ESMACH EM-45 User Manual
EM/45
Proprietà di Esmach SpA - riproduzione vietata
Electronic water doser-mixer EM/45
The doser-mixer is an electronically controlled device used to have, with high precision, water at the selected temperatures and
doses for the recipes of dough.
1/1 version 00 december 2014
Standard features
This equipment dispenses and mixes thermostatically: pipe
water, warm water, refrigerated water with connections and
combinations according to needs.
Stainless steel structure.
Visualization on 3 separate displays of the water quantity
and temperature, and of the temperature measured by the
external probe.
Electronically controlled with microprocessor, 80 preset
recipes.
The water quantity to take is set on a digital keyboard
Temperature selector knob.
Probe for measuring the outside temperature with an
extendible cable up to 5 meters.
Remote control of water chiller pump.
Interior fittings in bronze, brass and stainless steel.
Drainage of water not at set temperature with a manual by-
pass
P.S.: hydraulic connection excluded
Option
3 WAY KIT - fittings in chromed brass and stainless steel, for
feeding to 3 tubes (warm, refrigerated and pipe water).
EM 45 technical data
Water connections
Max. water entry temperature
Setting range
Temperature precision
Max. water entry pressure
Min. water entry pressure
Max. ratio between entry pressures
Maximum dosing
Dosing precision
Water delivery at 1 bar and 20°C
Water delivery at 5 bar and 20°C
Voltage/Frequency 1 Ph+N+Gr
Absorbed power
“ 1/2
°C 65
°C 1÷60
+/-°C 1
bar 5
bar 1
bar 1:5
l 999,9
+/- % 1
l/min 18
l/min 40
V/Hz
VA 25
230-110/50-60
MODEL
EM/45
Option
3 Way Kit
ESMACH S.p.A. Tel. + 039 0444 419777 sales@esmach.com - www.esmach.com
Description
Electronic water doser-mixer
Maximum dosing 999,9 lt.
Voltage-Frequency V 230-110/50-60
Fittings in chromed brass and stainless steel, for feeding to 3 tubes (warm, refrigerated and pipe water)
300
Doser - Mixer EM/45
210
Cold(-er)Warm(-er)
1
2
15
3
16
14
4
30
17
5
35
40
45
50
55
25
12
20
15
7
10
5
MANUAL PROG. RUNBY- PASS
13
216
6
7 8 9 10 11 12
1. Ball rapids portcullis with OR seal
2. Pipelines with OR seal, to facilitate the installation
3. Filters impurities, in double stainless steel mesh
4. Non return valves
5. Temperature adjustement knob with two reference scales (hot and pipe water; pipe and refrigerated water)
6. Probe for measuring the outside temperature with a extendible cable up to 5 meters
7. Power plug with fuse and spare and plug for pump remote control with fuse and spare
8. Digital display for temperature setting and actual on discharge , in a tenth of grade
9. Digital display for temperature detected by the external probe , in a tenth of grade
10. Push button to move from inlet quantity to the temperature and vice versa
11. START push buttons to begin or restarting dosing and STOP/C for manual stopping or for the possible cancellation
of memory displayed.
12. Stainless steel and plastic food dosing tube
13. By-pass junction to be connected to a discharge
14. Series of warning lights
15. Digital keyboard for setting and recall memory, or manual discharge
16. Digital display for set-liters, for those still to be discahrged (during the dosage) or already discharged (after
pressing STOP/C)
3 WAY KIT (option) - to connect the device to warm, and to select the
inlets water manually.
ESMACH S.p.A. Tel. + 039 0444 419777 sales@esmach.com - www.esmach.com
Loading...