Escalade Sports G03615 User Manual
We strive to ensure that our products are of the highest quality
and free of manufacturing defects or missing parts. However, if
you have any problems with your new product,
DO NOT RETURN IT TO THE STORE,
please contact us toll free @:
1-866-556-2758
FAX: 1-866-873-3531
tablehockey@escaladesports.com
Or write to:
Escalade Sports
Customer Service Department
P.O. Box 889
Evansville IN 47706
Please have your model number when inquiring about parts.
When contacting Escalade S port s please provide your model number, serial number (if
applicable), and part number if requesting a replacement part. These numbers are
located on the product, packaging, and in this owners manual.
Y our Model Number _______________________
© 2004 Escalade Sports
G03615
1
For Customer Service Call 1-866-556-2758
IMPORTANT! READ THIS MANUAL ALL THE
WAY THROUGH BEFORE BEGINNING TO
PUT YOUR GAME TABLE TOGETHER! THEN
READ EACH STEP BEFORE STARTING
THAT STEP.
TWO ADULTS ARE REQUIRED TO ASSEMBLE
THIS GAME TABLE
Tools Required:
Allen Wrench H5 - Included with the table
Phillips Screwdriver
Furniture Polish and Cloth
An electric screwdriver is helpful in assembly. However, please set at low torque and use
extreme caution with an electric screwdriver because you could overtighten the hardware
and strip the screws.
Assembly Tips
Make sure you understand the following tips before you begin to assemble your hockey table.
1. When installing parts that have more than one bolt, start ALL the bolts in that part by
hand before tightening anything.
2. Some drawings or images in this manual may not look exactly like your product. Please
read and understand the text before starting each assembly step.
READ AND FOLLOW ALL ASSEMBL Y, OPERA TION, AND
SAFETY INSTRUCTIONS CAREFULLY. AT LEAST TWO
ADULTS ARE NEEDED TO PUT THIS GAME TABLE
TOGETHER.
© 2004 Escalade Sports
2
For Customer Service Call 1-866-556-2758
© 2004 Escalade Sports
3
For Customer Service Call 1-866-556-2758
1. Find a clean, level place to begin the assembly of your hockey table. We
recommend building the table on the box top to protect the parts during assembly.
Place the main cabinet P1 on the ground with the playing surface facing down.
2. Using the Wrench provided H5, attach the legs P2 and P3 to the main cabinet P1
using bolts H1 and washers H2 and nuts H3 as shown in FIGURE 1. Leave the
hardware HANDTIGHT at this point. Repeat this step for all four legs.
CAUTION:
DO NOT TIGHTEN LEG
HARDWARE AT THIS
TIME.
Figure 1
© 2004 Escalade Sports
4
For Customer Service Call 1-866-556-2758
3. Attach the end panels P4 to the inside of the legs using screws H4 as shown in
FIGURE 2. Make sure to center the panel and have it towards the bottom of the
legs as shown.
4. Attach the spreader P5 between the legs with screws H4 as shown in FIGURE 2.
Figure 2
MAIN CABINET NOT SHOWN
5. Tighten all hardware at this time.
THIS STEP REQUIRES TWO OR MORE ADULTS.
FOR CLARITY.
VERY CAREFULLY TURN THE TABLE OVER AND SET IT ON
ITS LEGS. BE CAREFUL, THE TABLE IS VERY HEAVY.
© 2004 Escalade Sports
5
For Customer Service Call 1-866-556-2758
6. After you have turned to the table over to its upright position attach the puck
catchers P5 using screws H4 as shown in FIGURE 3.
Figure 3
7. Peel the backing off the felt pad A2 and attach it to the striker A1 as shown in
FIGURE 4.
Figure 4
8. After you have attached the puck catcher, set the table where you want it in your
Game Room. Plug the cord into a suitable 120v household outlet and turn the motor
on by turning the switch that is built into the cord.
© 2004 Escalade Sports
6
For Customer Service Call 1-866-556-2758
Loading...