Net Kit Installation Instructions
1. If you game is currently set up, slide the net off of the net posts by pulling up on
the net. Next remove the net posts with a Phillips Screwdriver.
2. If your game is new and not assembled, use these instructions to attach the
playfield netting instead of the outfield netting that is supplied with your game.
3. Peel the backing off the velcro strips provided with this kit. Apply the narrow
velcro strips to the top edge of the side aprons. Apply the wide velcro strips to
the back of the outfield aprons. If needed you may also staple the velcro to
the aprons.
4. Apply the net as shown in the photo below to cover the entire playfield.
© 2003 Escalade Sports
For questions please contact us toll free @
1-888-996-2729
FAX: 1-866-873-3535
arcadegames@escaladesports.com
1
For Customer Service Call 1-888-996-2927