Escalade sports M01473 User Manual

We strive to ensure that our products are of the highest quality

and free of manufacturing defects or missing parts. However, if

you have any problems with your new product,

DO NOT RETURN IT TO THE STORE,

please contact us toll free @:

1-888-996-2729

FAX: [phone]

[e-mail]

Please have your model number when inquiring about parts.

Or write to:

Escalade Sports

Customer Service Department

P.O. Box 889

Evansville IN 47706

Please have your model number when inquiring about parts.

When contacting Escalade Sports please provide your model number , serial number (if
applicable), and part number if requesting a replacement part. These numbers are
located on the product, packaging, and in this owners manual.

Y our Model Number _______________________

M01473

1

IMPORTANT! READ THIS MANUAL ALL THE
WAY THROUGH BEFORE BEGINNING TO
PUT YOUR GAME TABLE TOGETHER! THEN
READ EACH STEP BEFORE STARTING
THAT STEP.

TWO ADULTS ARE REQUIRED TO ASSEMBLE

THIS GAME

Tools Needed

Wrenchs H13, H14, and H15 Included with the Hardware Kit
Philips Screwdriver
Adjustable Wrench or Socket Set is helpful but not required.

IMPORTANT!

Make sure you understand the following tips before you begin to assemble your game.

1. Make sure you build the unit in the room you will keep it in. The assembled unit will
NOT fit through a standard door opening when complete.

2. This is an electrically operated product. It is intended for INDOOR use ONL Y.

3. This product is not designed to use in a garage or on a patio, sunlight may effect
the infrared sensors and the unit will not perform correctly.

4. Tighten hardware as you complete each step.

5. Do not overtighten hardware, as you could crush the tubing.

6. Some drawings or images in this manual may not look exactly like your product.

7. You may need to move the unit if it does not perform correctly. Sunlight or Halogen
lighting may have an effect on the infrared sensors performance. Do not put directly
in front of a window .

READ AND FOLLOW ALL ASSEMBLY, OPERATION, AND

SAFETY INSTRUCTIONS CAREFULL Y. AT LEAST TWO

ADULTS ARE NEEDED TO PUT THIS GAME TABLE

TOGETHER!

2

345

CAUTION:

Assemble the unit in the room you wish to keep
it in. It will NOT fit through a standard door
opening when completely assembled.

1. Attach the support tube P2 between the two front base tubes P1 using bolts H2
as shown in Figure 1.

Figure 1

2. Slide rear base tubes P3 onto the front base tubes P1 and attach with support
tube P2 using bolts H2 as shown in Figure 2.

Figure 2

3. Snap the two front upright tubes P4 to the ends of the front base tubes P1 as
shown in Figure 3.

Figure 3

4. Attach stabilizer tube P5 in the LOWER set of holes as shown in Figure 4,
using bolts H2 and nuts H3.

Figure 4

6