Escalade sports B8207 User Manual
OWNER'SOWNER'S
OWNER'S
OWNER'SOWNER'S
MANUALMANUAL
MANUAL
MANUALMANUAL
AA
CRYLIC BACRYLIC BA
A
CRYLIC BA
AA
CRYLIC BACRYLIC BA
CKBOCKBO
CKBO
CKBOCKBO
ARDARD
ARD
ARDARD
WARNING
FAILURE TO FOLLOW THESE
WARNINGS MAY RESULT IN
SERIOUS INJURY AND/OR
PROPERTY DAMAGE.
Owner must ensure that all
players know and follow these
rules for safe operation.
! Do not dunk on this unit
! Do not hang from any part of the
unit, including the backboard, rim, or
net.
! Do not slide, climb, or play on pole.
! Check unit before each use for loose
hardware, excessive wear, and
signs of corrosion and repair before
using.
! During play, use extreme caution to
keep players face away from the
backboard, rim, and net.
! Wear a mouthguard when playing
to avoid dental injuries.
! During play, do not wear jewelry
(rings, watches, necklaces, etc.).
Objects may entangle in net.
ANDAND
AND
ANDAND
PRO GOPRO GO
PRO GO
PRO GOPRO GO
MODEL NUMBER
Thank you for buying our basketball pole. We try hard to ensure that our products are of high quality and
free of manufacturing defects and of missing parts. However, if you have any problems with your
basketball pole, such as a manufacturing defect or a missing part, please DO NOT RETURN IT TO THE
STORE. Call us at:
TOLL FREE 1-800-426-1421
(THIS IS A CONSUMER ONLY NUMBER)
CUSTOMER SERVICE DEPT., P.O. Box 889, Evansville, IN 47706
Please provide model number, serial number, and/or part number of the product and/or part when you call or
write. These numbers can be found on the product, packaging, or in this owner's manual.
AL COMBOAL COMBO
AL COMBO
AL COMBOAL COMBO
B8207B8207
B8207
B8207B8207
FAX: (812) 467-1399
Or write us at:
READ THESE
INSTRUCTIONS
CAREFULLY!
To make assembly of your
backboard and goal easier,
use this Hardware Identifier
to identify and sort all
fasteners.
1
2L-6565-00
This kit is designed for installation on a variety of basketball pole systems.
Two of the most common applications are illustrated in this manual. Please
read through these instructions completely to determine whether or not you
will be able to install this kit onto your basketball pole system.
Locate the two holes toward the top of the backboard frame. Use
1.1.
1.
1.1.
these holes to mount the backboard (#1) to the upper board
mounting brackets (FIG. 1), or the angled brackets (FIG. 2),
depending on your basketball system.
Attach using two hex bolts (#11), lock washers (#9), and flat washers
(#7). Tighten these fasteners securely.
Figure 2
2.2.
2.
2.2.
3.3.
3.
3.3.
Figure 1
Locate the yellow bolt (#14) and yellow jam nut (#15) in
hardware bags. Assemble nut and bolt to backplate (#4) as
shown in Detail A. Tighten securely by threading nut and
bolt against one another .
Next, Attach top half of backplate (#4) and plastic boot (#3)
through your backboard and mounting brackets with two
bolts (#6), four washers (#7), two lockwashers (#9), and
two hex nuts (#10).
Do not tighten nuts tight yet.Do not tighten nuts tight yet.
Do not tighten nuts tight yet. (FIG.3).
Do not tighten nuts tight yet.Do not tighten nuts tight yet.
4.4.
4.
4.4.
Detail A
Figure 3
Slide goal assembly (#2) over hex bolt (#14) (FIG. 4).
Slide leaf spring (#5) over hex bolt (#14) and brace on
goal assembly. Secure with two bolts (#6), four washers
(#7), two lockwashers (#9), and two hex nuts (#10) through
backboard and mounting brackets. Square up goal and
tighten all four nuts tight.
Figure 4
2
Loading...