ETC Selador Vivid-R 11 Specifications

ETC

G E N E R A L I N F O R M A T I O N

The Selador Series Vivid-R ﬁxture replaces Vivid as ETC’s strong color, long-throw LED ﬁxture. Highly efﬁcient primary lenses and careful color choices make Vivid-R brighter than the original Vivid while using less power. Vivid-R is ideal for stage, studio and anywhere strong color and high intensity lighting is required. It uses the x7

Color System

saturated and tinted colors available. Lighting designers will love the deep, pure colors teamed with high-power color punch. While maximized for high-brightness and deep color output, Vivid-R does not give up Selador Series’ unique ability to match warm, tungsten white light, vibrant daylight white, and soft, tinted gel colors.

Note: Vivid-R uses the 2.5W Rebel LED in place of the 3.5W K2 LED. The K2 LED is being discontinued in 2010. Color differences between Vivid and Vivid-R are slight, but will be noticeable if the ﬁxtures are used side-by-side.

APPLICATIONS

SUGGESTED APPLICATIONS

VIVID MODEL 11 21 42 63

Truss warmer

Front light

Side light

Key light

Fill light

Specials

Downlight

Backlight

Stagewash

Cyc light

™

to produce the widest range of spectrally balanced

• Theaters

• Themed Entertainment

• TV/Film Studios

• Churches

• Hotels

• Convention Centers

• Schools

•

• •

• • •

• •

• • •

• • • •

O R D E R I N G I N F O R M A T I O N

Selador Vivid-R

MODEL DESCRIPTION

SELVR11 Selador Vivid 11” (one cell)

SELVR21 Selador Vivid 21” (two cell)

SELVR42 Selador Vivid 42” (four cell)

SELVR63 Selador Vivid 63” (six cell)

Note: Units ship with mounting bolts, parallel-blade, U-ground (Edison) pigtail

(SPA-A) only. Power leads with alternate connectors and luminaire mounting hardware must be ordered separately. All secondary lenses must be ordered separately.

Connector Designation

Use information below to order 5’ leads with factory-ﬁtted connectors:

MODEL DESCRIPTION

SPA-X PowerCon

SPA-A PowerCon

SPA-B PowerCon

(stage pin) pigtail

SPA-C PowerCon

See page 2 for Selador Vivid-R Accessories.

1 of 6

™

to bare-end pigtail

™

to parallel-blade U-ground pigtail

™

to 20 amp two-pin and ground

™

to grounded 20 amp twistlock pigtail

ETC

S P E C I F I C A T I O N S

GENERAL

• 2.5W color-mixing LED ﬁxture

• Available in 11”, 21”, 42”, and 63” lengths

• ETL rated for indoor dry location use

PHYSICAL

• Rugged all-metal extruded housing

• Easy-access slots for secondary lenses

• Combine secondary lenses for desired horizontal and vertical beam spread

• Available in black (standard)

• Yoke (11” and 21” only), trunnion (ﬂoor stand), and hanging bracket mounting options

ELECTRICAL

• 100VAC to 240VAC 50/60 Hz universal power input

• Neutrik

• 5’ power lead (parallel-blade, U-ground) supplied (see page 1

• Requires power from non-dim source

LED*

• 50,000 hr. LED life

• 40 Luxeon

* See additional LED notes on page 3

COLOR

• Exclusive x7 Color System

• Vivid-R – optimized for strong saturated colors at maximum

• Interacts seamlessly with conventional sources

• Beautifully illuminates skin tones and other objects, for a

• Strong saturated colors with maximum punch

OPTICAL

• Native tight beam spread of approximately 19°

• Secondary lenses install in ﬁxture front to change distribution

• Use a combination of vertical and horizontal lenses to spread

• Lenses must be ordered separately

• Refer to accessories for lenses available

CONTROL

• DMX512 in and thru via 5-pin XLR connectors

• 8 channel control (7 color plus intensity)

• Intensity channel minimizes color shift during dimming

• 15-bit internal control control for smooth low-end dimming

• 21” ﬁxture provides 2 independently controlled cells

• 42” ﬁxture provides 4 independently controlled cells

• 63” ﬁxture provides 6 independently controlled cells

THERMAL

• Ambient operating temperature of 32°-104°F (0°- 40°C)

• Fixture case can become extremely hot (approx. 85°C) under

• Fixture is designed for continuous usage at 40°C ambient

• Fan speed thermostatically controlled for no-noise operation

PowerCon™ input connector

for input connector options)

Rebel 2.5W LED emitters per cell

™

7-color LED array

brightness

natural appearance with high color rendering

of light

light both directions

long-term, high-output, continuous usage

temperature. Requires free air ﬂow around ﬁxture

execpt as required for high heat or low air ﬂow situations

P O W E R C O N S U M P T I O N A T F U L L I N T E N S I T Y

VOLTAGE

MODEL

(V)

Vivid-R 11 (SELVR11) 120 / 240 1.05 / 0.60 125W / 144W

Vivid-R 21 (SELVR21) 120 / 240 2.10 / 1.20 250W / 288W

Vivid-R 42 (SELVR42) 120 / 240 3.60 / 2.00 500W / 576W

Vivid-R 63 (SELVR63) 120 / 240 6.30 / 3.60 750W / 864W

CURRENT

(A)

WATTS

A D D I T I O N A L O R D E R I N G I N F O R M A T I O N

Continued from front page...

Selador Vivid-R Accessories

MODEL DESCRIPTION

SELLH(degree) 20°, 30°, 40°, 60°, or 80° Secondary Lens –

Horizontal dispersion

SELLV(degree) 20°, 30°, 40°, 60°, or 80° Secondary Lens –

Vertical dispersion

SELYOKE11 Yoke Kit for 11” unit with C-clamp and hardware

SELYOKE21 Yoke Kit for 21” unit with C-clamp and hardware

SELDYOKE11 Double Yoke Kit for 11” unit with C-clamp and

hardware

SELDYOKE21 Double Yoke Kit for 21” unit with C-clamp and

hardware

SELTRU Trunnion / Floor Stand Kit (set of 2 with hardware)

MPARHBK Hanger Bracket Kit (set of 2 with C-clamps and

hardware)

400SC Safety cable (32-inch)

Secondary Lenses

Vertical Spread Horizontal Spread

2 of 6

+ 4 hidden pages