Congratulations on purchasing a Pocket PC. Due to the size and
capabilities of this Pocket PC, you can keep your most important business
and personal information up-to-date and close at hand. Microsoft
ActiveSync
synchronize the information on your desktop or laptop computer with your
Pocket PC. Picture yourself in the following situations:
While walking with a colleague, your Pocket PC device rings. You look at
increases the power of your Pocket PC by allowing you to
the caller ID and see it’s your manager who is calling. She asks if you two
are free this afternoon for an emergency meeting. While your colleague
fumbles through his paper organizer, you press a button on your Pocket
PC and instantly see a list of today’s appointments and meetings. You are
quickly able to tell your manager your available times, and make a note of
the new meeting while on the call. You hang up, send an e-mail with a
schedule request for the three of you at the desired location.
You’re meeting your friends tonight for dinner and a movie. You
download the latest movie information from the Internet to your desktop
computer and then synchronize it with your Pocket PC. At dinner, you
pull out your Pocket PC device and review your movie options with your
friends.
A Calendar reminder alerts you that it is time to catch the bus. You grab
your Pocket PC device and catch the bus just in time. Because ActiveSync
keeps the information on your Pocket PC up-to-date, you leisurely review
your task list, make notes about the new books and CDs you want to buy,
and read and respond to e-mail messages. When you get back to the office,
ActiveSync transfers any task changes you made, your notes, and your
e-mail message responses to your desktop computer.
Safety Instructions
This product is not charged when shipped from the factory.When you
♥
use this product the first time, we recommend that you install the battery
as illustrated and fully charge it for about 8 hours before use.
Before you remove the main battery or install the SIM card, kindly
♥
confirm that the remaining power of the backup battery is over 50 % to
prevent data loss. To check the battery power, tap
System tab, and then Power.
Before you install the SIM card, make sure that you turn off your phone
♥
and GPRS connection function, press the “Power Button” and then
install the SIM card.Otherwise, abnormal disconnection problems will
occur.
Tap the icon to disable the Phone function on the Pocket PC while
♥
in places such as airplanes and hospitals that ban the use of mobile
phones.Tap the
Pocket PC.Pressing the “Power Button” at the top of the Pocket PC will
only turn off the screen.
In case the Pocket PC is damaged, send it back to the dealer for repair.
♥
Do not attempt to disassemble the Pocket PC on your own; otherwise the
warranty will be void.
icon to actually close the Phone function on the
, Settings, the
Where to Find Information
For information on: See this source:
Programs on your Pocket PC This User’s Guide and Pocket PC Help. To
Pocket PC, stylus, battery, Companion CD, User Guide, AC adapter,
USB cable, charger or USB cradle, travel charger, headset and leather case.
Pocket PC Stylus
User Guide AC AdapterUSB CableCharger or USB Cradle
Battery
Companion CD
Getting Started 1-1
External Views
1
2
3
4
5
15
18
6
9 10
13 14
Camcorder
1
Voice Commander
3
Earphone and microphone jack 6 Infrared (IR) port
5
SD/MMC card slot
7
Bluetooth LED indicator
9
LED indicator
11
13
15
Speed dial/Contacts hot key
Send button
7
16
19
8
11
12
17
20
Volume control key
2
Reset button
4
Power button
8
Cell Phone speaker
10
Touch screen
12
14
16
M-Desk/Today screen hot key
Navigation button. Press the center
of the button to set as launch key.
17
19
End button
Charger or USB cradle
connector
Microphone
18
Stylus holder. Slide the stylus out
20
of the holder.This is a two-stage
push-pull stylus.
Hidden antenna
21
Built-in camera lens/ flash/preview
22
mirror
Speaker
23
Press the fixing lock button to
25
Back cover. Battery is inside.
24
open
1-2
21
22
23
24
25
Hardware Hotkey Functions
Hardware
Button
Short Press
(Press once and release)
Camcorder Video recorder
Zoom in/out during camera mode
Adjust volume
Voice Commander
Reset Button
Power Button = open or close screen Enable or disable backlight
Power Button + Reset Button = cold
boot
Frequently Dialed → Index Dial
→
Contacts
M-Desk → Today screen
Hang up during call
Disconnect during GPRS
connection
Skip to Today’s screen while in
other programs
Connect to Phone / dial / redial /
answer
--
Connect to Notes
--
--
--
--
Enable or disable the
speakerphone
Long Press
(Press for a few seconds
and release)
Turn off phone if it is on
Turn on phone when it is
off
Getting Started 1-3
Rear Side
Insert the SIM card into the SIM
1
card slot with its golden contacts
facing down. Follow the picture
indicated on the Pocket PC.
Main battery
3
Main battery lock
5
Installing the SIM Card
Back cover
2
Follow the direction in the
4
illustration to install the main battery.
Fixing lock button for the back cover
6
Unlock
5
6
2
3
1
Installing the Battery
4
Caution!
Before you remove the main battery, make sure that the remaining power
1.
of the backup battery is over 50 % to prevent data loss. To view the
battery power, tap , Settings, the System tab, and then Power.
When you remove the main battery, the system operation will be powered
2.
temporarily by the backup battery. Reinstall the main battery as quickly
as possible to prevent data loss. Also, note that the backup battery is
charged through the main battery power.
Lock
1-4
Using the Pocket PC for the First Time
Charging Power and Power Supply
USB port: Use the USB cable included with the product package to
connect the Pocket PC to the desktop computer through this port.
AC adapter power jack.
To remove the back cover, press the fixing lock button on the rear side of
1.
the Pocket PC. Unlock the main battery lock and remove the main battery.
(If you are opening this product for the first time, the main battery and the
Pocket PC are packed separately inside the product package.)
Install the main battery properly and lock the battery securely.Slide the
2.
back cover into the groove until you hear a click to indicate that the back
cover lock is locked properly.
Getting Started 1-5
Connect the round plug from the AC adapter to the power connector and
3.
connect the other AC adapter plug to any household power outlet.The
Pocket PC starts to charge automatically.
Cold Boot: Press and hold the “Power Button” with one hand, and use the
4.
stylus tip to press the “Reset Button” with the other hand. Release the
“Power Button” and the “Reset Button” at the same time.Wait for the
Pocket PC to restart and follow the instructions on the screen to complete
screen alignment.
It will take about 8 hours to fully charge the battery after the first time you
5.
open the package. Subsequent charging will only take about 3 hours.After
charging, you can disconnect the AC adapter and carry the Pocket PC
around portably.To maintain smooth operation, charge the power
regularly.
View the battery icon on the upper right corner to check the power
6.
usage condition.
The LED indicator on the upper right of Pocket PC will display the
7.
charging and function usage status.
Charging Fully charged Insufficient power
Red LED lights up Red LED goes off Red LED flashes
Phone is on Caution or Warning
Green LED flashes Orange LED flashes quickly
If you purchase an additional main battery, you can insert it into the
charging slot at the back of the charger. The LED indicator on the side of
the charger displays the charging status.
Charging Fully charged No battery
Red LED lights up Green LED lights up LED is off
1-6
Configuration Wizard
When you use the Pocket PC for the first time or during cold boot, the
system will request screen alignment.Tap on the center of the cross (+)
continuously and follow the screen instructions to complete the operation.
Next, the Configuration Wizard will guide the beginners to continue
setting up the phone, button, system and connection items.
Tap on the buttons to set up the
relevant items.
Proceed to the next step.
If you exit without completing the
setup for these items, you can still
complete the setup anytime, if
necessary.
To switch to Configuration
Wizard, tap
Utilities, and then Configuration
Wizard.
, Programs,
Using the Stylus to Touch the Screen
Your Pocket PC is designed for graphics-based operation.Generally
speaking, we usually “use the stylus to perform basic actions such as tap
drag
, and tap and hold” on the touch screen.Other actions such as reset and
cold boot will require the use of the stylus tip.
,
Pull the stylus to full-length to make it easier to tap the screen during
operation. When kept completely in the stylus holder, the stylus length
shortens.
Getting Started 1-7
Travel Charger
Connect the flat end on the USB cable to the charger or USB cradle
connector on the bottom of the Pocket PC.
Connect the other end of the USB cable to the USB port on the desktop
computer.
Connect the round plug from the AC adapter to the power connector on
the USB cable.
Connect the other AC adapter plug to any household power outlet.The
Pocket PC starts to charge automatically.
If you use the travel charge accessory without connecting the AC
adapter, you can still charge the battery by connecting the Pocket PC to the
USB cable that is connected to a desktop computer.However, this should not
be considered as theonly charging method.We recommend that you follow
the normal charging method by using an AC adapter.
1-8
Re-installation or Replacing the Battery
Caution!
Before you remove the main battery, make sure that the remaining power
of the backup battery is over 50 % to prevent data loss. To view the battery
power, tap , Settings, the System tab, and then Power.
If the phone or GPRS connection function is already activated,
deactivate it first and run the next step; otherwise abnormal disconnection
will occur.
Press the fixing lock button on the rear side of the Pocket PC and remove
1.
the back cover.
Slide the main battery lock down to open the main battery lock. Now you
2.
can easily remove the battery.
Replace the main battery and lock it properly.When you remove the main
3.
battery, the system operation will be powered temporarily by the backup
battery.But data will be lost if the main battery is not installed within 1
minute.
Slide the back cover into the groove until you hear a click to indicate that
4.
the back cover lock is locked properly.
UnlockLock
Follow the directions in the figure to install or remove the battery
properly.
Back cover lock.
Main battery lock. Slide down to unlock and slideup to lock.
Getting Started 1-9
Power On and Off
Power Button
Sleep Mode
Press the “Power Button” at the top of the Pocket PC to enter the Sleep
1.
mode.At this time, the screen is turned off and all peripheral devices enter
the power-saving mode.But if the phone is turned on, it is still in the call
waiting mode.
To turn on the screen later, just press the “Power Button.”
2.
Tap
3.
Power and then the Advanced tab
to set the device to turn off
automatically after waiting for a
certain time period.
, Settings, the System tab,
1-10
Turn on the Screen
This product is designed with a power-saving feature.If the screen is
turned off, press the “Power Button” at the top of the Pocket PC to turn it on.
If the screen is too dark and you
cannot see clearly, set the proper
brightness level for the backlight.
Here are two methods that you can
use:
Long press “Power Button” to turn
1.
the backlight on or off.
Tap
2.
Backlight and then the Backlight
Level tab.
, Settings, the System tab,
Getting Started 1-11
Restarting the Pocket PC
Reset: Use the stylus to press the “Reset Button” on the side of the Pocket
PC.
Cold Boot: Press and hold the “Power Button” with one hand, and use the
stylus tip to press the “Reset Button” with the other hand. Release the
“Power Button” and the “Reset Button” at the same time.Wait for the
Pocket PC to restart and follow the instructions on the screen to complete
screen alignment. Tap on the center of the cross (+) continuously and
follow the screen instructions to complete the operation.
Caution!
After performing a cold boot, the system will retain Microsoft Windows,
1.
pre-installed programs and files saved in the Flash Disk.Other items such
as the user’s input data, newly installed programs and user settings will be
lost.
After performing a system reset, the above-mentioned data will be
2.
retained.
1-12
UUssiinngg tthhee PPoocckkeett PPCC
22
Start
Screen
Tap , Settings, the System tab, and then Screen.
/
/
The first time you use or cold boot the pocket PC, the system will ask
you to align the screen.Kindly continue to tap the center of each cross (+)
that appears and follow the screen instructions to complete the operation.If
you feel that the position is not quite accurate while tapping on the screen,
you follow the help for this section to align the screen again.
Orientation:
Portrait (default)
Landscape (right-handed)
Landscape (left-handed)
Tap the“Align Screen” button to
calibrate the screen.When Align
Screen appears, use the stylus to
tap the center of the cross (+) until
the next cross appears, then follow
the screen instructions to complete
the operation.Finally, tap
exit.
to
Text Size tab: Forselecting the
desired text size.
Using the Pocket PC 2-1
Today Screen
When you turn on your Pocket PC for the first time each day (or after 4
hours of inactivity), you will see the “Today screen”.You can also display it
by tapping
glance the important information for the day.
and then To da y.On the “Today screen”, you can see at a
program.
Tap to enable or disable the GPRS
connection feature.
phone on or off.
volume.
Current battery status.
Time. Tap to display the current
date and time, and the upcoming
appointments. Tap and hold to
select analog or digital clock
display from the list.
Start. Tap to switch to a
Antenna icon. Tap to turn the
Speaker icon. For adjusting
Today screen.Displays important information for the day. Tap on any item
to enter its relevant setup screen.
Quick Link.Tap to quick link to a program.
Tap to create a new item.
Tap to set up Bluetooth, Scenarios, view Call Filter status, etc.
For example, tap
scenario.
2-2
Scenarios to set up the suitable mode for each
The following table lists the icons that you may see on the Navigation
Bar or the Command Bar.Kindly refer to the“Meaning” column for
explanation or tap on the icon to access the instant message.
Icon
(Located on the Navigation Bar at the top of the screen)
Speaker is on
Speaker is off
Main battery is charging.
Main battery power is low.
Main battery power is very low.
Main battery is fully charged.
Meaning
Icon
Backup battery power is low.
Notify you that you have one or more MSN instant messages.
Notify you that you have one or more e-mails, text messages or
voice mails.
If there is not enough space on the screen to display all
notification icons, tap this icon to view all icons.
Active connection to computer
Active Sync is synchronizing
Phone is powered off
Signal strength indicator for phone function
GPRS not in use
GPRS in use
GPRS available
Meaning
(Located on the Command Bar at the bottom of the screen)
General Mode. Set the scenario suitable for each environment.
Meeting Mode. Set the scenario suitable for each environment.
Outdoor Mode. Set the scenario suitable for each environment.
Silent Mode. Set the scenario suitable for each environment.
Using the Pocket PC 2-3
Programs
You can switch from one program to another by selecting it from the
menu. (You can customize which programs you see on this menu. For
information, see “Adjusting Settings” section.) To access some programs,
you’ll need to tap
Icon Programs Description
Games Group Jawbreaker, Solitaire
Multimedia Group Camera, Image Maker, Image Wizard,
Phone Group Call Filter, MMS Composer, Send
Utilities Group Backup Utility, Configuration Wizard,
Voice Commander
Group
ActiveSync Synchronize information between your
Calendar Keep track of your appointments and
, Programs, and then the program name.
Multimedia Manager
SMS, SIM Manager, SIM Tool Kit,
Speed Dial, Wireless Modem
M-Desk
Voice Commander, Voice Commander
Setting
Pocket PC and desktop computer.
create meeting requests.
2-4
Contacts Keep track of your friends and
colleagues.
Notes Create handwritten or typed notes,
drawings, and recordings.
Tasks Keep track of your tasks.
Messaging Send and receive e-mail messages.
Icon Programs Description
Pocket Internet ExplorerBrowse Web and WAP sites, and
download new programs and files from
the Internet.
MSN Messenger Send and receive instant messages with
your MSN Messenger contacts.
Pocket Word Create new documents or view and edit
Word documents created on your
desktop computer.
Pocket Excel Create new workbooks or view and
edit Excel workbooks created on your
desktop computer.
Calculator Performs basic calculations.
Pictures Manages and uses image files.
Windows Media Player Plays movies or sound files.
File Explorer Manages files or folders.
You can also switch to some programs by pressing a program button.
Your Pocket PC has one or more program buttons located on the front or side
of the Pocket PC. The icons on the buttons identify the programs they switch
to. For more information, refer to “Redefine Hot Keys” section.
Using the Pocket PC 2-5
Navigation Bar and Command Bar
The navigation bar is located at the top of the screen. It displays the
active program and current time, and allows you to switch to programs and
close screens.
Use the command bar at the bottom of the screen to perform tasks in
programs. The command bar includes menu names, buttons, and the Input
Panel button. To create a new item in the current program, tap New. To see
the name of a button, tap and hold the stylus on the button. Drag the stylus
off the button so that the command is not carried out.
Tap to change volume or mute the
Pocket PC.
Tap to select a program.
Tap to quickly select a program
you have recently used.
Tap to see additional programs.
Tap to customize the Pocket PC.
Input panel button.
New button.
Menu names.
Buttons.
2-6
Loading...
+ 180 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.