Escalade sports G01608 User Manual

We strive to ensure that our products are of the highest quality

and free of manufacturing defects or missing parts. However, if

you have any problems with your new product,

DO NOT RETURN IT TO THE STORE,

please contact us toll free @:

1-866-556-2759

FAX: [phone]

Panel

[e-mail]

Or write to:

Escalade Sports

Customer Service Department

P.O. Box 889

Evansville IN 47706

Please have your model number when inquiring about parts.

When contacting Escalade Sports please provide your model number , serial number (if
applicable), and part number if requesting a replacement part. These numbers are
located on the product, packaging, and in this owners manual.

Y our Model Number _______________________

4

© 2003 Escalade Sports

G01608

1

For Customer Service Call 1-866-556-2759

I

MPORTANT! READ THIS MANUAL ALL THE
WAY THROUGH BEFORE BEGINNING TO
PUT YOUR GAME TABLE TOGETHER! THEN
READ EACH STEP BEFORE STARTING
THAT STEP.

TWO ADULTS ARE REQUIRED TO ASSEMBLE

THIS GAME TABLE

Tools Required:

Allen Wrenchs H9 and H10 Included with the Hardware Kit
Phillips Screwdriver
Furniture Polish and Cloth

An electric screwdriver is helpful in assembly. However, please set at low torque and use
extreme caution with an electric screwdriver because you could overtighten the hardware
and strip the screws.

Assembly Tips

Make sure you understand the following tips before you begin to assemble your soccer table.

1. When installing parts that have more than one bolt, start ALL the bolts in that part by
hand before tightening anything.

2. Some drawings or images in this manual may not look exactly like your product. Please
read and understand the text before starting each assembly step.

READ AND FOLLOW ALL ASSEMBLY, OPERA TION, AND

SAFETY INSTRUCTIONS CAREFULLY . AT LEAST TWO

ADULTS ARE NEEDED TO PUT THIS GAME TABLE

TOGETHER.

2

© 2003 Escalade Sports

3

For Customer Service Call 1-866-556-2759

7. Once you have end panels secure set the playfield support braces P12 onto
the bottom of the playfield. Attach the braces using brackets P11 and screws
H7 as shown in FIGURE 3.

Figure 3

8. Center the goal P14 over the opening in the end panel and attach using
screws H7 as shown in FIGURE 4. Center the ball catcher P13 over the
opening in the side panel and attach using screws H7. Make sure the round
opening for the ball runner is towards the floor as shown in FIGURE 4.
Repeat for both ends of the table. Attach the ball runner P6 between the ball
catcher and the goal.

r

Figure 4

7

8

© 2003 Escalade Sports

5

For Customer Service Call 1-866-556-2759