Thank you for choosing GIGAStation. You have made the best choice for a Hard Disk
Sampler Tool Kit as you will find out shortly.
GIGAStation is the new alternative to the sampler. By using your hard disk as sampler
memory, you can enjoy creativity on a much larger scale than ever imagined.
GIGAStation is the audio card specifically designed for use with GigaStudio. It includes all
the features you need to build a hard disk sampler from scratch.
Features
GIGA-WIRE
GIGA-WIRE is the driver technology developed by Ego Sys/Audio Trak which routes the
output of GigaStudio into the inputs of ASIO. You can record directly from Cubase and insert
all VST plugins into Cubase under the channels streaming from GigaStudio.
20-bit D/A converter
GIGAStation has 20-bit D/A converters. You can work with the best quality audio using the
20-bit D/A converters.
8 Analog Outputs
GIGAStation provides eight 1/4” stereo phone jack outputs.
5.1/7.1 ch. Dolby Surround
GIGAStation can be used for 5.1/7.1 ch. Dolby Surround sound. You will need a DVD ROM
and DVD software player to build a high-quality surround system. Also, you can produce
surround audio with software capable of producing surround sound using a Dolby surround
DVD player in your computer.
S/PDIF Coaxial Digital output
GIGAStation has an S/PDIF coaxial digital output port that will minimize signal loss when
transferring digital data to or from other digital equipment including MD and DAT players.
3
CD-ROM Analog Input
GIGAStation has an analog input port to connect the CD-ROM drive analog output that allows
you to listen to audio CDs with your CD-ROM drive.
Various Sample Rate Support
GIGAStation supports various sample rates from 32kHz, to 44.1kHz and 48kHz. GIGAStation
automatically detects the sample rate in order to select the appropriate sample rate. You will only
need to set up the sample rate in your software in order to have GIGAStation set it accordingly.
32-bit PCI Slot for PCI Bus Mastering Support
GIGAStation uses only a small amount of system resources. This allows you to use more
software plug-in effects without placing a heavy burden on the CPU.
What’s in the box
GIGAStation is shipped with the following contents:
1 GIGAStation PCI Card
2. GIGAStation connector
3. GS2120 MIDI Interface CARD
4. GS2120 Cable
5. Four MIDI connector plugs
6. Installation disk
7. This manual
8. Nemesys GigaStudio LE (CD)
9. Nemesys GigaPiano (CD)
10. GM500 (CD)
11. Power DVD (CD)
4
GIGAStation PCI CARD
1. Analog Outputs 1,2
2. Analog Outputs 3,4
3. Analog Outputs 5,6
4. Analog Outputs 7,8
- Four ports are stereo, so there is a total of 8 Outputs.
5. Coaxial SPDIF Output: GIGAStaion’s 2 channel output port. You can use this for
connecting a DAT player, etc.
5
Note:
In this port, the output is the same as Analog 7,8 of GIGAStation.
If you want to use the digital output, you have to choose Analog outputs 7 and 8.
Note:
In Coaxial, You need only one RCA jack for stereo output, because it’s digital.
Don’t use this RCA jack for analog equipment.
6. DOUT – 2 pin Output connector
Using a 2 pin cable, you can access the SPDIF format Output.
7. CD In – CD-ROM
8. GS 2120 connector: You can connect the GS2120 here.
6
About the GS2120
The GS2120 is a 2 In, 2 Out MIDI Interface from EGO SYS. The GS2120 is ONLY
designed to be used with the EGO SYS GIGAStation.
You can use it easily with a simple installation. The GS 2120 is an easy installation device and
does not require any power supply, IRQ setting, or driver to install.
The GS2120 driver is already included in the driver of GIGA Station.
Therefore, by the installation of the driver for GIGAStation, you can use the GS2120 right
away. The GS2120 can be used under Windows 98SE/ME/2000 with GIGA Station. One
point of interest is that it will work under Windows 2000 to provide the most stable MIDI work
environment.
1. MIDI Input 1 : Connect to Keyboards or MIDI Controllers
2. MIDI Input 2 : Connect to Keyboards or MIDI Controllers
3. MIDI Output 3 : Connect to Sound Modules
4. MIDI Output 4 : Connect to Sound Modules
5. Connect to the GIGAStaion
7
CHAPTER 2. Hardware Installation
System Requirements:
To take advantage of the GIGAStation and its full capacity, the computer specifications are
very important. Even though the GIGAStation is built to have low-CPU dependability, the
computer needs to meet some requirements in order to achieve maximum performance. The
GIGA Station is not just a simple soundcard, but a multimedia digital audio device with
various functions. Therefore, the performance of the GIGAStation is affected by the
computer specs that are required to process a vast amount of digital data. A faster CPU,
faster hard disk, and larger amounts of RAM are recommended.
Minimum system requirements:
1. Intel Pentium II CPU
2. 64MB of RAM
3. One available PCI slot
4. Microsoft Windows 98 SE/ME/2000 Operating System
5. Ultra DMA 33 hard disk drive
Recommended System Requirements:
1. Intel Pentium III CPU or higher
2. More than 128MB of Ram
3. One available PCI Slot
4. Microsoft Windows 98/ME/2000 Operating System
5. UDMA 66/100 7200 rpm hard disk drive
*** For using the GS2120, you need an open space in your computer rack. However,
the GS2120 doesn’t need to be inserted in a PCI slot.
8
Hardware Installation
GIGAStation PCI card
9
To install the GIGAStation card in your computer:
1. Turn off your computer. Leave it plugged in so that it is grounded.
2. Open the computer case. Remove the screw and the rear slot cover of an available PCI
expansion slot in your computer.
3. Discharge any static electricity that may be on your clothes or body by touching a
grounded metal surface such as the power supply case inside the computer.
4. Remove the card from its anti-static bag.
5. Push the card firmly but gently into the PCI slot until the card’s connector clicks into
place. Make sure that the audio connectors at the end of the card go through the rear slot of
the computer.
6. Attach the rear bracket of the card to the computer, using the screw from the rear slot
cover.
10
GS2120 MIDI Interface
To install the GS2120 card in your computer:
1. You require one empty slot close to the GIGAStation.
2. Connect the GS2120 connection cable to the GIGAStation connector. The cable can
be connected only one way.
3. Place the GS2120 into the empty slot. Be careful not to touch other cards to avoid any
damage to the cards.
11
Loading...
+ 25 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.