ETC E-APS Datasheet
®
Unison Echo® EchoConnect™ Station Power ETC
Supply
Echo Control Series
GENERAL INFORMATION
A member of ETC’s Unison Echo family of lighting-control and
power-control products, the Echo Station Power Supply provides
EchoConnect power for stations, Responsive Controls and Power
Controllers. The Echo Station Power Supplies are designed for
use with distributed Echo Control Systems, Unison
Enclosures with Echo control, Echo Relay Panels and Sensor3 Power
Control Systems.
APPLICATIONS
• Houses of worship
• Education
• Hospitality
• Healthcare facilities
• Office buildings
• Conference rooms
• Meeting rooms
• Retail
FEATURES
• Designed for use with any EchoConnect-enabled station,
Responsive Controls or Echo Power Controllers
• EchoConnect: Two-wire, topology-free system gives you the
freedom to put stations where you need them
• Multiple form factors and mounting options available
• Plug and play: ready to go out of the box with no software or
programming required
SYSTEM LIMITATIONS
• Up to 500 meters (1640 feet) of control wiring
• DRd, Wall- and Rack-Mount:
- Up to 16 stations and Responsive Controls
- Up to 16 power controllers or panels
• Echo Station Power Supply
- Up to six stations and Responsive Controls
- Up to six power controllers or panels
GENERAL
• UL and cUL LISTED
• CE marked
®
DRd Power
ORDERING INFORMATION
EchoConnect Power Supplies
MODEL DESCRIPTION
E-SPS Echo Station Power Supply, Knockout Mount
E-SPM-WM Wall-Mount Station Power Module
E-SPM-RM Rack-Mount Station Power Module
E-SPM DRd Station Power Module
E-SPM-WM-A Wall-Mount Station Power Module with 24V Aux
E-SPM-RM-A Rack-Mount Station Power Module with 24V Aux
E-SPM-A DRd Station Power Module with 24V Aux
E-APS 24V Aux Power Supply, Knockout Mount
EchoConnect Power Supply Accessories
MODEL DESCRIPTION
E-C5T-ST Category-5 Station Wiring Kit
E-C5T-WM Category-5 Wiring Termination Box
E-C5T-RM Category-5 Wiring Termination Tray
Compatible Stations and Sensors
MODEL DESCRIPTION
E100X Inspire
E1104 Inspire Fader Station
ELS Light Sensor
EOCC Occupancy/Vacancy Sensor
EPS05/ EPS10 Preset Stations
E-ATC Echo TimeClock
®
Button Stations
1 of 6
Unison Echo EchoConnect Station Power SupplyETC
Echo Control Series
ORDERING INFORMATION
Compatible Interfaces
MODEL DESCRIPTION
EACC EchoAccess™ Interface
EDMXC Echo DMX Scene Controller
Compatible Power Controls
MODEL DESCRIPTION
ERC One-Zone Relay Controller
EDRC Two-Zone Relay Controller
ELD One-Zone 0-10V Dimming Controller
EDLD Two-Zone 0-10V Dimming Controller
ESSC One-Zone SmartSpace Controller
EDSSC Two-Zone SmartSpace Controller
ELVD 600-Watt Phase Adaptive Dimmer
ERP/ERP-FT Echo Relay Panel/Echo Relay Panel Feedthrough
DRd Unison DRd with Echo Control
SR3 Sensor3 Power Control System
SPECIFICATIONS
FUNCTIONAL
• Provides EchoConnect power for up to 6 or16 stations or
Responsive Controls and 6 or 16 power controllers or panels
• Supports 500 meters (1640 feet) of control wiring from the
DRd enclosure
MECHANICAL
• Echo Station Power Supply
- Mounts using half-inch conduit knockout
- Constructed of injection-molded ABS plastic
• DRd, Wall- and Rack-Mount:
- 18-gauge formed steel construction
- Fine-texture, scratch-resistant, epoxy paint
- Convection cooled
- Fully-contained plug-in module with no discrete wire
connections (DRd only)
- Front panel status indicators
- Wall-mount and 19-inch rack-mount variants available
ELECTRICAL
• 100V-277V, 50/60Hz, two-wire+GND power input
• Optional 24V Aux power options for connected devices
• EchoConnect two-wire control network utilizing low-voltage
Class 2 wiring
• Topology-free and polarity-independent wiring over Belden
8471 or equivalent and one #14 ESD drain wire
• Wiring may be bus, loop, homerun or any combination
of these
• Up to 500 meters (1,640 feet) of control wiring per system
• Supports optional Cat5 or better wiring using Belden 1583A
or equivalent
- Requires optional Cat5 termination accessories
• UL and cUL LISTED
• CE marked
THERMAL
• Echo Station Power Supply:
- Ambient room temperature: 0-50°C / 32-122°F
- Ambient humidity: 5-95% non-condensing
• DRd, Wall- and Rack-Mount
- Ambient room temperature: 0-40°C / 32-104°F
- Ambient humidity: 10-90% non-condensing
2 of 6
Loading...