ETC Source Four PAR-EA-B Specifications

®

Source Four® PAR EAETC

PAR Series

S P E C I F I C A T I O N S

PHYSICAL

• Rugged die-cast aluminum construction

• Tool free access to the reflector and lens

• High-impact, thermally insulated knobs

• Sealed reflector housing

• Reflector temperature control through integral heat sink fins

• Gel frame holders with two accessory slots

• Top-mounted, gel-frame retainer

• Steel yoke with two mounting positions

• Positive locking yoke clutch

• UL and cUL Listed

ELECTRICAL

• 115-240V, 50/60Hz

• High-temperature three-conductor 36” leads in a glass fiber
outer sleeve

• Supports ETC Dimmer Doubling

LAMP

• Compact tungsten filament contained in a krypton/xenon­filled quartz envelope (see table for suitable lamp types)

• 750W maximum

• Patented filament geometry makes for extremely efficient
light collection and transmission

• Integral die-cast aluminum heat sink lamp base

LENSES

• Four heat resistant, molded borosilicate glass lenses supplied
with each unit: Very Narrow Spot (VNSP), Narrow Spot (NSP),
Medium Flood (MFL) and Wide Flood (WFL).

• Round beam for VNSP and NSP, oblong beam shape for MFL
and WFL

• Optional Extra Wide Flood lens (XWFL) also available

• Tool free lens changing

• Thermally insulated lens ring

™

technology

S P E C I F I C A T I O N S

OPTICAL

• Modified parabolic and multifaceted reflector

• Computer designed reflector facets molded directly into heat
sink casting, finished with an enhanced aluminum deposition
process, and polished for maximum reflectance

• Metal Cold Mirror (MCM) also available

O R D E R I N G I N F O R M A T I O N

Source Four PAR EA

MODEL DESCRIPTION

PAR-EA Source Four PAR Enhanced Aluminum (Black)

PAR-EA-1 Source Four PAR Enhanced Aluminum (White)

ETC Source Four PAR EA are supplied with 4 lens set: VNSP, NSP, MFL, WFL; color
frame and 3’ (96cm) lead as standard

Connector Designation

Use Suffixes below to specify Factory–Fitted Connector type

MODEL DESCRIPTION

-A Parallel-blade U-ground connector

-B Two-pin and ground, 20 amp connector

-C Grounded, 20 amp, twistlock connector

-M Dimmer Doubling Connector (NEMA L515P)

See back page for Source Four PAR Accessories

1 of 6

ETC

®

Source Four® PAR EA

PAR Series

P H O T O M E T R I C S

Photometric data below is measured with an HPL 750W/115V 300 hr lamp. To convert data when using any other HPL lamp, use the lumen or
candela multiplying factors (Lm MF or Cd MF) for that specific lamp. These multiplying factors are listed in the Lamps table in this datasheet. For
lumen data, multiply by the Lm MF. For candela or footcandle data, multiply by the Cd MF.

Source Four PAR EA with VNSP lens

Degree Candela

VNSP

For Field diameter at any distance, multiply distance by 0.29

For Beam diameter at any distance, multiply distance by 0.16

Throw Distance (d)

Field Diameter

Illuminance (fc)

Illuminance (lux)

382,145 9,640 5,395 44% 12.9

Field

Lumens

9˚ 16˚

30’

9.1m

8.6’

2.6m

425 153 78 53

4,570 1,645 839 569

Beam

Lumens

50’

15.2m

14.4’

4.4m

Efficiency

Iso-Illuminance Diagram

(Flat Surface Distribution)

Y

70’

21.3m

20.2’

6.1m

Lumens

per watt

Field Angle

Beam Angle

25.9m

24.5’

7.5m

85’

Source Four PAR EA with NSP lens

Degree Candela

NSP

For Field diameter at any distance, multiply distance by 0.30

For Beam diameter at any distance, multiply distance by 0.16

Throw Distance (d)

Field Diameter

Illuminance (fc)

Illuminance (lux)

336,740 9,504 5,280 43.4% 12.7

Field

Lumens

9˚ 17˚

25’

7.6m

7.4’

2.3m

539 166 80 53

5,799 1,790 858 566

Beam

Lumens

45’

13.7m

13.3’

4.1m

Efficiency

Iso-Illuminance Diagram

(Flat Surface Distribution)

Y

65’

19.8m

19.3’

5.9m

Lumens

per watt

Field Angle

Beam Angle

24.4m

23.7’

7.2m

80’

Candela

10%

X

50%

Candela Plot

400000

350000

300000

250000

200000

Candela

150000

100000

50000

Degrees

2 of 6

X

Candela Plot

0

-12 -9 -6 -3 0 3 6 9 12

Degrees

10%

50%

X

Y

ETC

®

Source Four® PAR EA

Metric Conversions: For Meters multiply feet by .3048

For Lux multiply footcandles by 10.76

P H O T O M E T R I C S

Source Four PAR EA with MFL lens

Degree Candela

MFL

For Field diameter at any distance, multiply distance by 0.41V / .56H

For Beam diameter at any distance, multiply distance by 0.22V / .32H

135,225 9,890 5,580 45.2% 13.2

Throw Distance
(d)

Field Diameter

Field

Lumens

13˚ Vertical
18˚ Horizontal

15’

4.6m

6.2’/8.4’

1.9m/2.6m

Illuminance (fc) 601 216 85 54

Illuminance (lux) 6,467 2,329 910 582

Beam

Lumens

25’

7.6m

10.3’/14.0’

3.2m/4.3m

Efficiency

23˚ Vertical
31˚ Horizontal

40’

12.2m

16.6’/22.5’

5.0m/6.9m

Lumens

per watt

Field Angle

Beam Angle

15.2m

20.7’/28.1’

6.3m/8.6m

50’

PAR Series

Source Four PAR EA with WFL lens

Degree Candela

WFL

For Field diameter at any distance, multiply distance by 0.66V / 0.95H

For Beam diameter at any distance, multiply distance by 0.35V / 0.55H

47,270 9,220 5,240 42.1% 12.3

Throw Distance
(d)

Field Diameter

Field

Lumens

20˚ Vertical
31˚ Horizontal

8.0’

2.4m

5.3’/7.6’

1.6m/2.3m

Illuminance (fc) 739 185 82 53

Illuminance (lux) 7,950 1,987 883 565

Beam

Lumens

16.0’

4.9m

10.6’/15.3’

3.2m/4.7m

Efficiency

37˚ Vertical
51˚ Horizontal

24.0’

7.3m

15.8’/22.9’

4.8m/7.0m

Lumens

per watt

Field Angle

Beam Angle

19.8’/28.6’

6.0m/8.7m

30.0’

9.1m

Candela

Iso-Illuminance Diagram

(Flat Surface Distribution)

Y

X

Candela Plot

10%

50%

Iso-Illuminance Diagram

(Flat Surface Distribution)

Y

10%

X

50%

Candela Plot

Candela

Degrees

Complete IES photometry data files (LM-63-02 format) may be downloaded from the ETC website.

Go to http://www.etcconnect.com/downloads.asp

3 of 6

Degrees

®

Source Four® PAR EAETC

PAR Series

L A M P S

To determine Candela (Cd) or Lumens (Lm) for any other HPL lamp, multiply the Candela or Lumen value by the appropriate multiplying factor
(CdMF or LmMF) shown for that lamp in the table below.

ETC

Part #

Source Four PAR EA is rated for 750W maximum.

*77 Volt HPL lamps are for use with ETC Dimmer Doubling technlology only.

**Photometric data was prepared using a production fixture and the Prometric CCD measurement system. Fixture adjusted for cosine distribution and tested with calibrated
lamp at rated voltage. All data normalized to nominal lamp lumens in accordance with IES LM-73-04. Testing performed at ETC West, Hollywood, CA. All other multiplying
factors extrapolated from primary test data.

For links to photometry file downloads (IES LM-63-02 format) go to www.etcconnect.com

HPL Specified Tolerances: Watts +/- 5%, Lumens +/-7%, Average life +/-10%, Color Temperature +/- 50K

Lamp Code

RT116 HPL 750/115** 750 115 21,900 3,250 300 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00

RT196 HPL 750/115X 750 115 16,400 3,050 1,500 .64 .74 .64 .74 .64 .74 .64 .74

RT113 HPL 575/115** 575 115 16,520 3,250 300 .92 .75 .88 .75 .80 .77 .75 .77

RT114 HPL 575/115X 575 115 12,360 3,050 2,000 .56 .56 .56 .56 .56 .56 .56 .56

RT142 HPL 375/115 375 115 10,540 3,250 300 .78 .48 .74 .48 .67 .49 .63 .49

RT143 HPL 375/115X 375 115 8,500 3,050 1,000 .54 .36 .51 .36 .46 .37 .44 .37

N/A HPL 750/120 750 120 21,900 3,250 300 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00

N/A HPL 750/120X 750 120 16,400 3,050 1,500 .64 .74 .64 .74 .64 .74 .64 .74

RT115 HPL 575/120 575 120 16,520 3,250 300 .92 .75 .88 .75 .80 .77 .75 .77

RT171 HPL 575/120X 575 120 12,360 3,050 2,000 .56 .56 .56 .56 .56 .56 .56 .56

RT112 HPL 550/77* 550 77 16,170 3,250 300 .94 .74 .90 .74 .81 .75 .77 .75

RT117 HPL 550/77X* 550 77 12,160 3,050 2,000 .59 .56 .59 .56 .59 .56 .59 .56

RT160 HPL 750/230** 750 230 19,750 3,200 300 .61 .82 .64 .80 .74 .79 .76 .79

N/A HPL 750/230X 750 230 15,600 3,050 1,500 .38 .64 .40 .63 .46 .63 .47 .62

RT129 HPL 575/230** 575 230 14,900 3,200 400 .53 .61 .54 .60 .59 .61 .58 .60

RT138 HPL 575/230X 575 230 11,780 3,050 1,500 .37 .49 .38 .48 .45 .48 .46 .47

RT154 HPL 375/230X 375 230 7,800 3,050 1,000 .29 .32 .30 .31 .33 .32 .32 .31

N/A HPL 750/240 750 240 19,750 3,200 300 .61 .82 .64 .80 .74 .79 .76 .79

N/A HPL 750/240X 750 240 15,600 3,050 1,500 .38 .64 .40 .63 .46 .63 .47 .62

RT130 HPL 575/240 575 240 14,900 3,200 400 .51 .61 .52 .60 .56 .61 .55 .60

RT139 HPL 575/240X 575 240 11,780 3,050 1,500 .34 .49 .36 .48 .42 .48 .43 .47

RT155 HPL 375/240X 375 240 7,800 3,050 1,000 .29 .32 .30 .31 .33 .32 .32 .31

Watts Volts

Initial

Lumens

Color

Temp.

Avg.

Rated

K

Life

VNSP

Cd MF

VNSP

Lm MF

NSP

Cd MF

NSP

Lm MF

MFL

Cd MF

MFL

Lm MF

WFL

Cd MF

WFL

Lm MF

“N/A” lamps are not available for purchase from ETC. Contact your Dealer for purchase.

4 of 6

®

Source Four® PAR EAETC

PAR Series

P H Y S I C A L

6.7”

170mm

5.8”

147mm

274mm

10.8”

O R D E R I N G I N F O R M A T I O N

Continued from front page...

Source Four PAR Accessories

MODEL DESCRIPTION

407CF Color frame (7.5”) (included)

400SC Safety Cable

400CC C-Clamp

400–VNSP Very Narrow Spot lens

400–NSP Narrow Spot lens

400–MFL Medium Flood lens

400–WFL Wide Flood lens

400–LS4 Set of four Source Four PAR lenses (VNSP, NSP,

MFL, WFL)

400-XWFL Extra Wide Flood lens (optional - not included

with fixtures)

400PTH3 Top hat, 3”

400PTH6 Top hat, 6”

400PHH Half hat

400XBTH Cross baffle top hat

400PGE3 Gel extender, 3”

400PGE6 Gel extender, 6”

400BD Barn door

400L Egg crate louver

400WB Weighted base

Note: For colors other than black and white, please call ETC.

15.9”

404mm

8.3”

211mm

10.3”

262mm

Source Four PAR Weights

*

MODEL WEIGHT SHIPPING WEIGHT

lbs kgs lbs kgs

S4PAR-EA 7.5 3.4 12.8 5.8

*Add 2.3 lbs for C-clamp

Source Four products are protected by one or more of the following
patents:

U.S. USRE36,3316, US5,345,371, US6,092,914 and

US5,775,799

U.K. GB0592589, GB0673488, 99930527.9*

Germany DE0592589, GB0673488, 99930527.9*

Japan JP2,501,772

* European patent application number

5 of 6

®

Source Four® PAR EAETC

PAR Series

Corporate Headquarters • 3031 Pleasant View Rd, PO Box 620979, Middleton WI 53562 0979 USA • Tel [phone] • Fax [phone]
London, UK • Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK • Tel [phone] • Fax [phone]
Rome, IT • Via Pieve Torina, 48, 00156 Rome, Italy •Tel [phone] • Fax [phone]
Holzkirchen, DE • Ohmstrasse 3, 83607 Holzkirchen, Germany • Tel [phone] • Fax [phone]
Hong Kong • Room 1801, 18/F, Tower 1 Phase 1, Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong • Tel [phone] • Fax [phone]
Web • www.etcconnect.com • Copyright©2010 ETC. All Rights Reserved. All product information and specifications subject to change. 7061L1004 Rev. F Printed in USA 12/10

6 of 6