Escalade Sports P1202 User Manual

PRESTEGE

We strive to ensure that our products are of the highest quality and

free of manufacturing defects or missing parts. However, if you

have any problems with your new product,

DO NOT RETURN IT TO THE STORE,

please contact us toll free @:

1-866-556-2757

FAX: [phone]

[e-mail]

Or write to:

Escalade Sports

Customer Service Department

P.O. Box 889

Evansville IN 47706

Please have your model number when inquiring about parts.

When contacting Escalade Sports please provide your model number, serial number (if
applicable), and part number if requesting a replacement part. These numbers are
located on the product, packaging, and in this owners manual.

Your Model Number _______________________

© 2002 Escalade Sports

P1202

1

For Customer Service Call 1-866-556-2757

IMPORTANT! READ THIS MANUAL ALL THE
WAY THROUGH BEFORE BEGINNING TO
PUT YOUR GAME TABLE TOGETHER! THEN
READ EACH STEP BEFORE STARTING
THAT STEP.

TWO ADULTS ARE REQUIRED TO ASSEMBLE

THIS GAME TABLE

Tools Required:

Allen Wrench H10 and H11 Included with the table
Phillips Screwdriver
Furniture Polish and Cloth

An electric screwdriver is helpful in assembly. However, please set at low torque and use
extreme caution with an electric screwdriver because you could overtighten the hardware
and strip the screws.

Assembly Tips

Make sure you understand the following tips before you begin to assemble your soccer table.

1. When installing parts that have more than one bolt, start ALL the bolts in that part by
hand before tightening anything.

2. Some drawings or images in this manual may not look exactly like your product. Please
read and understand the text before starting each assembly step.

READ AND FOLLOW ALL ASSEMBLY, OPERATION, AND

SAFETY INSTRUCTIONS CAREFULLY. AT LEAST TWO

ADULTS ARE NEEDED TO PUT THIS GAME TABLE

TOGETHER.

© 2002 Escalade Sports

2

For Customer Service Call 1-866-556-2757

© 2002 Escalade Sports

3

For Customer Service Call 1-866-556-2757

© 2002 Escalade Sports

4

For Customer Service Call 1-866-556-2757

© 2002 Escalade Sports

5

For Customer Service Call 1-866-556-2757

1. Find a clean, level place to begin the assembly of your pool table. We recommend
building the table on the box top to protect the parts during assembly.

2. Place the main cabinet P1 on the ground with the playing side down.

3. Unfold all the panels as shown below. Apply glue P12 to ALL the edges and ends of the
long rail sections P1A and P1B and the short rail sections P1C, P1D, and P1E that will be
attached to one another.

4. Attach long rail sections P1A and P1B to each short rail sections P1C, P1D, and P1E with
flat head screw H3 as shown in Figure 1.

DO NOT OVER TIGHTEN SCREWS.

Figure 1

© 2002 Escalade Sports

6

For Customer Service Call 1-866-556-2757