16,5 cm (6.5”) 2-Way Component-System
80 Watt RMS / 160 Watt MAX.
Impedance 4 Ohms
Frequency Response 55 - 22000 Hz
160 mm Poly Cone Woofer
25 mm Silk Dome Neodymium Tweeter
12dB Crossover
Mounting Depth: 58 mm
Mounting Diameter: 140 mm
Compatibility:
BMW 3-SERIES (E46) except Compact
Important Notes:
This guide is an installation aid for a proper installation of the sound system.
Please read the following instructions:
•Please treat all parts of the sound system and the components of your vehicle with caution.
•Follow under all circumstance the regulations of the vehicle manufacturer and do not make
any modifications on the vehicle, which could interfere the driving safety.
•Always ensure the correct polarity of all connections.
Legal Note:
•ESX or Audio Design GmbH is in no way affiliated with the Bayerische Motoren Werke AG or any
of its subsidiaries or affiliated companies connected to, or is acting on its behalf or with its authorization.
•All registered product names, trade marks and brands are the property of their respective owners.
•The compatibility with the specified types of vehicles reflects the information available on January 2015.
•Technical changes and errors reserved.
Customer Service:
In general, the assembly and installation of the sound system should be made by a trained and technically skilled specialists. If you nonetheless choose the self-assembly and you have any problems, contact your specialist dealer or the Audio Design Service Department under Tel.
+49 (0) 7253 - 94 65 93 or by E-Mail to speakers@audiodesign.de
2
Page 3
INTERCONNECTION
Please operate the tweeters only, when they are connected with the supplied in-line crossover.
ENGLISH
Woofer
+
--
Signal input from the amplifier/signal source
Optional: cut through the wire for a – 3dB tweeter level attenuation
Die Ihnen vorliegende Anleitung ist eine Einbauhilfe zur fachgerechten Montage des Soundsystems.
Beachten Sie dazu die folgenden Hinweise:
•Behandeln Sie bitte alle Teile des Soundsystems und die Komponenten Ihres Fahrzeugs grundsätzlich mit Vorsicht.
•Beachten Sie unter allen Umständen die Vorschriften des Fahrzeugherstellers und nehmen Sie keine Veränderungen
am Fahrzeug vor, welche die Fahrsicherheit beeinträchtigen könnten.
•Achten Sie unbedingt beim Anschließen auf die korrekte Polarität.
Rechtlicher Hinweis:
•ESX bzw. die Audio Design GmbH sind in keiner Weise mit der Bayerische Motoren Werke (BMW) AG oder einer ihrer
Tochtergesellschaften oder Partner-Unternehmen verbunden, oder handeln in deren Auftrag oder mit deren Autorisierung.
•Alle geschützten Produktnamen und Markennamen sind das Eigentum ihrer jeweiligen Inhaber.
•Die Kompatibilität mit den angegebenen Fahrzeugtypen entspricht dem Informationsstand vom Januar 2015.
•Technische Änderungen und Irrtum vorbehalten.
Kundenservice:
In der Regel ist die Montage und Installation des Soundsystems von einem geschultem und technisch versierten Spezialisten vorzuneh-
men. Sollten Sie sich dennoch für eine Selbstmontage entscheiden, wenden Sie sich bei Problemen an Ihren Fachhändler oder an die
Serviceabteilung von Audio Design unter Tel. +49 (0) 7253 - 94 65 93 oder per E-Mail an speakers@audiodesign.de
4
Page 5
DEUTSCH
VERKABELUNG
Bitte betreiben Sie die Hochtöner nur, wenn diese an die mitgelieferte In-Line-Kabelweiche angeschlossen sind.
Bass-Lautsprecher
+
--
Signal-Eingang vom Verstärker oder der Signalquelle
Optional: durchtrennen Sie den Draht für eine –3dB Hochtonabschwächung
Impédance 4 Ohms
Réponse en fréquence 55 - 22000 Hz
Woofer polycone de 160 mm
Tweeters néodyme de 25 mm, Coupole en Soie
Filtre Crossover 12dB
Profondeur de montage 58 mm
Diamètre de montage 140 mm
Compatibilité:
BMW Série 3 (E46) sauf Compact
Notes Importantes:
Ce guide est une aide pour réaliser une installation correcte du système de sonorisation.
Merci de lire attentivement les instructions suivantes :
•Traiter toutes les parties du système de sonorisation et les composants de votre véhicule avec précaution.
•Suivez en toute circonstance les prescriptions du fabricant du véhicule et ne faites aucune modification
sur le véhicule qui pourrait interférer sur votre sécurité pendant la conduite.
•Assurez-vous que vous branchez la polarité.
Note Légale:
•ESX ou Audio Design GmbH n´est en aucune façon associés ou liés la Bayerische Motoren Werke AG ou de toutes ses filiales
ou sociétés affiliées ou agissant en son nom ou avec son autorisation.
•Tous les noms de produits ou marques déposées sont la propriété de leurs propriétaires respectifs.
•La compatibilité avec les types de véhicules déterminés reflète l´information disponible en Janvier 2015.
•Nous nous réservons le droit de modifier les données techniques sans préavis.
Service Client:
Nous vous recommandons de faire appel à un spécialiste qualifié pour procéder à l´installation de votre système sonore dans votre véhicule.
Si toutefois vous souhaitez procéder à l´installation vous même et que vous rencontrez des difficultés ou problèmes, contacter votre spécialiste
agréé ou le service Audio Design au: Tel. +49 (0) 7253 - 94 65 93 ou par email à speakers@audiodesign.de
6
Page 7
CÂBLAGE
S‘il vous plaît exécuter le tweeter que si elles sont connectées à la crossover.
FRANÇAISE
Woofer
+
--
Entrée de signal de l‘amplificateur/ source de signal
Optionnel: couper à travers le fil de - 3 dB d‘atténuation du niveau du tweeter
Crossover
EXEMPLE DE MONTAGE
3er E46 Coupé porte3er E46 Sedan porte avant
Tweeter
3er E46 Sedan tablette arrière3er E46 Convertible panneau arrière
7
Page 8
ITALIANO
INFORMAZIONI IMPORTANTI
VS165C BMW
Specifiche tecniche:
16,5 cm (6.5“) Sistema 2 Vie Separato
80 Watt RMS / 160 Watt MAX.
Impedenza 4 Ohm
Risposta in frequenza 55 - 22000 Hz
Woofer polycone de 160 mm
Tweeter cupola in seta da 25 mm
Crossover 12dB
Profondità di montaggio 58 mm
Diametro di montaggio 140 mm
Compatibilità:
BMW Serie 3 (E46) tranne Compact
Importante:
Questo manuale di istruzioni e di montaggio è una guida per ottenere il massimo delle prestazioni del proprio sistema, si consiglia di leggere
attentamente:
•Adottate la massima attenzione e cura per i componenti del vostro sistema audio e del vostro veicolo.
•Seguire sempre le indicazioni e le regole del costruttore del veicolo in ogni circostanza e non apportare
modifiche alla stessa che possa interferire con la sicurezza stradale.
•Assicurarsi di collegare la polarità corretta.
Note legali:
ESX e Audio Design GmbH non sono in nessun modo associati con Bayerische Motoren Werke AG, ( BMW ) o ad aziende da loro controllate
o affiliate. ESX e Audio Design GmbH non sono autorizzate in nessun modo ad operare in conto per nome del marchio BMW.
Tutti i loghi e marchi registrati sono di proprietà dei rispettivi titolari. Compatibilità tecniche indicate nel manuale sono state aggiornate e svi-
luppate con informazioni ed indicazioni disponibili in data Gennaio 2015.
ESX e Audio Design GmbH si riservano il diritto di cambiare e di aggiornare dati tecnici senza ulteriore preavviso.
Servizio di postvendita:
Si consiglia vivamente di fare eseguire l’installazione e montaggio dei sistemi audio, solo da tecnici formati ed altamente specializzati, qualora
si decida di effettuare l’installazione in proprio e si incontrano dei problemi tecnici o dubbi, si prega di contattare il proprio dealer autorizzato
o contattare direttamente:
Audio Design Service Department telefonicamente, +49 (0) 7253 -94 65 93 o via e-mail a speakers@audiodesign.de
8
Page 9
COLLEGAMENTI
Si prega di operare solo i tweeter, quando sono collegati con la dotazione in linea crossover.
Opzionale: tagliare il filo per una - 3dB attenuazione livello del tweeter
Crossover
ESEMPIO D’INSTALLAZIONE
3er E46 Coupé porta3er E46 Berlina porta anteriore
Tweeter
3er E46 Berlina posteriore scaffale
3er E46 Cabriolet pannello posteriore
9
Page 10
ESPANOL
NOTAS IMPORTANTES
VS165C BMW
Especificaciones:
Sistema de vías Separadas 16.5 cm (6.5”) 2-Vías
80 Watt RMS / 160 Watt MAX.
Impedancia 4 Ohmios
Resposta de frequência 55 - 22000 Hz
Woofer polycone de 160 mm
Tweeter de 25 mm de cúpula de seda
Filtro de 12dB
Profundidad de montaje: 58 mm
Diámetro de montaje: 140 mm
Compatibilidad:
BMW Serie 3 (E46) excepto Compact
Importante:
Esta guía es una ayuda para realizar una instalación adecuada del producto.
Por favor lea detenidamente las siguientes instrucciones:
•Por favor, trate las partes del sistema de sonido y los componentes de su vehículo con cuidado.
•Mantenga intactas todas las regulaciones de seguridad originales del fabricante del vehículo, no
modifique ningún elemento que pueda interferir en la seguridad de conducción.
•Asegúrese de conectar la polaridad correcta.
Nota legal:
•ESX o Audio Design GmbH no se encuentra en modo alguno asociado o vinculado a Bayerische Motoren Werke AG o
cualquiera de sus empresas afiliadas o subsidiarias y en consecuencia no actúa en su nombre ni bajo su autorización.
•Todos los nombres registrados o marcas, son propiedad de sus respectivos dueños.
•La compatibilidad con los tipos de vehículo especificados reflejan la información disponible en Enero de 2015.
•Cambios técnicos y errores reservados.
Servicio al cliente:
Por norma general, la instalación de este producto debería ser realizada por un profesional cualificado. Si Vd. Decide instalar el producto por
su cuenta y se encuentra con dificultades, contacte con su instalador de confianza o con el departamento de servicio post-venta de Audio
Design al Tel. +49 (0) 7253 - 94 65 93 o por E-Mail a speakers@audiodesign.de
10
Page 11
CONEXIóN
Por favor, operar los tweeters sólo, cuando están conectados a los incluidos en filtros.
ESPANOL
Woofer
+
--
Señal de entrada del amplificador/señal fuente
Opcional: cortar el cable para una atenuación de - 3 dB el nivel de tweeters
Filtro
EJEMPLO DE MONTAJE
3er E46 Coupé puerta3er E46 Sedán puerta principal