ETC SELRVN-D22, SELD22L-I, SELD22CF Datasheet

ETC

®

D22

Desire® Series

GENERAL INFORMATION

ETC’s Selador Desire D22 luminaire puts the x7 Color System™ into
a compact, round washlight. Highly efficient primary lenses and
careful color choices make the D22 fixture ideal for stage, studio,
architecture and anywhere vibrant color and high intensity are
requirements. The Selador
range of spectrally-balanced saturated and tinted color choices
available, while the static-white options provide an impressive
punch. D22’s rugged die-cast enclosure, noiseless fan-free operation,
multiple lens options, convenient size and advanced user interface
make it an ideal addition to the Desire family of LED luminaires.

D22 LED ARRAY

D22 fixtures are available with any one of the following arrays (not
interchangeable) to best suit the intended application.

• D22 Lustr+
intensity white LEDs to create an ideal wash fixture for full-
range color

• D22 Studio Daylight: Contains twenty-two 5600K LEDs for
high-intensity, non-variable cool-white output

• D22 Studio Tungsten: Contains twenty-two 3000K LEDs for
high-intensity, non-variable warm-white output

• D22 Studio HD: Combines warm white and cool white LEDs
for variable-color-temperature mixing. Added to this are
carefully chosen colors from the Selador x7 Color System to
fill in the white LED spectral gaps, providing the richest
variable-white light possible in an LED fixture.

®

x7 Color System produces the widest

™

: Optimized array with six colors plus, high-

ORDERING INFORMATION

Selador D22

MODEL DESCRIPTION

SELD22L D22 Lustr+ wash fixture

SELD22D D22 Studio Daylight wash fixture

SELD22T D22 Studio Tungsten wash fixture

SELD22H D22 Studio HD wash fixture

Note: D22 luminaires ship with hanging yoke. See page 2 for connector options.

C-clamps are not included.

D22 MOUNTING CONFIGURATIONS

D22 fixtures are available in three different mounting options to fit
any installation:

• D22 Portable: Standard yoke-mount hardware; power lead
with Edison connector and DMX in/thru connectors

• D22 Install Canopy: Standard yoke-mount and canopy
hardware; power lead with bare ends; and a permanent,
single DMX in/thru cable

• D22 Track-Yoke: Track adapter and a single, permanent cable
for both power and DMX in

1 of 9

ETC

®

D22

Desire® Series

SPECIFICATIONS

GENERAL

• 22-LED color-mixing wash fixture (Lustr+

• 22-LED variable white-light fixture (Studio HD)

• 22-LED static cool- or warm-white wash fixture (Studio
Tungsten and Studio Daylight)

• ETL listed general purpose lighting

• IP20-rated for indoor use

• DMX in/thru for easy setup (no DMX thru on D22 Track)

• User-friendly control interface with multiple modes and
fixture settings

• Permanent power input cable connected

PHYSICAL

• Rugged die-cast all-metal housing

• Easy access slots for secondary lenses and 5.5” accessories

• Available in black (standard), white, silver (optional) or
custom colors (contact factory)

• Hanging yoke standard

• DMX512 in/thru via five-pin XLR connectors (D22
Portable only)

• IP20 for Portable and Canopy versions

• IP40 for Track version

ELECTRICAL

• 100VAC to 240VAC 50/60Hz universal power input

• 20 fixtures total per circuit when used with R20
Relay Module or Unison Echo Relay Panel. Consult breaker
trip curves when used with other equipment

• Requires power from a non-dim source

• Inrush

- 120V: 17A

- 240V: 25A

LED*

• 50,000-hour LED life (50,000 hours at 70% intensity)

• 22 Luxeon

*See additional LED notes on page three

COLOR (LUSTR+ AND STUDIO HD ONLY)

• Exclusive x7 Color System

• Unique mix of x7 colors and warm and cool LEDs (Studio HD)

• Beautifully illuminates skin tones and other objects for
natural appearance and high color rendering

• Broad-spectrum color interacts seamlessly with
conventional sources

• Exclusive, optional red-shift option emulates tungsten
dimming performance

OPTICAL

• Primary field angle of 21°

• Secondary lenses available for multiple beam spread options

• Refer to accessories charts for lenses available

CONTROL

• Multiple control options, including RGB, strobe, and console­ free Master/Slave mode

• See DMX Control Table for additional information

• 15-bit virtual dimming engine provides smooth, high-quality
theatrical fades, and minimizes color shift during dimming

• RDM functionality for address and setting changes

®

Rebel LED emitters

™

seven-color LED array (Lustr+)

™

)

SPECIFICATIONS

THERMAL

• Ambient operating temperature of 32°F to 104°F
(0°C to 40°C)

• Active electronic thermal management for
droop-free operation

• Noiseless, fan-free convection cooling for acoustically
sensitive installations

• Fixture is designed for continuous operation up to 104°F

(40°C) ambient temperature and requires free flow of air
around fixture housing

ADDITIONAL ORDERING INFORMATION

Connector Options

Use information below to order input with factory-fitted connectors

MODEL DESCRIPTION

n/a Portable with Edison connector

-I Install Canopy Mounting

-T Track Mounting

Fixture Accessories

MODEL DESCRIPTION

SELD22BD Barn door (Use only as a flexible top hat to diminish

aperture glare. Not for beam shaping.)

SELD22CF 5.5” Color Frame (use for round and oblong lenses)

SELD22ECL Egg Crate Louver

SELD22HS Half-Shield

SELD22FSY Yoke with floor stand attachment

400CC C-Clamp (does not ship with fixture)

400SC Safety Cable (32”)

Note: All model numbers above are for black accessories. Add -1 for white or -5 for silver. Custom
colors are available upon request.

2 of 9

ETC

®

D22

Desire® Series

ADDITIONAL ORDERING INFORMATION

Secondary Lens Options

MODEL DESCRIPTION: The following lenses are cut

for D22 fixtures and create round, linear or
oblong field patterns as described below. These
lenses are not sized for use in Selador

™

(Vivid-R

Narrow Linear
Field

SELLVN-D22

SELLN-D22

SELLM-D22 Medium lens (narrow linear field)

SELLW-D22

SELLXW-D22

Round Field

SELRVN-D22 Very Narrow lens (round field)

SELRN-D22 Narrow lens (round field)

SELRM-D22 Medium lens (round field)

SELRW-D22 Wide lens (round field)

SELRXW-D22 Extra Wide lens (round field)

Oblong Field

SELON-D22 Narrow lens (oblong field)

SELOM-D22 Medium lens (oblong field)

SELOW-D22 Wide lens (oblong field)

Note: This is the same material as Selador
lenses

Very Narrow lens (narrow linear
field)

Narrow lens (narrow linear field)

Wide lens (narrow linear field)

Extra Wide lens (narrow linear
field)

, Lustr®, Paletta™, etc.) fixtures.

®

Classic

Classic

Linear
lenses
may be
combined
to create
desired field
size, i.e.
40° X 60°

NOTES ABOUT LED LUMINAIRES

All LED sources experience light-output reduction and some color
shift over time. LED output will vary with thermal conditions, which
can be affected by ambient temperatures and orientation. See the
D40 Ambient Temperature and Power Budgeting Guide for more
details. Based on the LED manufacturer’s B50 L70 specification, a
Selador luminaire will achieve ~70% of its initial output after 50,000
hours of typical usage. In individual situations, LEDs will be used
for different durations and at different levels. This can eventually
lead to minor alterations in color performance, necessitating slight
adjustment to presets, cues or programs.

CRI AND CQS RATINGS

Desire fixtures were evaluated for CRI and CQS performance using
measured output spectrum and optimized mix solutions for the best
spectral match to black body sources at 3200K and 5600K.

Fixture CRI CQS Color

Fidelity

D22 Lustr+ at 3200K 86 88 88 0.000

D22 Lustr+ at 5600K 93 92 90 0.000

The D22 luminaire provides excellent color rendering to the eye,
particularly at higher color-temperature settings such as 5600K. A
Duv rating of 0.000 indicates that the color mix used is exactly on
the black body line, with no green or magenta tint.

Duv

Desire lenses compared to Source Four PAR EA

Typical Lens-Field Profiles

Round OblongNarrow Linear

Power Consumption at Full Intensity

MODEL VOLTAGE

(V)

D22 120/240 0.47 56.5

CURRENT

(A)

WATTS

3 of 9

ETC

®

D22

Desire® Series

LENS INFORMATION

Desire diffusion angle measurements

NOMINAL

No Lens

D22

LUSTR+ 18 22 27 42 69 104 20 x 37 25 x 60 30 x 82

VIVID 18 22 27 42 69 104 20 x 37 25 x 60 30 x 82

STUDIO HD 18 23 28 42 69 104 21 x 29 25 x 61 30 x 82

STUDIO D 22 25 30 43 70 105 24 x 39 28 x 62 32 x 80

STUDIO T 23 25 30 43 70 105 24 x 39 28 x 62 32 x 80

Values in black refer to old lens discriptions.

Very

Narrow

25° 35° 45° 75° N/A 20° x 40° 30° x 70° 35° x 80°

Narrow Medium Wide Extra Wide

Narrow

Oval

Medium

Oval

Wide Oval

4 of 9

ETC

®

D22

™

Desire™ Series

CONTROL OPTIONS

User settings on D22 fixtures allow multiple operational modes and
settings for either console operation via DMX protocol or stand-alone
operation. The expanded LCD display provides easy navigation to all
possible settings and options. Some of them are:

• Multiple DMX choices, ranging from a simple RGB
profile – which effectively controls all seven LED colors via
three channels – to nine-channel ‘direct’ color and
intensity control

• Multiple dimming curve options

• Preset colors and sequences for stand-alone (no console
required) operation

• White-point selection: White-light and color behavior based
on a specific-color-temperature white light, i.e. 3200K,
5600K, etc.

• Loss of data behavior options: Instant off, hold last look for
two minutes, etc.

• Output modes: Three output options that offer the user a
choice between maximum output and maximum consistency

See the user manual for a complete explanation of all of the control
settings and options for the D22.

Quick Setups

To assist in managing the numerous control and fixture behavior choices, five
combinations of operational settings are available to quickly get started. These
settings are specifically created for different applications and are easily accessible at
the fixture display. Each setting can then be modified as required to take advantage
of all of the possible control features.

Setting
Title

General Direct Factory default:

Stage HSI

XT Arch HSI Exterior architectural lighting:

High
Impact

Studio Studio Studio factory default:

*See user manual for complete list of features for each Quick Setup

Profile Description Typical Features*

For general-purpose
use, including interior
architectural applications

Plus 7
Enabled

RGB Event lighting:

Theatrical lighting:
Duplicates the color and
dimming behavior of
tungsten stage lighting
fixtures.

Provides a high degree
of color consistency in
high ambient-temperature
environments.

Enables quickest response,
simple RGB control and
strobe channel for maximum
effect usage

Enables three-parameter
control of white light

(intensity, white point, and
tint) via DMX from a console

or from the fixture display –
without a console

• Standard dimming curve

• Regulated output for
color consistency

• Incandescent dimming
curve

• Regulated output for
color consistency

• 3250K white-point
setting

• Standard dimming curve

• Protected output

• 3200K white-point
setting

• Quick dimming curve

• Boost mode for
maximum intensity

• 5600K white-point
setting

• Linear dimming curve

• Regulated output mode
for color consistency

CONTROL OPTIONS

DMX Input Channel Profiles

DMX
Profile

Direct 9 1 – Red

HSI 5 1 – Hue (coarse)

HSIC 6 1 – Hue (coarse)

RGB 5

Studio 3 1 – Intensity

Additional profile options

Plus 7 Seven additional color-control channels are available

Strobe Variable strobe control: 0% is no strobe. The fixture

DMX

Channels

(Ch. 4

not used)

Channel

Assignments

2 – Orange
(white for Lustr+)
3 – Amber
4 – Green
5 – Cyan
6 – Blue
7 – Indigo
8 – Intensity
9 – Strobe

2 – Hue (fine)
3 – Saturation
4 – Intensity
5 – Strobe

2 – Hue (fine)
3 – Saturation
4 – Intensity
5 – Strobe
6 – Color Point
(CCT)

1 – Red
2 – Green
3 – Blue
4 – n/a
5 - Strobe

2 – Color Point
(CCT)
3 – Tint

in RGB, HSI, HSIC, and Studio profile settings. For
example, HSI with ‘Plus 7’ enabled becomes a
14-channel profile:

1 – Hue (coarse)
2 – Hue (fine)
3 – Saturation
4 – Intensity
5 – Strobe
6 – n/a
7 – Plus 7
Control on/off
8 – Red
9 – Orange
(white for Lustr+)
10 – Amber
11 – Green
12 – Cyan
13 – Blue
14 – Indigo

output will strobe more rapidly as the strobe channel
value approaches 100%.

Direct control of each individual
color with a separate master­intensity channel. Color
calibration of LEDs is not active
in this mode. The nine-channel
profile will produce the highest­quality color crossfades.

High-resolution hue (two
channels), saturation, and
intensity control. HSI mode
will produce arbitrary color
crossfades around the color
space.

High-resolution hue, saturation
and intensity control as above,
with the addition of a color­point channel to adjust the color
temperature of the fixture in
both white light and color. Color
crossfade performance is the
same as HSI.

Effectively addresses all seven
colors via three channels of
control. RGB profile will produce
medium-quality color crossfades

Controls fixture as a white-light
unit. If for example, no DMX
console input is present, the
fixture can be adjusted for these
three parameters on the U/I at
the back of the unit.

The desired color and intensity
is achieved by using the HSI or
RGB channels.

Placing channel seven at a value
over 51% gives the fixture a
14-channel profile.

Channels 8-14 represent the
native colors of the fixture and
allow the operator to adjust
individual color channels to fine
tune the color output.

Notes

5 of 9

ETC

®

CONTROL OPTIONS

Studio Daylight and Studio Tungsten (only)

D22

Desire® Series

Quick Set-Ups

Setting Title Profile Description Typical Features

Studio Studio Enables control of

intensity from luminaire
U/I; no console required

Single
Channel

Stage Direct Matches conventional

Direct For general purpose

architectural use

luminaire performance

• Linear dimming curve

• Regulated output for
intensity stability

• Standard dimming
curve

• Regulated output for
color consistency

• Incandescent dimming
curve

• Regulated output

DMX Input Channel Profiles

DMX
Profile

Studio 3 1 – Intensity

Direct 3 1 – Intensity

DMX

Channels

Channel Assignments Notes

2 – Strobe
3 – Fan Control
(D60 only)

2 – Strobe
3 – Fan Control
(D60 only)

Control of parameters is also
enabled from the luminaire’s user
interface. No console required.

6 of 9

ETC

Field Angle

Beam Angle

Field Angle

®

PHOTOMETRICS

D22 Lustr+

Mode Degree Candela Field

Boost - Cold

Regulated

Metric conversions: For meters, multiply feet by 0.3048

™

Lumens

21˚

21

49,151 1,681 707 32

43,669 1,499 629 31

˚

For lux, multiply foot candles by 10.76

Beam

Lumens

Lumens

Per Watt

Cosine Candela Plot

50000

40000

30000

Candela

20000

10000

0

-15-10 -5 0510 15

Degrees

D22

Desire® Series

X

Y

10˚ 21˚

Beam Angle

Throw Distance (d) 10’

3.0m

Field Diameter 3.7’

1.1m

15’

4.6m

5.6’

1.7m

20’

6.1m

7.4’

2.3m

30’

9.1m

11.1’

3.4m

209

63.7m

–

Illuminance (fc) 437 194 109 48.6

Illuminance (lux) 4,704 2,091 1,176 523

To determine center beam illumination in footcandles at any throw distance, divide
candela by the throw distance squared

For field diameter at any distance, multiply distance by 0.301
For beam diameter at any distance, multiply by 0.145

D22 Studio Daylight

Mode Degree Candela Field

Lumens

Boost - Cold

Regulated

22˚

22

49,808 2,722 1,099 51

46,151 2,533 1,031 50

˚

Metric Conversions: For meters, multiply feet by .3048

For lux, multiply foot candles by 10.76

12˚ 22˚

Beam

Lumens

Lumens

Per Watt

Iso-Illuminance Diagram

(Flat Surface Distribution)

Cosine Candela Plot

50000

40000

30000

Candela

20000

10000

0

-15-10 -5 0510 15

Degrees

Iso-Illuminance Diagram

(Flat Surface Distribution)

10%

50%

% illuminance
foot candle
or lux

X

Y

Throw Distance (d) 10’

3.0m

Field Diameter 4.8’

1.5m

15’

4.6m

7.3’

2.2m

20’

6.1m

9.7’

2.9m

30’

9.1m

14.5’

4.4m

214.8’

65.5m

–

Illuminance (fc) 462 205 115 51.3

Illuminance (lux) 4,968 2,208 1,242 552

To determine center beam illumination in footcandles at any throw distance, divide
candela by the throw distance squared

For field diameter at any distance, multiply distance by 0.390
For beam diameter at any distance, multiply by 0.198

10%

50%

% illuminance
foot candle
or lux

7 of 9

ETC

Field Angle

Field Angle

®

PHOTOMETRICS

D22

Desire® Series

D22 Tungsten

Mode Degree Candela Field

Lumens

Boost - Cold

Regulated

24˚

24

41,656 2,210 1,031 41

39,502 2,096 978 41

˚

Metric conversions: For meters, multiply feet by 0.3048

For lux, multiply foot candles by 10.76

13˚ 24˚

Throw Distance (d) 10’

3.0m

Field Diameter 4.5’

1.4m

15’

4.6m

6.8’

2.1m

Illuminance (fc) 395 176 99 43.9

Illuminance (lux) 4,252 1,890 1,063 472

To determine center beam illumination in footcandles at any throw distance, divide
candela by the throw distance squared

For field diameter at any distance, multiply distance by 0.414
For beam diameter at any distance, multiply by 0.189

20’

6.1m

9.0’

2.7m

Beam

Lumens

30’

9.1m

13.5’

4.1m

Lumens

Per Watt

Beam Angle

198.8

60.6m

–

Cosine Candela Plot

40000

30000

20000

Candela

10000

0

-15-10 -5 0510 15

Degrees

Iso-Illuminance Diagram

(Flat Surface Distribution)

X

Y

50%

% illuminance
foot candle
or lux

10%

D22 Studio HD

Mode Degree Candela Field

Lumens

Boost - Cold

Regulated

21˚

21

44,555 1,731 715 33

32,166 1,247 507 31

˚

Metric conversions: For meters, multiply feet by 0.3048

For lux, multiply foot candles by 10.76

10˚ 21˚

Throw Distance (d) 10’

3.0m

Field Diameter 4.0’

1.2m

15’

4.6m

6.0’

1.8m

Illuminance (fc) 322 143 80 35.7

Illuminance (lux) 3,462 1,539 866 385

To determine center beam illumination in footcandles at any throw distance, divide
candela by the throw distance squared

For field diameter at any distance, multiply distance by 0.414
For beam diameter at any distance, multiply by 0.189

20’

6.1m

8.0’

2.4m

Beam

Lumens

30’

9.1m

12.0’

3.7m

Lumens

Per Watt

Beam Angle

179.3’

54.7m

–

Cosine Candela Plot

40000

30000

20000

Candela

10000

0

-15-10 -5 0510 15

Degrees

Iso-Illuminance Diagram

(Flat Surface Distribution)

X

Y

50%

% illuminance
foot candle
or lux

10%

8 of 9

ETC

138mm

5.45”

160mm

6.30”

208mm

8.17”

237mm

9.35”

264mm

10.39”

237mm

9.35”

196mm

7.71”

167mm

6.56”

128mm

5.04”

83mm

3.27”

138mm

5.45”

160mm

6.30”

83mm

3.27”

208mm

8.17”

187mm

7.35”
264mm

10.39”

155mm

6.10”

196mm

7.71”

167mm

6.56”

128mm

5.04”

138mm

5.45”

160mm

6.30”

208mm

8.17”

216mm

8.52”

264mm

10.39”

155mm

6.10”

196mm

7.71”

167mm

6.56”

128mm

5.04”

83mm

3.27”

®

PHYSICAL

Selador D22 Weights and Dimensions

WEIGHT* SHIPPING WEIGHT

lbs kgs lbs kgs

6.9 3.13 8.5 3.86

* Does not include mounting hardware

D22

Desire® Series

CANOPY

PORTABLE

TRACK

9 of 9

Corporate Headquarters • 3031 Pleasant View Rd, PO Box 620979, Middleton WI 53562 0979 USA • Tel [phone] • Fax [phone]
London, UK • Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK • Tel [phone] • Fax [phone]
Rome, IT • Via Pieve Torina, 48, 00156 Rome, Italy •Tel [phone] • Fax [phone]
Holzkirchen, DE • Ohmstrasse 3, 83607 Holzkirchen, Germany • Tel [phone] • Fax [phone]
Hong Kong • Room 1801, 18/F, Tower 1 Phase 1, Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong • Tel [phone] • Fax [phone]
Web • www.etcconnect.com • Copyright©2015 ETC. All Rights Reserved. All product information and specifications subject to change. 7411L1002 Rev. F USA 10/15

This product is protected by one or more of the following U.S. Patents: 6,016,038, 6,150,774, 6,788,011, 6,806,659, 6,683,423 and 7,023,543