Escalade sports G07602 User Manual

We strive to ensure that our products are of the highest quality

and free of manufacturing defects or missing parts. However, if

you have any problems with your new product,

DO NOT RETURN IT TO THE STORE,

please contact us toll free @:

1-866-556-2759

FAX: [phone]

[e-mail]

Or write to:

Escalade Sports

Customer Service Department

P.O. Box 889

Evansville IN 47706

Please have your model number when inquiring about parts.

When contacting Escalade Sports please provide your model number, serial number (if
applicable), and part number if requesting a replacement part. These numbers are
located on the product, packaging, and in this owners manual.

Your Model Number _______________________

© 2003 Escalade Sports

G07602

1

For Customer Service Call 1-866-556-2759

IMPORTANT! READ THIS MANUAL ALL THE
WAY THROUGH BEFORE BEGINNING TO
PUT YOUR GAME TABLE TOGETHER! THEN
READ EACH STEP BEFORE STARTING
THAT STEP.

TWO ADULTS ARE REQUIRED TO ASSEMBLE

THIS GAME TABLE

Tools Required:

Wrench H10 and H11 Included with the Hardware Kit
Phillips Screwdriver
Furniture Polish and Cloth

An electric screwdriver is helpful in assembly. However, please set at low torque and use
extreme caution with an electric screwdriver because you could overtighten the hardware
and strip the screws.

Assembly Tips

Make sure you understand the following tips before you begin to assemble your soccer table.

1. When installing parts that have more than one bolt, start ALL the bolts in that part by
hand before tightening anything.

2. Some drawings or images in this manual may not look exactly like your product. Please
read and understand the text before starting each assembly step.

READ AND FOLLOW ALL ASSEMBLY, OPERATION, AND

SAFETY INSTRUCTIONS CAREFULLY. AT LEAST TWO

ADULTS ARE NEEDED TO PUT THIS GAME TABLE

TOGETHER.

© 2003 Escalade Sports

2

For Customer Service Call 1-866-556-2759

© 2003 Escalade Sports

3

For Customer Service Call 1-866-556-2759

© 2003 Escalade Sports

4

For Customer Service Call 1-866-556-2759

1. Find a clean, level place to begin the assembly of your pool table.

2. Push two of the leg assemblies together around a leg base P6 as shown in
FIGURE 1.

3. Attach a leg top P4 to the leg assemblies using bolts H3 and washers H6.
Also attach the leg base P6 using bolts H4 and washers H6 as shown in
FIGURE 1.

REMEMBER TO START

ALL HARDWARE BY

HAND BEFORE YOU

TIGHTEN ANYTHING.

Figure 1

© 2003 Escalade Sports

5

For Customer Service Call 1-866-556-2759