essential ENDURANCE HD W1802, W1650-1 Featherlight, W1660-1 demiFeatherlight Instructions Manual
ITEM # W1802
Made in China
2011 ESSENTIAL MEDICAL SUPPLY, INC.
®
Manufactured for
Orlando, FL 32822
Weight Capacity: 500 lbs.
Heavy Duty Four Wheeled Walker
Page 1
-- SAVE THESE INSTRUCTIONS --
SET UP INSTRUCTIONS
1. Remove all contents from carton and remove protective packaging,
including the cardboard panel between the rear wheels. The carton
should contain the following:
Do not use the walker if there is apparent damage and / or if
parts are missing.
Please call place of purchase for repair / return information.
Do not attempt to adjust or operate your walker
without carefully reading all instructions in this manual. If, after reading
this manual, you have any questions, please call your health professional
or place of purchase, otherwise injury or damage may occur.
Vinyl Tote
Height Adjustment
Knobs (2) With
Bolts Attached
Loop Brakes Handles
are attached to the
Frame by Cables (2)
Backrest
Serial No. Label
on back
(Silver label, number
starts with “RM-E”)
Page 2
2. Open frame by pushing down on the hinged folding mechanism so
that the hinged bar is level.
SET UP INSTRUCTIONS
3. Insert the backrest, handles and tote.
(a) To insert the backrest, push pins on the outside of the backrest
and insert backrest into the brackets on the front of the walker
frame. Once properly installed, the backrest should click into
place and the pins should protrude into the holes.
(b) Unscrew the bolts and height adjustment knobs from handles
and insert handles into the frame of the walker while making
sure the cables are on the outside of the frame.
(c) Adjust the handle height as directed by your physician,
physical therapist or trained professional. Insert the bolt from
inside of the frame so that the hex head ts snugly into the six
sided hole.
(d) Firmly screw the knob until fully tightened, making sure that the
bolt head is still securely recessed into the frame.
(e) Place the tote under the seat of the walker, between the frame
tubes. Secure the tote with the snap button aps.
Vinyl Tote
Height Adjustment
Knobs (2) With
Bolt Attached
Hinged Folding
Mechanism
Loop Brakes Handles
are attached to the
Frame by Cables (2)
Backrest
Backrest
Receiving
Tube
Serial No. Label
on back
(Silver label, number
starts with “RM-E”)
4. Be sure all attached hardware is tightened securely.
Loading...