ETC RSN-DMX4-DIN Datasheet

Response Mk2 DIN Rail GatewaysETC

Gateway Series

GENERAL INFORMATION

ETC’s Response Mk2 Four-Port Gateway provides data distribution
using the quality and reliability of ETC’s network technology. Built for
Net3 using industry-standard sACN, DMX and RDM, the Response
Gateway unlocks the power of your networked system.

APPLICATIONS

• Road houses

• Touring

• University/professional theaters

• Convention halls

• Tech tables

• Stage manager panels

• System integration

FEATURES

• Distributes DMX and RDM data to any input/output device
over Ethernet

• Available in three different port counts

• Supports Net3 protocol powered by ACN

• Configurable DMX/RDM Output or Input

• Simple configuration and service of each port

• Onboard screen and buttons for labeling, status and
configuration

• Power, network and port direction status indicators

• Touch to Wake Sensor

• Power over Ethernet (PoE) or external DC power supply

• Configurable using Concert Software

ORDERING INFORMATION

DIN Rail Gateways

MODEL DESCRIPTION

RSN-DMX1-DIN Response MK2 1-port Gateway - DIN Rail

RSN-DMX2-DIN Response MK2 2-port Gateway - DIN Rail

RSN-DMX4-DIN Response MK2 4-port Gateway - DIN Rail

Mounting Accessories

MODEL DESCRIPTION

DIN-RM DIN rail Rack Mount Kit

DIN14 Small DIN rail Enclosure - Vertical

DIN14-H Small DIN rail Enclosure - Horizontal

DIN28 Large DIN rail Enclosure

1 of 4

Response Mk2 DIN Rail GatewaysETC

Gateway Series

SPECIFICATIONS

FUNCTIONAL

• Supports Net3/ACN (ANSI E1.31 and E1.17)

• Supports RDM (ANSI E1.20)

• Supports USITT DMX512-A (ANSI E1.11)

• USITT DMX512 and ANSI E1.11 DMX512-A compliant

• Flexible Output Patch allows a 512-address universe to begin
at any output address

• Advanced Input Patch

• Support for per-address- or per-universe-level priority

• Maximum delay time from input to output not greater than
one packet time

• Selectable DMX refresh rate with a maximum at least 40Hz

• Supports up to 256 total RDM devices

MECHANICAL

• Intuitive four-button interface

• Onboard display for identification, status and configuration

• Molded plastic enclosure

• Mounting complies with DIN43880 (35/7.5 rail)

• DIN installation enclosure available

• Network, power and data activity LED indicators

- Blue power indicator, green network activity indicator

- Bi-color DMX activity indicator

• RJ45 for connection to lighting network

• Reset button for hard reset or forced reboot

ENVIRONMENTAL

• Ambient operating temperature: 0° to 40°C (32° to 104°F)

• Operating humidity: 5% - 95% non-condensing

• Storage temperature: -40° to 70°C (-40° to 158°F)

ELECTRICAL

• Compliant with IEEE 802.3i for 10BASE-T, 802.3u for
100BASE-TX and 802.3af for Power over Ethernet

• 12-24VDC power input for use with non-PoE systems

• Maximum seven watt current draw

CONFIGURATION

• Local configuration options

• Remote configuration provided by Net3 Concert

- Supports up to 512 DMX addresses per port

- Supports up to 63,999 Streaming ACN universes

• DMX data input or output configurable by user

• Multiple sources may be combined to the network with each
source or address allowed an independent priority

• Individual port start address and offset

• User-configurable labeling

REGULATORY AND COMPLIANCE

• cETLus Listed

• CE compliant

• EAC certified

• RoHS compliant

• WEEE

ADDITIONAL INFORMATION

DMX512

Often shortened to DMX (Digital Multiplex), this communication
protocol is used mainly to control dimmers and multi-parameter
fixtures. A universe of DMX is defined as 512 channels. DMX sends
a nearly continuous stream of level information for each control
channel. It is a form of RS-485 digital serial communication.

RDM

Remote Device Management (ANSI E1.20) is a protocol enhancement
to DMX512 that allows low-speed bidirectional communication
between a system controller and attached RDM devices over a
standard DMX line. This protocol will allow remote configuration,
status monitoring, and management of devices.

sACN

Streaming ACN (ANSI E1.31), sends DMX-style control over TCP/
IP networks. It provides a fast and efficient mechanism to transport
the well-understood DMX protocol over Ethernet using an industry­standard protocol.

ACN

Architecture for Control Networks (ANSI E1.17) is a standard for
high-speed bidirectional communication over TCP/IP on Ethernet
network infrastructure. ACN is an open suite of protocols used
between network devices for the purposes of greater and more
adaptive control.

NET3

ETC’s enhanced implementation of the standard ACN Protocol Suite
(ANSI E1.17 and E1.31) including additional communication protocols
for specialized applications and support of legacy systems.

2 of 4

TYPICAL SYSTEM RISER

1 3 5 7

2 4 6 8

910111213 15 17 19

14 16 18 2021222324

LNK
/ACT

G1 G2

LNK
/ACT

LNK
/ACT

PoE

MASTER

1 23 4

5 67 8

STACK ID

PWREPSDIAG

TEMPFAN

LNK/ACT FDX/HDX

G3 G4

STACKING
PORT

SELECT

RESET

Paradigm Touchscreen

P-TS7

Ethernet Switch

Paradigm ERn2

Sensor3

™

Power Control Rack

Ethernet

Ethernet

Ethernet

Response

4-Port Gateway

Eos Ti Console

Source Four LED

Series 2

Ethernet

etcconnect.com

Power

Network

TM

Mk2 DMX Gateway

serial number

3060167

Intertek

USC

Model RSN-DMX4-DIN

TM

Network

Power

etcconnect.com

Mk2 DMX Gateway

3060167

Intertek

USC

Response

4-Port DIN Gateway

PUSH

DMX OUTPUT

DMX

DMX Plug-in Station

ETCNet

PUSH

Ethernet Cable

DMX Cable

DMX Cable

Response Mk2 DIN Rail GatewaysETC

Gateway Series

3 of 4

PHYSICAL

UNLESS OTHERWISE SPECIFIED

PO Box 620979
Middleton WI 53562-0979

etcconnect.com

Fax [phone]

Toll Free [phone]

Tel [phone]

3031 Pleasant View Rd

ETC, Inc.

ALL DIMENSIONS ARE IN INCHES.

REPRESENTATIVE:

APPLICATIONS ENGINEER:

DATE

PROJECT MANAGER:

ORIGINAL FILE:

BY REV.

LOCATION:

DRAWING TITLE:

CONTRACT WITH:

JOB:

JOB NUMBER:

Response Mk2 DIN Rail GatewaysETC

Gateway Series

Response DIN Rail Gateway Dimensions

MODEL HEIGHT WIDTH DEPTH

in mm in mm in mm

RSN-DMX-DIN 3.53 90 6.36 162 2.39 61

Response DIN Rail Gateways

Power

Network

Intertek

USC

3060167

Mk2 DMX Gateway

TM

Model

RSN-DMX4-DIN
RSN-DMX2-DIN
RSN-DMX1-DIN

Response DIN Rail Gateways Weights

MODEL WEIGHT SHIPPING WEIGHT

lb kg lb kg

RSN-DMX*-DIN 0.56 0.25 2.00 0.91

etcconnect.com

Model
RSN-DMX4-DIN
RSN-DMX2-DIN
RSN-DMX1-DIN

Model
RSN-DMX4-DIN
RSN-DMX2-DIN
RSN-DMX1-DIN

etcconnect.com

etcconnect.com

Intertek

Intertek

Power

Network

USC

3060167

3060167

USC

Power

Network

Mk2 DMX Gateway

Mk2 DMX Gateway

TM

TM

Corporate Headquarters l Middleton, WI USA
Global Offices l London, UK l Rome, IT l Holzkirchen, DE l Paris, FR l Hong Kong l Singapore l New York, NY l Orlando, FL l Los Angeles, CA

Copyright©2019 ETC. All Rights Reserved. All product information and specifications subject to change. Rev A 10/19

Trademark and patent info: etcconnect.com/IP

etcconnect.com

4 of 4