Page 1
FE
Long moulder
The FE long moulder is suitable to work slack dough such as Tuscan type and all types of dough that need to be strengthened
during the moulding process.
1/1 version 00 december 2014
Standard features
Painted steel casings and structure mounted on wheel.
Painting with dual cycle anti-corrosion treatment using
epoxy powders (food contact).
Feeding conveyor belt suitable to be used with Esmach
volumetric dividers and conical rounders equipped with
powered conveyor belt when placed at a 90° angle.
Rolling through two adjustable opening rolls.
Pre-winding device to prepare dough portions for long
moulding.
Long moulding takes place in two consecutive phases:
the first adjustable pressing device, featuring polyethylene sides, reinforces dough and starts the moulding process, while the second adjustable and interchangeable
pressing device completes the moulding process. The
second pressing device can be flat-shaped or rounded
depending on the desired loaf shape, i.e. with cut-off ends
or elongated ends.
Adjustable dosage flour duster.
Performances: piece weight from 200/300 up to 2000 gr.
with loaf maximum lenght of 450 mm.
Detail of pressin device
MODEL -
FE FE Long moulder
ESMACH S.p.A. Tel. + 039 0444 419777 sales@esmach.com - www.esmach.com
Description
Page 2
TECHNICAL AND DIMENSION FEATURES
2400
D
142
D = 110 mm
DATI TECNICI-TECHNICAL FEATURES
POTENZA INSTALLATA-INSTALLED POWER Kw
POTENZA MAX ASSORBITA-MAX ABSORBED POWER Kw
PESO - WEIGHT kg
VOLUME IMBALLO - PACKING VOLUME m³
CONNESSIONE ELETTRICA - PLUG COUPLING
1,11
1,11
380
1,7
3PH+Gr
ESMACH S.p.A. Tel. + 039 0444 419777 sales@esmach.com - www.esmach.com
Loading...