most popular shortwave bands can also be accessed with the F1-F7
buttons (F1=49m, F2=41m, F3=31m, F4=25m, F5=22m, F6=19m
and F7=16m).

See more specific information about the E5 and shortwave under the
heading SHORTWAVE WITH THE E5.

SHORTWAVE NOTE: If you’re completely new to shortwave or need

a ‘refresher’, see the special shortwave section toward the end of this
manual.

The frequency digits (33) appear in the lower center portion of the
display.AM and FM is for listening to local stations, while shortwave
brings in stations from around the world.

BASIC RADIO OPERATION continued

BASIC RADIO OPERATION continued

E5 OPERATION MANUAL

When listening to FM or shortwave, fully extend the telescopic antenna
(44). It need not be extended when listening to AM stations (the AM
antenna is located inside the E5).

LISTENING IN FM STEREO

FM stereo can be heard when using earphones/headphones (47) or
when routing the audio to a stereo amplification device from the
‘LINE OUT’ socket (43). To hear FM in stereo, press the ‘ST/MONO’
button (8) while tuned to a FM station. Note that ‘STEREO’ appears
in the display (38) when the stereo mode is selected.

SETTING UP AM AND FM OUTSIDE OF NORTH AMERICA

NOTE: The E-5 is factory set-up for use in North America.To use the

E5 in North America (U.S. or Canada), no changes are needed.
In North America,AM stations are spaced by 10 KHz and the AM
band extends from 520 kHz to 1710 kHz. In most other world areas,
they are spaced by 9 KHz and the band extends from 522-1710 kHz.
Follow these steps to select the 9 kHz AM spacing for outside of
North America:

1. Turn off the E-5.

2. Press the F5 button for about 3 seconds, or until ‘9’ or ‘10’ flashes
in the display.

3. Release the button and give it a quick, short press to toggle to the
other setting.

4. When finished, press the ‘PAGE/TIME’ button (4) twice.

16

17

In North America, the FM band extends from 87.5-108 mHz. In other
parts of the world, it may extend from 87-108.1 or from 76-108.1. To
select the correct range for your region follow these steps:

1. Turn off the E5.

2. Press the F5 button for about 3 seconds, or until ‘9’ or ‘10’
flashes in the display.

3. Release the button and give the PAGE/TIME button (4) a quick,
short press.

4. Sequentially press the F5 button until the beginning FM
frequency of your area appears.

5. Give the PAGE/TIME button (4) a quick, short press.

TUNING IN STATIONS

Described below are four methods of tuning-in stations: Buttons
(6), Tuning-Knob (40), Direct Frequency Entry (9) and Auto-Scan (6).

BUTTONS (6)

Quick, short, sequential presses of the buttons enables tuning up
or down frequency (33)(34)(35). All normal tuning for AM, FM and
shortwave stations can be performed with the buttons.The tuning
steps used are 9 or 10 kHz in the AM band, 5 kHz in the shortwave
bands and 100 kHz in the FM band.

TUNING KNOB (40)

The tuning steps are 1 kHz in AM/SW and 25 kHz FM.

BASIC RADIO OPERATION

continued

BASIC RADIO OPERATION continued

E5 OPERATION MANUAL

18

19

DIRECT FREQUENCY ENTRY (9)

Use this method when the desired frequency of a radio station is
known. AM and SW frequencies are entered in kilohertz (KHz), e.g.
810 KHz or 9475 KHz.; FM frequencies are entered in megahertz
(MHz), e.g. 102.9 MHz, ignoring the decimal point.

To enter a frequency:

1. Use the numeric buttons (9) to enter the frequency.

2. Within 3 seconds, press the AM ‘enter’ button (10) if it’s an AM or
SW frequency, or the FM ‘enter’ button (12) for FM frequencies.

Here’s an example for an AM station at 810 kHz (For FM, ignore the
decimal point and use the FM enter button (12)):

1. Press 8 1 0.

2. Within 3 seconds, press the AM enter button (10).

NOTE: Regardless of what type of station is currently tuned (AM,

FM or SW), direct frequency entry can be used to enter any type of
frequency.

AUTO-SCAN TUNING (6)

Auto-scan tuning starts by pressing either the  (up frequency) or
 (down frequency) button for about 2 seconds. The E-5 has 3

selectable auto-scan modes: STOP, ATS or D-5.These are described
below.Tuning steps are 100 kHz FM, 9/10 kHz AM and 5 kHz SW.
Auto scan tuning remains in the selected band, AM, FM or shortwave
meter band.

STOP: Auto-scanning stops on the next encountered station.
D-5: Auto-scanning stops for 5 seconds on each next encountered

station, then moves on.
ATS: (Auto Tuning Storage):Auto-scanning automatically stores the

strongest FM local stations This feature is describe more thoroughly in
a later section of the manual titled USING THE ATS MEMORY FEATURE.

To select an auto-scan mode:

1. Hold down the F6 button for about 2 seconds, then release. Note
that the last chosen mode flashes in the screen.

2. While the mode flashes, perform quick, short presses of the F6
button to select alternate modes.

SHORTWAVE WITH THE E5

SHORTWAVE NOTE: If you’re completely new to shortwave or need

a ‘refresher’, see the special shortwave section toward the end of this
manual.

There are two ways to select shortwave.

1. Sequentially press the ‘METERBAND’ button (10) until the shortwave
band of your choice is selected.

2. The seven most popular shortwave bands can also be accessed
with the F1-F7 buttons (F1=49m, F2=41m, F3=31m, F4=25m,
F5=22m, F6=19m and F7=16m). In each method, the last used
frequency is automatically displayed. To tune-in shortwave stations,
use the tuning methods described earlier. Below is a band chart
showing the E5’s shortwave coverage.

BASIC RADIO OPERATION continued

BASIC RADIO OPERATION continued

E5 OPERATION MANUAL

E5 AUTO-TUNING CHART

21

20

E5 SHORTWAVE COVERAGE AND TUNING SUGGESTIONS

The E5 has continuous frequency coverage from 150 to 29999 kilohertz
(kHz). This includes Longwave (150-519 kHz), Medium Wave (the AM
broadcast band (520-1710 kHz) and Shortwave (1711-29999 kHz).
To go to a specific shortwave frequency, use the direct-frequency­entry tuning method. When searching for shortwave stations in an
international broadcast band, use manual tuning, the tuning knob
(40) or auto tuning. Direct-frequency- entry, manual tuning and use
of the tuning knob enable tuning anywhere in the shortwave spectrum.
Auto-tuning scans only within the designated frequency limits of
shortwave international bands.With auto-tuning, after one band has
been scanned, tuning resumes in the next band (see auto-tuning
band chart, below).

BASIC RADIO OPERATION continued

BASIC RADIO OPERATION continued

E5 OPERATION MANUAL

SW BAND E5 FREQ. RANGE

(meters) (kilohertz)

120m 2300-2495

90m 3200-3400

75m 3900-4000

60m 4700-5100

49m 5700-6500

41m 6800-7700

31m 9200-10000

25m 11400-12200

22m 13500-13900

19m 15000-15800

16m 17450-17950

13m 21400-21900

11m 25650-26150

22

23

USING THE E5’S SSB (SINGLE SIDE BAND) FEATURE (8)

SSB enables listening to shortwave signals using the single-sideband
mode.This mode is used for a variety of signals including amateur
radio and other two-way communications, Morse code, weather-fax
transmissions and other encoded signals often referred to as ‘utility’
signals.To use SSB, turn on the SSB circuit by pressing the SSB but­ton. Note that SSB appears in the display (31).Tune to the shortwave
frequency of your choice. Use the tuning knob to coarse-tune the
SSB signal, then fine-tune with the –FINE+ knob (42).This SSB circuit
allows tuning of both upper and lower sideband signals. For best SSB
signal clarity, placing the DX/LOCAL switch in the LOCAL position
may be desirable.

SSB NOTE: If you’re new to SSB, see the SSB chart in the LISTENING

TO SHORTWAVE section, later in this manual.

SIGNAL STRENGTH INDICATOR (37)

The signal strength indicator (37) shows relative strength of AM and
SW signals.When signal strengths are somewhat weak, it is normal
for the indicator’s level to fluctuate. The indicator is not functional
with FM signals.

NOTE: Turn off the E5 to set clock and alarm functions. Setting clock

and alarm features require that you work fast between steps. If you
don’t, the set mode will automatically exit. If this occurs, start over.
Carefully read through the procedure first.

SETTING THE CLOCK

The E-5’s clock is a 24-hour format clock. For example, midnight is
00:00 hours; 6 am is 06:00 hours; 1 pm is 13:00 hours and 11 pm is
23:00 hours. Before setting the clock, select and activate your home
time zone, then set the clock.

To select and activate your time zone:
(Use this same procedure to change your time zone when traveling).

1. Quick, short press of TIME ZONE button (13). ‘Tzone’ appears in
the display.

2. Use the tuning knob to select your home time zone (see time zone
abbreviation list below).

3. Long, 3 second press of TIME ZONE button. ‘Tzone disappears from
the display.

BASIC RADIO OPERATION continued

6 CLOCK AND ALARM FEATURES

E5 OPERATION MANUAL

25

To view other time zones:
This allows viewing other time zones without changing the home
time zone.

1. Quick, short press of TIME ZONE button. ‘Tzone’ appears in the
display.

2. Use tuning knob to select desired time zone. Once selected, that
time zone’s time appears in the display for about 30 seconds.

3. To exit T-zone mode earlier, use a quick, short press of the TIME
ZONE button.

SETTING THE ALARMS 1 THROUGH 4 (20-23)

Alarms can be set with the E5 turned on or off.

The E-5 has 4, independently programmable alarm timers (buttons
F1-4) to turn it on at a specified time.Additionally, each timer can be
programmed for a specific weekday, volume, playtime and memory
location.

To set an alarm:
In the procedure below, while setting hour or minutes, pressing one

of the 1-7 buttons selects/deselects the day of the week for the alarm
to activate.While the digits are flashing a box will appear around the
selected day of the week. The box will disappear once set mode is fin­ished, with the box then surrounding only the current day of the
week.

1. With the E-5 turned off, perform a long press of one of the F1-4
buttons (about 3 seconds), causing the hour to flash.

2. Use the tuning knob to set the hour.

CLOCK AND ALARM FEATURES continued

E5 OPERATION MANUAL

24

TIME ZONE ABBREVIATION LIST

ANC-Anchorage HNL-Honolulu
BEG-Beijing JED-Jeddah
BKK-Bangkok KHI-Kashi
CAI-Cairo LAX-Los Angeles
CCS-Caracas LON-London
CHI-Chicago NOU-Noumea
DAC-Dhaka NYC-New York City
DEL- Delhi PAR-Paris
DEN-Denver RIO-De Janeiro
DXB-Dubai SYD-Sydney
GMT-GMT TYO-Tokyo
HKG-Hong Kong WLG-Wellington

SETTING THE CLOCK AND WEEKDAY:

In the clock set procedure below, while the hour or minute digits flash
in steps 2 or 4, press one of the buttons 1-7 to select the day of the
week (32). The ‘1’ button represents Sunday. The selected weekday
will then be within a box.

1. Press the PAGE/TIME button (4) for about 2 seconds or until the
hour digits (29) start flashing.

2. Within 3 seconds, use the tuning knob (40) to set the correct hour.

3. Give the PAGE/TIME button a quick, short press, noting that the
minute digits (29) start flashing.

4. Within 3 seconds, use the tuning knob to set the correct minutes.

5. Allow the minutes to stop flashing. The clock is set.

CLOCK AND ALARM FEATURES continued

26

27

3. Press the PAGE/TIME button (4).

4. Use the tuning knob to set the minutes.

5. Press the PAGE/TIME button.

6. Use the tuning knob to set the wake-up volume.

7. Press the PAGE/TIME button.

8. Use the tuning knob to set the wake-up alarm’s play minutes.

9. Press the PAGE/TIME button.

10. Use the tuning knob to set the page number.

11. Press one of the F1-7 buttons to select the memory location on

the selected page (the square flashes).

12. Press the PAGE/TIME button to finish the set-up.

ACTIVATING/DEACTIVATING THE ALARMS

For an alarm to turn on the radio, it must be activated. To activate
the alarm to be used, turn off the E-5 and press the appropriate
alarm button, F1-4.This causes the timer activation symbol (28) to
appear in the upper left corner of the display, activating the selected
alarm. To deactivate the alarm, press the appropriate F1-7 button,
causing the alarm activation symbol to disappear.

The E5 has 700 memories (also called presets), arranged in 100
pages, with each page holding 7 memories. Buttons F1-7 represent
memory locations.

STORING STATIONS INTO MEMORY

Note that when storing into an already occupied memory position, its
contents will be replaced with your new entry.

1. Turn on the E5.

2. Tune to the desired station.

3. Press the PAGE/TIME button (4) to place the E-5 into MEMO mode.

4. To select the desired memory page (00-99) use the buttons or
hold down the STORE button (16) and use the tuning knob.

5. While holding down the STORE button (16), press one of buttons
F1-7, storing the station into that memory. Note that a box appears
around the selected memory location.

6. Release the STORE button.

7. To store another station, tune to the station and repeat steps 4-6
above.

8. When finished storing stations, press the PAGE/TIME button (4) to
exit MEMO mode.

LABELING MEMORY PAGES

Memory pages can be uniquely labeled with four, intermixed digits or
letters.

1. Select memory mode with the PAGE/TIME button (4). MEMO

appears in the display.

CLOCK AND ALARM FEATURES continued

7 WORKING WITH MEMORY

E5 OPERATION MANUAL

2. Use the buttons to select the desired memory page.

3. Press the EDIT button (7) until ‘_’ appears in the display (about 3
seconds).

4. Use the tuning knob to select the desired number or letter.

5. Press the PAGE/TIME button to select the next ‘_’.

6. Repeat until 4 letters/numbers are selected.

7. Press PAGE/TIME when finished.

ACCESSING WHAT IS STORED INTO MEMORY

1. Enter MEMO mode by pressing the PAGE/TIME button (4), causing
MEMO to appear in the display.

2. Select the desired memory page with the buttons.

3. Select the desired memory with buttons F1-7.

CHECKING MEMORY CAPACITY

While holding down the CHECK button (14), turn the tuning knob to
select memory pages. Empty memories do not have the box around
them.

CHECKING PAGES AND MEMORIES

Checking allows reviewing of pages and their contents, even while
listening.

1. Press and release the PAGE/TIME button (4), causing PAGE to
appear in the display.

29

2. Press or hold down the CHECK button (14) and turn the tuning
knob (40) to select the desired page.

3. While holding down the CHECK button press one of the F1-F7
buttons noting that the stored frequency shows in the display.

USING THE PAGE COPY/PASTE FUNCTION

This feature enables copying memory contents from one page to
another.

1. Press and release the PAGE/TIME button (4), causing PAGE to
appear in the display.

2. Press or hold down the CHECK button (14) and turn the
tuning knob (40) to select the page to be copied.

3. While holding down the CHECK button (14) press and release the
PAGE/TIME button (4).This copies the page.

4. Press or hold down the STORE button (16) and turn the
tuning knob (40), selecting the paste-to page.

5. While holding down STORE press and release PAGE. This pastes the
content of the page.

ERASING MEMORY

1. Enter MEMO mode by pressing the PAGE/TIME button (4), causing
MEMO to appear in the display.

2. Select the desired memory page with the buttons.

WORKING WITH MEMORY continued

E5 OPERATION MANUAL

28

WORKING WITH MEMORY continued

30

31

3. While holding down the ERASE button (15), press the F1-7 button
that you wish to erase. Note that the box surrounding the memory
location disappears.

4. Release the ERASE button.

DELETING ALL MEMORY CONTENTS

Hold down the EDIT and SSB buttons simultaneously, then press
RESET (2). This deletes the contents of all memory pages.

USING THE ATS MEMORY FEATURE

Auto Tuning Storage (ATS) automatically stores the strongest FM local
stations into memory, starting with page 99 and continuing down­ward until all are stored, e.g. 99, 98, 97, etc.

To select and start ATS:

3. Hold down the F6 button for about 2 seconds, then release. Note
that the last chosen mode flashes in the screen.

4. While the mode flashes, perform quick, short presses of the F6 button
to select ATS, then press the PAGE/TIME (4) button.

5. Press the Auto Tuning button for about two seconds to start the
ATS scan.

ATS NOTE: After the ATS scan, if too many memories are filled with

static, try the scan again with the DX/LOCAL switch set in the LOCAL
position.

The light illuminates the display and buttons.There are three light
modes.

Normal Mode: Pressing any button activates the light. The light
automatically turns off after 15 seconds.

Always-On Mode: When powered by its AC adapter, the light
remains always-on when the E5 is turned on.

Manual Light-On/Off Mode: If the light is off, pressing the LIGHT
button (7) activates the light for 15 seconds. Pressing it again within
15 seconds turns the light off.

The external antenna socket is used to connect the E-5 to advanced
performance antennas using a 50 or 75-Ohm coaxial cable feed-line.
There are many such antennas on the market today. Typing in
‘shortwave antennas’ on your favorite Internet search site will provide
further information. Contact Eton Corporation if you have questions
about such antennas.

When listening to FM stations this switch selects stereo or monaural.
Select stereo when using earphones. When not using earphones, it’s
OK to leave it on stereo. In either case, if the FM signal is poor, selecting
mono may improve it.

WORKING WITH MEMORY

continued

8 USING THE LIGHT

E5 OPERATION MANUAL

9 USING THE EXTERNAL SHORTWAVE ANTENNA

SOCKET (45)

10 STEREO/MONO BUTTON (8)

Pull the folding stand from the rear of the E5,
allowing viewing at a comfortable angle.
(see below)

The reset button is located inside the small hole (3) labeled RESET.
If the E5 operates erratically, poke a paper clip into the reset hole
to reset its microprocessor. Performing a reset does not erase what
is stored into the memory locations but does reset the clock to 0:00.

33

14 REAR FOLDING STAND (19)

E5 OPERATION MANUAL

32

Note the wide/narrow diagram in the display (36).
AM/FM – The MUSIC/WIDE position creates a ‘brighter’ music sound.

The NEWS/NARROW position creates a less ‘bright’ sound.
Shortwave – The MUSIC/WIDE position creates the best audio fidelity.

The NEWS/NARROW position helps to minimize interference from
other stations.

This socket provides an industry standard, fixed level audio output
source for safely routing the E5’s audio to the line-in socket of a
stereo system or recording device. Follow your external device’s line­input instructions.The E5’s volume control has no effect on this output.

Earphones/headphones with a 1/8 inch stereo plug can be used. Plug
them into the earphone socket (insert symbol) on the left side of the
radio.Turn the volume down before wearing the earphones, then turn
up the volume to your liking.

11 MUSIC/WIDE AND NEWS/NARROW SWITCH (41)

12 LINE-OUT SOCKET (43)

13 EARPHONE SOCKET (47) AND

USING EARPHONES

15 RESET BUTTON (3)

34

SW BANDS, SSB AND OTHER SHORTWAVE HELP
NEED HELP? CONTACT US.

Eton Corporation
1015 Corporation Way
Palo Alto, CA 94030
USA

U.S. States: 1-800-872-2228
Canada: 1-800-637-1648
Worldwide: 650-903-3866

www.etoncorp.com
Hours of Operation: M-F, 8:30-4, Pacific Time.

WHAT IS SHORTWAVE?

Shortwave is a broadcast frequency range that allows stations to be
heard over vast distances, usually thousands of miles.You’ll hear news
and information, as well as culturally oriented programming, including
music. Some programming is biased or propagandized.

Misconceptions: Note that shortwave has nothing to do with picking
up far away AM and FM stations or picking up local two-way commu­nications such as police, fire, ambulance, local airport traffic and marine
harbor traffic. For example, it is not possible to hear Los Angeles’ AM
and FM stations in New York City. Local two-way communications does
not take place on shortwave, but rather on VHF and UHF frequencies,
requiring the use of a VHF/UHF scanner to hear them.

16 INTRODUCTION TO SHORTWAVE

35

WHAT ARE SHORTWAVE BANDS?

The key to enjoying shortwave is understanding ‘bands’. If you have
ever listened to AM or FM radio, then you already know what a band
is. In North America, the AM band is a frequency range stretching
from 530 to 1710 kilohertz; the FM band is 88-108 megahertz.A
band is a frequency range in which stations are located. To find AM
or FM stations you tune around with the tuning buttons (or the tuning
knob on an analog radio) until you find a station you like. Shortwave
is similar and the shortwave bands have names like 25 meters, 31
meters, 49 meters, etc. These are abbreviated 25m, 31m and 49m.
Just like in AM and FM radio, one simply gets into the shortwave
band and tunes around, looking for stations.

Each band represents a frequency range, as shown in the accompanying
band chart. For example, the 19 meter shortwave band encompasses
the frequency range of about 15100 to 15600 kilohertz. Since some
radios show frequency in megahertz (mHz) and some in kilohertz
(kHz), both are shown here. Look at your radio’s tuning scale or its
digital display to determine which frequency designation it uses in
shortwave. On some shortwave radios these frequencies will look like
15100 kHz, 15105 kHz or 15110 kHz and on other radios they might
look like 15.1 mHz, 15.105 mHz or 15.11 mHz.The exact range of a
band may be slightly different in one band chart or another and may
even vary slightly from one radio to another. This is perfectly OK. On
some radios the band names, e.g. 19 meters, are clearly marked, on
others they are not marked at all. If it is not apparent how to get into
a band on your radio, consult the owner’s manual.

INTRODUCTION TO SHORTWAVE continued

E5 OPERATION MANUAL

36

SIMPLIFIED SHORTWAVE BAND CHART

The table below shows the bands used for shortwave broadcasting.
For more detailed band information enter ‘shortwave broadcast band
allocations’ at an Internet search site.

INTRODUCTION TO SHORTWAVE continued

37

SOME BASIC RULES OF THUMB

• In general, the bands with frequencies below 13 mHz (13000 kHz)
are better at night and the bands with frequencies above 13 mHz
(13000 kHz) are best during the day.The best daytime shortwave
bands are 13, 15, 16, 19, and 22 meters; 16 and 19 usually the
best. At night, the best bands are 25, 31, 41 and 49 meters, with
31 and 49 usually best.

• Around sunset and sunrise, both the day and night bands may be
exceptionally good.

• Shortwave reception is usually better in the winter than at other
times of year.

• Because the construction materials of some buildings severely block
shortwave signals, it may be best to hold the radio in your hands
and get very close to a window or use an external antenna mount­ed next to the window or outside.

SHORTWAVE TIME STATIONS

These stations broadcast Universal Time (GMT), usually 24 hours per day.

CHU-time(Canada) 3330 Best at night
CHU-time(Canada) 7335 Day/Night
CHU-time(Canada) 14670 Best during daylight
WWV-time/weather(US) 2500 Best at night
WWV-time/weather(US) 5000 Best at night
WWV-time/weather(US) 10000 Day/Night
WWV-time/weather(US) 15000 Best during daylight
WWV-time/weather(US) 20000 Best during daylight

INTRODUCTION TO SHORTWAVE continued

E5 OPERATION MANUAL

BAND MEGAHERTZ (MHz) KILOHERTZ (kHz)

120 m 2,300 - 2,495 MHz 2300 - 2495 kHz

90 m 3,20 - 3,40 MHz 3200 - 3400 kHz

75 m 3,90 - 4,05 MHz 3900 - 4050 kHz

60 m 4,750 - 5,1 MHz 4750 - 5100 kHz

49 m 5,73 - 6,3 MHz 5730 - 6300 kHz

41 m 6,89 - 7,60 MHz 6890 - 7600 kHz

31 m 9,25 - 9,95 MHz 9250 - 9995 kHz

25 m 11,5 - 12,2 MHz 11500 - 12200 kHz

22 m 13,57 - 13,87 MHz 13570 - 13870 kHz

19 m 15,005 - 15,825 MHz 15005 - 15825 kHz

16 m 17,48 - 17,9 MHz 17480 - 17900 kHz

15 m 18,9 - 19,02 MHz 18900 - 19020 kHz

13 m 21,45 - 21,85 MHz 21450 - 21850 kHz

11 m 25,67 - 26,1 MHz 25670 - 26100 kHz

38

GETTING CLOSE TO A WINDOW

Getting close to a window may substantially improve reception.
Shortwave signals penetrate single-level wood frame buildings easiest,
while concrete and brick buildings, multi-story and metal roofed struc­tures often block signals. In such situations, position the radio as close
to a window as possible. Holding it may also help. Use an external
antenna if necessary.

SHORTWAVE ANTENNAS

An external shortwave antenna, especially when mounted outside,
can greatly enhance shortwave reception. Some radios are equipped
with special antenna sockets. Eton Corporation does not manufacture
or sell shortwave antennas, however, there are many excellent models
available.A web search such as ‘shortwave antennas’ will result in
many sources for such products.

INTRODUCTION TO SINGLE SIDEBAND (SSB)

Many higher-end shortwave radios have special circuitry enabling
SSB, a highly efficient way of electronically processing transmitted
and received signals for two-way communication. Examples of this
are amateur radio (hams), maritime and aeronautical communication.
Either upper side band (USB) or lower side band (LSB) can be used.
Non-voice methods of communication can also be heard, including
CW (Morse code) and RTTY (radio teletype).

Receiving SSB signals is not always easy. Since this is two-way
communications, transmissions are often very short and sporadic.
Also, most two-way communication uses relatively low power, 50 to

INTRODUCTION TO SHORTWAVE continued

39

1000 watts.The amateur radio operators are easiest to find, Best
results are experienced when using an outdoor shortwave antenna
such as a dipole.

Follow your radio’s instructions on how to engage its SSB feature.
Shown next are some selected frequency ranges on which SSB com­munications can be found. All frequencies are shown in kilohertz.

AMATEUR RADIO SHORTWAVE BANDS (M=METERS)

80m: 3500-4000 17m: 18068-18168
40m: 7000-7300 15m: 21000-21450
30m: 10100-10150 12m: 24890-24990
20m: 14000-14350 10m: 28000-29700

AERONAUTICAL SW FREQUENCY RANGES (USUALLY USB)

2850-3155 11175-11400
3400-3500 13200-13360
4650-4750 15010-15100
5480-5730 17900-18030
6525-6765 21870-22000
8815-9040 23200-23350

10005-10100

INTRODUCTION TO SHORTWAVE

continued

E5 OPERATION MANUAL

40

MARITIME SW FREQUENCY RANGES (USUALLY USB)

4063-4438 18780-18900
6200-6525 19680-19800

8195-8815 22000-22720
12230-13200 25070-25110
16360-17410

SHORTWAVE SSB WEATHER FREQUENCIES AND WEATHER FAX

FREQUENCIES

These are best found online by performing a search using your
favorite Internet search site, searching for ‘shortwave weather
frequencies’; ‘weather fax frequencies’. Your local library and bookstores
may also be helpful.

FINDING SHORTWAVE ANTENNAS

Such resources are best found by performing a search using your
favorite Internet search site, searching for ‘shortwave antennas’ or
the specific antenna type, e.g. ‘shortwave dipole antennas’.Your local
library and bookstores may also be helpful.

SHORTWAVE MAGAZINES

Monitoring Times: 7540 Highway 64 West, Brasstown, NC 28902,
Telephone: [phone].
Website: http://www.monitoringtimes.com.

INTRODUCTION TO SHORTWAVE continued

41

Popular Communications: A publication of CQ Communications, Inc.
25 Newbridge Road, Hicksville, NY 11801-2953, USA.
Telephone: [phone]. www.popular-communications.com.

SHORTWAVE DIRECTORIES

Shortwave directories showing broadcaster’s language, target area,
broadcast time and frequency are listed below.

PASSPORT TO WORLD BAND RADIO Published by International
Broadcasting Services (IBS); IBS North America, Box 300, Penn’s Park
PA 18943. Phone: [phone]. www.passband.com.

WORLD RADIO TV HANDBOOK Published in the USA by Watson-Guptill
Publications, 770 Broadway, 7th Floor, New York, NY 10003-9595.
www.watsonguptill.com.

INTRODUCTION TO SHORTWAVE

continued

E5 OPERATION MANUAL

42

RESET PROCEDURE

Perform a reset if the solutions outlined below don’t resolve the issue.
The RESET button (3) is the small hole on the front right of the E-5.To
perform a reset, assure that fresh batteries are in the E5 or power it
with its AC adapter.Turn the E5 off and poke a paper clip into the hole.

WILL NOT TURN ON

1. Assure that the LOCK feature is not engaged.

2. Assure that the radio has power (batteries installed or AC adapter
plugged in).

3. Assure that batteries are inserted with correct polarity

4. Assure that the batteries are not depleted

5. If using an AC adapter, assure that it is plugged into the household
outlet (mains socket) and into the E5’s DC socket. Also, assure that
the AC adapter is of the correct DC voltage output and polarity and
that its plug-tip is of the correct inner and outer diameter.

SHUTS OFF ABRUPTLY WHILE PLAYING DURING BATTERY USE

This is caused by depleted batteries. Replace them.

SHUTS OFF ABRUPTLY WHILE BEING MOVED DURING
AC ADAPTER USE

This is usually caused by a broken wire or loose connection in the AC
adapter’s cord or if the AC adapter’s plug-tip is of the wrong diameter.

OPERATES ERRATICALLY

Perform a RESET, as described in the section titled RESET PROCEDURE.

17 TROUBLESHOOTING

43

STATIONS ARE RECEIVED TOO WEAK

• Assure that the ANTENNA GAIN switch is set to the DX position.

• Assure that the telescopic antenna is pulled up all the way for FM
and Shortwave reception.

• When listening to AM stations, swivel the radio. The AM internal
ferrite bar antenna is highly directional.

THERE IS NO SOUND FROM THE SPEAKER (18)

Assure that earphones/headphones are not plugged in and that the
volume control is turned up.

A STATION CAUSES SEVERE AUDIO DISTORTION, BUT SEEMS
TO BE VERY STRONG IN SIGNAL STRENGTH

This is probably a strong, local station, very close to your location.
Because of its close proximity, its signal is too strong. To reduce signal
strengths, place the DX/LOCAL switch into the LOCAL position.

THE BATTERY COMPARTMENT HAS A STICKY LIQUID OR
DRIED WHITE POWDER IN IT

This is the result of battery acid leakage.To avoid battery acid leakage,
only use high quality alkaline or rechargeable nickel-metal-hydride
batteries. Never intermix old with new, or different brands or types of
batteries. If the batteries leak, immediately contact the manufacturer
of the batteries and don’t throw them away. Damage caused by battery
acid leakage is not covered under warranty.

TROUBLESHOOTING continued

E5 OPERATION MANUAL

44

You may contact Eton Corporation Service Department for additional
information or assistance by calling toll-free Monday through Friday,
8:30am -4:00pm Pacific Standard Time:

1(800) 872-2228 (US)
1(800) 673-1648 (CN)
650-903-3866 (World-wide)

Call for a Return Authorization prior to shipping your unit. Should you
want to return your unit for service, pack the receiver carefully using
the original carton or other suitable container. Write your return
address clearly on the shipping carton and on an enclosed cover letter
describing the service required, symptoms or problems.Also, include
your daytime telephone number and a copy of your proof of purchase.
The receiver will be serviced under the terms of the Eton Corporation
Limited Warranty and returned to you.

ONE YEAR LIMITED WARRANTY

Etón warrants to the original purchaser this product shall be free from
defects in material or workmanship for one year from the date of
original purchase.

During the warranty period Etón or an authorized Etón service facility
will provide, free of charge, both parts and labor necessary to correct
defects in material and workmanship.At their option, Etón may
replace a defective unit.

(1) Complete and send in the Warranty Registration Card within

ten (10) days of purchase.

18 SERVICE INFORMATION

45

(2) Call Etón or the nearest authorized service facility, as soon

as possible after discovery of a possible defect. Have ready:
(a) the model and serial number.
(b) the identity of the seller and the approximate date of purchase.
(c) a detailed description of the problem, including details on
the electrical connection to associated equipment and the list of
such equipment.

(3) Etón will issue a Return Authorization number and the address

to which the unit can be shipped. Ship the unit in its original
container or equivalent, fully insured and shipping charges prepaid.

Correct maintenance, repair, and use are important to obtain proper
performance from this product. Therefore carefully read the Instruction
Manual. This warranty does not apply to any defect that Etón
determines is due to:

(1) Improper maintenance or repair, including the installation of parts

or accessories that do not conform to the quality and specification

of the original parts.
(2) Misuse, abuse, neglect or improper installation.
(3) Accidental or intentional damage.
(4) Battery leakage.

All implied warranties, if any, including warranties of merchantability
and fitness for a particular purpose, terminate one (1) year from
the date of the original purchase.The foregoing constitutes Eton
Corporation entire obligation with respect to this product, and the
original purchaser shall have no other remedy and no claim for
incidental or consequential damages, losses, or expenses. Some states
do not allow limitations on how long an implied warranty lasts or do

SERVICE INFORMATION continued

E5 OPERATION MANUAL

46

not allow the exclusions or limitation of incidental or consequential
damages, so the above limitation and exclusion may not apply to you.
This warranty give you specific legal rights and you may also have
other rights, which vary from state to state.

For service information contact:

Eton Corporation
1015 Corporation Way
Palo Alto, CA 94303
U.S.A.

SERVICE INFORMATION continued

47

E5 OPERATION MANUAL

SOMMAIRE

CE QUE COMPREND LE POSTE E5..............................................................................

CARACTÉRISTIQUES DU POSTE E5.............................................................................

SCHÉMAS...................................................................................................................

POUR COMMENCER...................................................................................................

- MISE EN PLACE DES PILES ET INFORMATION SUR LES PILES...................................

- INFORMATION SUR L’ADAPTATEUR AC/DC..............................................................

- CHARGE DES PILES NI-MH DU POSTE E5.................................................................

FONCTIONNEMENT DE BASE DE LA RADIO...............................................................

- AVANT D’UTILISER LE POSTE E5; MISE EN MARCHE ET EXTINCTION;

UTILISATION DE LA FONCTION SOMMEIL................................................................

- UTILISATION DE LA FONCTION VERROUILLAGE.......................................................

- RÉGLAGE DU VOLUME.............................................................................................

- UTILISATION DU COMMUTATEUR DX/LOCAL..........................................................

- SÉLECTION FM, AM et ONDES COURTES (SW)........................................................

- RÉCEPTION FM STÉRÉO..........................................................................................

- RÉGLAGES AM ET FM EN DEHORS DE L’AMÉRIQUE DU NORD...............................

- RÉGLAGE DES STATIONS.........................................................................................

- TOUCHES........................................................................................................

- BOUTON DE RECHERCHE........................................................................................

- ENTRÉE DIRECTE DE FRÉQUENCE............................................................................

- SYNTONISATION À BALAYAGE AUTOMATIQUE........................................................

- LE POSTE E5 ET LES ONDES COURTES.....................................................................

- INDICATEUR DE PUISSANCE DU SIGNAL.................................................................

FONCTIONS HORLOGE ET SOMMEIL..........................................................................

- RÉGLAGE DE L’HEURE..............................................................................................

- RÉGLAGE, ACTIVATION ET DÉSACTIVATION DES ALARMES.....................................

UTILISATION DE LA MÉMOIRE....................................................................................

- MISE EN MÉMOIRE DES STATIONS...........................................................................

- REPÉRAGE DES PAGES MÉMOIRE.............................................................................

- ACCÈS AUX DONNÉES STOCKÉES.............................................................................

- VÉRIFICATION DE LA CAPACITÉ MÉMOIRE...............................................................

- VÉRIFICATION DES PAGES ET DE LA MÉMOIRE........................................................

- UTILISATION DE LA FONCTION COPIER/COLLER PAGE.............................................

- EFFACEMENT MÉMOIRE...........................................................................................

- UTILISATION DE LA FONCTION MEMOIRE ATS.........................................................

UTILISATION DE L’ÉCLAIRAGE.....................................................................................

UTILISATION DE LA PRISE D’ANTENNE ONDES COURTES EXTERNE............................

SÉLECTEUR STEREO/MONO........................................................................................

COMMUTATEUR MUSIC/WIDE ET NEWS/NARROW....................................................

SORTIE HAUT NIVEAU.................................................................................................

UTILISATION DU CASQUE D’ÉCOUTE..........................................................................

SUPPORT ARRIÈRE ESCAMOTABLE..............................................................................

BOUTON RESET (REMISE À ZÉRO)..............................................................................

INTRODUCTION AUX ONDES COURTES......................................................................

DÉPANNAGE...............................................................................................................

GARANTIE ET SAV.......................................................................................................

49

E5 MANUEL D’ OPÉRATION

48

VOUS AVEZ BESOIN D’AIDE?
Voici comment nous contacter:

Merci d’avoir acheté ce poste de radio E5 AM/ FM/Ondes courtes.
Nous désirons avant tout que vous profitiez pleinement de cet
appareil. Afin d’utiliser au mieux ses fonctions nombreuses, excellentes
et uniques, nous ne pouvons que vous inciter à lire attentivement ce
manuel d’utilisation. Si, au cours de sa lecture, vous éprouviez quelque
difficulté, veuillez nous contacter par l’un des moyens ci-dessous.

Du lundi au vendredi, de 8 h 30 à 16 h 00,, Heure nord-américaine,
côte ouest.

1-800-872-2228 depuis les U.S.A.
1-800-637-1648 depuis le Canada
1-650-903-3866, depuis le reste du monde
PAR TÉLÉCOPIE: 650-903-3867
Site Internet : www.etoncorp.com
Adresse postale:
Etón Corporation
1015 Corporation Way
Palo Alto, CA 94303
USA

1
2
3
4

5

6

7

8

9
10
11
12
13
14
15
16
17
18

50
51
52
54
54
56
57
60

60
61
62
62
62
63
64
65
65
65
65
66
67
70
71
71
73
76
76
77
77
78
78
78
79
79
80
81
81
82
82
82
83
83
84
93
96

51

• FM Stéréo,AM et une couverture complète en ondes courtes
(1711 à 29999 kHz)

• Circuits de conversion double PLL (à boucle à verrouillage de phase)
AM/SW avec SSB.

• 700 mémoires RAM programmables

• Stations FM préréglées (Auto Tuning Storage ou ATS).

• Repérage banque mémoire alphanumérique à quatre caractères

• Recherche automatique, manuelle, entrée directe de fréquence et
bouton de réglage analogique

• Pas de réglage AM 9/10 kHz.

• Fonctions horloge, sommeil et 4 alarmes programmables (alarme
ou réveil).

• Réglage du jour

• Sélection du fuseau horaire

• Sélection de largeur de bande ondes courtes Narrow/Wide
(étroite/large)

• Sélection AM/FM News/Music Tone (Informations/Sonnerie musicale)

• Prise casque stéréo.

• Prise haut niveau stéréo

• Prise d’antenne ondes courtes externe

• Écran LCD rétro-éclairé.

• Bouton de verrouillage

• Y compris : Manuel d’utilisation, garantie d’un an, adaptateur/chargeur
AC/DC et housse de protection

• Batterie Ni-MH à recharge intégrée

• Dimensions : L 6-5/8" x H 4-1/8" x P 1-1/8" (167 x 105 x 27 mm)

• Poids : 12,2 oz. (346 g).

2 CARACTÉRISTIQUES DU POSTE E5

E5 MANUEL D’ OPÉRATION

50

• Adaptateur AC/DC.

• 4 piles rechargeables Ni-MH

• Casque d’écoute stéréo.

• Une antenne filaire externe.

• Housse de transport.

• Bandoulière (attachée).

• Manuel d’utilisation

NOTA: Dans les instructions ci-dessous, les nombres entre parenthès-

es correspondent aux numéros des schémas.

1 CE QUE COMPREND LE POSTE E5

33.

34.

35.

36.

37.

38.

39.

26.

27.

28.

29.

30.

31.

32.

52

3 SCHÉMAS

53

E5 MANUEL D’ OPÉRATION

ALIMENTATION/SOMMEIL
VERROUILLAGE
REMISE A ZERO
PAGE/HEURE
VOL+/VOL­AUTO SCAN
COMMUTATEUR EDIT/BACK­LIGHT (EDIT/RETRO ECLAIRAGE)
INDICATEUR MONO/STEREO/SSB
TOUCHE NUMERIQUE 0…9
BANDE METRIQUE (ondes courtes)
BANDE AM
BANDE FM
TOUCHE FUSEAU HORAIRE

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

24.

25.

SOMMEIL
VERROUILLAGE
INDICATEUR D'ALARME
ZONE D'INFORMATION
AM/FM
USB
JOUR/ZONE STATION

FREQUENCE
MHz
KHz
LARGE/ETROIT
PUISSANCE SIGNAL
STEREO/MONO
INDICATEUR DE CHARGE

IDENTIFICATION ÉCRAN LCD

bouton de recherche

bouton de reglage fin SSB
sortie haut niveau

antenne telescopique

prise ant. ext.
commutateur local/distant

prise casque

prise alim. ext.

commutateur informations/musique
etroit/large

TOUCHE DE VERIFICATION
TOUCHE EFFACEMENT
TOUCHE STOCKAGE
MEMOIRE
COMPARTIMENT PILES
(ARRIERE)
HAUT-PARLEUR
SUPPORT (ARRIERE)
ALARME 1
ALARME 2
ALARME 3
ALARME 4
ECRAN LCD/AFFICHEUR LCD
CHARGE

COTE DROIT

COTE GAUCHE

54

MISE EN PLACE DES PILES

Le compartiment piles (17) sur charnières, est situé à l’arrière du poste
E5. Pour l’ouvrir, appuyez avec le pouce sur le triangle strié pointant
vers le bas et glissez-le d’environ 1/8 de pouce (environ 3 mm) vers le
bas du poste de radio, puis tirez vers le haut. Installez 4 piles AA, en
respectant la polarité indiquée sur les schémas à l’intérieur du compar­timent. Si vous n’utilisez pas de piles AA rechargeables, choisissez des
piles alcalines ou au lithium. Les piles au lithium permettent la durée
d’écoute la plus longue.

INDICATEUR DE CAPACITÉ DES PILES

L’indicateur de capacité des piles apparaît en haut à droite de l’af­ficheur LCD (24). Lorsque les batteries sont neuves ou complètement
chargées, il s’affiche totalement en noir. Lorsque les piles s’usent,
les segments s’éclaircissent de la droite vers la gauche.

ATTENTION: PRÉVENTION DES FUITES D’ACIDE DES PILES

Pour éviter que l’acide des piles ne fuie, utilisez uniquement des piles
alcalines de qualité supérieure, des piles au lithium ou des piles

4 POUR COMMENCER

55

rechargeables nickel-hydrure métallique. N’utilisez jamais de piles
usées et ne mélangez jamais des piles neuves avec des vieilles, ni des
piles de marques ou de types différents, car ceci pourrait endommager
le poste de radio ou entraîner une explosion et blesser quelqu’un.
Lorsque le poste E5 n’est pas utilisé pendant une longue durée,
enlevez les piles pour éviter qu’elles ne coulent. Les dommages
causés par les fuites d’acide des piles ne sont pas couverts par la
garantie. Si les piles fuient, ne les jetez pas, mais contactez immédi­atement le fabricant des piles pour vous informer de la garantie
prévue en cas de fuite de ces dernières.

ATTENTION!

N’essayez jamais de recharger des piles non rechargeables!

INFORMATIONS COMPLÉMENTAIRES CONCERNANT LES PILES

• Lorsque vous faites fonctionner le poste sur piles pendant un temps

assez long, débranchez l’adaptateur/chargeur AC/DC.

• N’essayez pas de recharger des piles non rechargeables. Ne rechargez

que des piles Ni-MH rechargeables.

• Remplacez ou rechargez les piles lorsque le son faiblit et se déforme

ou lorsque l’indicateur de capacité affiche la décharge.

• Les stations mises en mémoire le sont en permanence.Toutefois,

lorsque l’alimentation est coupée ou lorsque les piles sont usées,
l’horloge affiche par défaut 0:00.

• L’affichage de l’heure ne sera pas effacé si les piles sont remplacées

rapidement, dans les 3 minutes.

POUR COMMENCER continué

E5 MANUEL D’ OPÉRATION

Faible

Moyenne

Supérieure

Pleine

56

ALIMENTATION DU POSTE E5 À L’AIDE DE
L’ADAPTATEUR/CHARGEUR AC/DC FOURNI

Pour alimenter le poste E5 à l’aide de l’adaptateur/chargeur AC/DC
fourni, commencez par brancher ce dernier dans une prise de courant
réseau ; enfoncez ensuite la fiche dans la prise 6V (48) située à
gauche et en bas du poste E5. Enlevez toute pile non rechargeable
lorsque vous alimentez le poste E5 à l’aide de l’adaptateur/chargeur
AC/DC fourni.

INFORMATION IMPORTANTE CONCERNANT L’ADAPTATEUR
AC/DC ET PRÉCAUTIONS À PRENDRE

Il est normal que l’adaptateur/chargeur AC/DC chauffe lorsqu’il est en
service.

Lorsque l’adaptateur/chargeur AC/DC est branché, le poste E5 commute
automatiquement sur l’alimentation adaptateur/chargeur AC/DC et les
piles installées ne sont pas utilisées.

Débranchez l’adaptateur/chargeur AC/DC de la prise réseau lorsqu’il
n’est pas en service.

Enlevez les piles lorsque vous utilisez l’adaptateur/chargeur AC/DC
pendant un temps assez long.

N’utilisez que l’adaptateur/chargeur AC/DC fourni ou un
adaptateur/chargeur conseillé par Etón Corporation.

Le rétro-éclairage continue de fonctionner lorsque l’adaptateur/chargeur
AC/DC est utilisé.

POUR COMMENCER continué

57

CHARGE DES PILES NI-MH DU POSTE E5

Lorsque l’adaptateur/chargeur AC/DC est branché, le poste E5 recharge
une batterie intégrée composée de 4 piles rechargeables Ni-MH
(nickel-hydrure métallique). Notez que le poste E5 continue de fonc­tionner pendant que la batterie est en charge et que les alarmes
restent opérationnelles.

ATTENTION! N’essayez jamais de recharger des piles non

rechargeables!

Pour charger les piles :

1. Installez 4 piles Ni-MH, en respectant la polarité indiquée sur les
schémas à l’intérieur du compartiment batterie.

2. Branchez l’adaptateur/chargeur AC/DC, d’abord sur une prise
murale, puis sur le poste E5.

3. Assurez-vous que le poste E5 soit éteint.

4. Appuyez sur la touche F7 (25) pendant environ 3 secondes, ou
jusqu’à ce que l’afficheur indique CHG en haut à droite et que le
temps de charge apparaisse à l’écran.

5. A l’aide du bouton de recherche (40), sélectionnez le temps de
charge, en heures (00-23).Voir tableau ci-dessous. Lorsque c’est
fait, appuyez sur la touche PAGE/TIME (4). Notez que sur l’afficheur,
les segments du symbole batterie sont activés continuellement, de
la gauche vers la droite, pendant la charge. Une fois terminé le
temps de charge présélectionné, la charge de la batterie s’arrête.

POUR COMMENCER continué

E5 MANUEL D’ OPÉRATION

58

TABLEAU DES TEMPS DE CHARGE DE LA BATTERIE

Les temps de charge du tableau sont basés sur la formule suivante:
Temps de charge (en heures) = capacité de la batterie (en milliampères
heures)/100 mA (le courant de charge).

CHARGE DE LA BATTERIE – NOTES ET AVERTISSEMENTS

• N’essayez jamais de recharger des piles non rechargeables!

• Le poste E5 peut fonctionner pendant la charge.

• Les alarmes peuvent être réglées et sont opérationnelles pendant
la charge.

• L’adaptateur/chargeur AC/DC ne chargera pas la batterie tant que
le poste E5 ne sera pas en mode charge.

• Pour améliorer la durée de vie des piles rechargeables, ne chargez
pas constamment des piles déjà complètement chargées.

• Lorsque vous utilisez des piles neuves rechargeables ou des piles qui
n’ont pas été utilisées depuis longtemps, chargez-les complètement

POUR COMMENCER continué

59

et utilisez-les jusqu’à ce qu’elles soient complètement déchargées.
Répétez ce cycle plusieurs fois pour rendre les piles aptes à l’emploi.

• Au bout d’un certain temps, toutes les piles rechargeables perdent
leur capacité de charge. Dans ce cas, il se peut qu’il s’agisse des
quatre piles en même temps ou seulement de l’une d’entre elles.
Remplacez alors l’ensemble des piles et non une à la fois. Ne
mélangez jamais les vielles piles rechargeables avec les neuves
et repartez toujours avec quatre piles neuves Ni-MH chargées.

ATTENTION! N’essayez jamais de recharger des piles non

rechargeables!

POUR COMMENCER continué

E5 MANUEL D’ OPÉRATION

CAPACITÉ BATTERIE TEMPS DE CHARGE

Ni-MH (en mAh) (en heures)

1100 11

1500 15

1800 18

2300 23