DISPLAY
Display
Normal mode
display
Setting mode
display
A B
Pushbutton
INFORMATION
Description of the symbols used
All settings are accessed via a single push-button.
Short pressin: <0,5sec. Increment
Longer pressing: >1 sec. Select
Long pressing: >2 sec. Setting mode
Sustained pressing: >5 sec. Exit
Repeated short pressing will allow you to select
the display mode:
Hours/Minutes: HH ´ MM Normal mode
Days/Months: D D ´ MM [Timeout 10sec.]
Minutes/Seconds: MM ´ SS [Timeout 120sec.]
SETTING THE TIME
Select the normal mode display
(hours/minutes).
A long pressing of the push-button
(> 2 sec.) will take you to the setting mode.
Phase 1:
Select the time format (12h - 24h).
Repeated short pressings will allow you
to change between the two formats.
The display blinks.
Note:
The seconds are automatically set to zero.
Timeout 120sec.
Phase 2:
Setting of hours.
A longer pressing (> 1 sec.) will take you
to the hour setting mode.
C
2
Repeated short pressings will allow you
to move the hours forward.
Phase 3: A longer pressing (> 1 sec.)
will take you to the minute setting mode.
Repeated short pressings will allow you
to move the minutes forward.
A longer pressing (> 1 sec.) will end the
setting mode.
CHRONOGRAPHE
AVEC ALARME
ETA K04.001
410 778 - 16.11.2004 / ETA / 00
SETTING THE DATE
Select the Days/Months display.
A long pressing of the push-button
(> 2 sec.) will take you to
the setting mode.
Phase 1:
Setting of the tens of the year.
Repeated short pressings will allow
you to move the tens of the year forward.
The digit indicating the tens of
the year is blinking.
Timeout 120 sec.
Phase 2:
Setting of the units of the year.
A longer pressing (> 1 sec.) will take
you to the units of the year setting mode.
Repeated short pressings will allow
you to move the units of the year forward.
Phase 3: A longer pressing (> 1 sec.)
will take you to the month setting mode.
Repeated short pressings will allow
you to move the months forward.
Phase 4:
A longer pressing (> 1 sec.) will take you
to the day setting mode.
Repeated short pressings will allow you
to move the days forward.
A longer pressing (> 1 sec.) will end
the setting mode.
General notes:
A sustained pressing (> 5 sec.) will allow
you to exit the setting mode.
The watch will return to the normal mode.
This will happen automatically if the push-button
is not pressed for 120 sec. (timeout).
D
DISPLAY TEST
Select the Minutes/Seconds mode.
A long pressing of the push-button
(> 2 sec.) will take you to the
test mode.
All segments of the display will be visible
simultaneously for 2 seconds so that the
proper functioning of the display can be
verified.
After that, the watch will automatically
return to the normal mode (hours/minutes).
E