Escalade sports G01605 User Manual
We strive to ensure that our products are of the highest quality
and free of manufacturing defects or missing parts. However, if
you have any problems with your new product,
DO NOT RETURN IT TO THE STORE,
please contact us toll free @:
1-866-556-2759
FAX: 1-866-873-3531
foosball@escaladesports.com
Or write to:
Escalade Sports
Customer Service Department
P.O. Box 889
Evansville IN 47706
Please have your model number when inquiring about parts.
When contacting Escalade Sports please provide your model number, serial number (if
applicable), and part number if requesting a replacement part. These numbers are
located on the product, packaging, and in this owners manual.
Your Model Number _______________________
© 2003 Escalade Sports
G01605
1
For Customer Service Call 1-866-556-2759
IMPORTANT! READ THIS MANUAL ALL THE
WAY THROUGH BEFORE BEGINNING TO
PUT YOUR GAME TABLE TOGETHER! THEN
READ EACH STEP BEFORE STARTING
THAT STEP.
TWO ADULTS ARE REQUIRED TO ASSEMBLE
THIS GAME TABLE
Tools Required:
Allen Wrench H10 Included with the Hardware Kit
Open End Wrench H11 Included with the Hardware Kit
Phillips Screwdriver
Furniture Polish and Cloth
An electric screwdriver is helpful in assembly. However, please set at low torque and use
extreme caution with an electric screwdriver because you could overtighten the hardware
and strip the screws.
Assembly Tips
Make sure you understand the following tips before you begin to assemble your soccer table.
1. When installing parts that have more than one bolt, start ALL the bolts in that part by
hand before tightening anything.
2. Some drawings or images in this manual may not look exactly like your product. Please
read and understand the text before starting each assembly step.
READ AND FOLLOW ALL ASSEMBLY, OPERATION, AND
SAFETY INSTRUCTIONS CAREFULLY. AT LEAST TWO
ADULTS ARE NEEDED TO PUT THIS GAME TABLE
TOGETHER.
© 2003 Escalade Sports
2
For Customer Service Call 1-866-556-2759
© 2003 Escalade Sports
3
For Customer Service Call 1-866-556-2759
© 2003 Escalade Sports
4
For Customer Service Call 1-866-556-2759
© 2003 Escalade Sports
5
For Customer Service Call 1-866-556-2759
1. Find a clean, level place to begin the assembly of your soccer table. We
recommend building the table on the box top to protect the parts during
assembly.
2. Place one side panel P1 UPSIDE DOWN with the finished side facing out
as shown in FIGURE 1. The ball entry hole will be closest to the floor.
3. Align the rods as shown in FIGURE 1. Please note the location of the hole
that is near one end of each rod. This is the handle end of the rod. There
will be four handles on each side of the table. It is critical that you set the
rods as shown below so the table will be correct when flipped over.
Figure 1
CAUTION:
Set the rods as shown noting the
location of the hole / handle end.
© 2003 Escalade Sports
6
For Customer Service Call 1-866-556-2759
4. Once you are sure you have the rods set up correctly, slide the other side
panel P1 onto the rods as shown in FIGURE 2.
5. Set the playfield P3 into the grooves in the side panels as shown in
FIGURE 2.
Figure 2
6. Using the Allen Wrench provided H10 attach the end panels P2 using bolts
H4, washers H5 and barrel nuts H9 as shown in FIGURE 3. Use caution not
to over tighten the screws. Use a screwdriver to get the correct alignment of
the barrel nut.
Figure 3
© 2003 Escalade Sports
7
For Customer Service Call 1-866-556-2759
7. Once you have end panels secure set the playfield support braces P7 onto
the bottom of the playfield. Slide the cabinet rods H6 through the side panel
and down the groove on the support brace. Secure with locknuts H7 and
washers H5 as shown in FIGURE 4.
Figure 4
8. Push the triangle insersts P9 into the corners as shown below to elivate the
playfield in the corners. There will be two per side panel and two per end
panel.
© 2003 Escalade Sports
8
For Customer Service Call 1-866-556-2759
Loading...