ESAB LAF 1601M, LAF 1601 Instruction Manual
Instruction manual
0449 507 101 GB 20170901
Valid for: serial no. 126-xxx-xxxx
LAF1601 / LAF1601M
TABLE OF CONTENTS
0449 507 101 © ESAB AB 2017
1
SAFETY ......................................................................................................... 4
2
INTRODUCTION............................................................................................ 7
3
TECHNICAL DATA ........................................................................................ 8
4
INSTALLATION.............................................................................................. 9
4.1 Location..................................................................................................... 9
4.2 Connections.............................................................................................. 10
5
OPERATION .................................................................................................. 12
5.1 Controls..................................................................................................... 12
6
MAINTENANCE............................................................................................. 13
6.1 Cleaning .................................................................................................... 13
6.1.1 Welding power source ............................................................................ 13
6.1.2 Contactor................................................................................................ 13
7
ORDERING SPARE PARTS.......................................................................... 14
DIAGRAM ............................................................................................................. 15
CONNECTION INSTRUCTION............................................................................. 17
ORDERING NUMBERS ........................................................................................ 19
Rights reserved to alter specifications without notice.
1 SAFETY
0449 507 101
- 4 -
© ESAB AB 2017
1 SAFETY
Users of ESAB equipment have the ultimate responsibility for ensuring that anyone who
works on or near the equipment observes all the relevant safety precautions. Safety
precautions must meet the requirements that apply to this type of equipment. The following
recommendations should be observed in addition to the standard regulations that apply to
the workplace.
All work must be carried out by trained personnel well-acquainted with the operation of the
equipment. Incorrect operation of the equipment may lead to hazardous situations which can
result in injury to the operator and damage to the equipment.
1. Anyone who uses the equipment must be familiar with:
○ its operation
○ location of emergency stops
○ its function
○ relevant safety precautions
○ welding and cutting or other applicable operation of the equipment
2. The operator must ensure that:
○ no unauthorised person is stationed within the working area of the equipment
when it is started up
○ no-one is unprotected when the arc is struck or work is started with the
equipment
3. The workplace must:
○ be suitable for the purpose
○ be free from drafts
4. Personal safety equipment:
○ Always wear recommended personal safety equipment, such as safety glasses,
flame-proof clothing, safety gloves
○ Do not wear loose-fitting items, such as scarves, bracelets, rings, etc., which
could become trapped or cause burns
5. General precautions:
○ Make sure the return cable is connected securely
○ Work on high voltage equipment may only be carried out by a qualified
electrician
○ Appropriate fire extinguishing equipment must be clearly marked and close at
hand
○ Lubrication and maintenance must not be carried out on the equipment during
operation
CAUTION!
This product is solely intended for arc welding.
1 SAFETY
0449 507 101
- 5 -
© ESAB AB 2017
WARNING!
Arc welding and cutting can be injurious to yourself and others. Take precautions
when welding and cutting. Ask for your employer's safety practices which should
be based on manufacturers' hazard data.
ELECTRIC SHOCK - Can kill
• Install and earth the unit in accordance with applicable standards
• Do not touch live electrical parts or electrodes with bare skin, wet gloves
or wet clothing
• Insulate yourself from earth and the workpiece
• Ensure your working stance is safe
FUMES AND GASES - Can be dangerous to health
• Keep your head out of the fumes
• Use ventilation, extraction at the arc, or both, to take fumes and gases
away from your breathing zone and the general area
ARC RAYS - Can injure eyes and burn skin
• Protect your eyes and body. Use the correct welding screen and filter
lens and wear protective clothing
• Protect bystanders with suitable screens or curtains
FIRE HAZARD
• Sparks (spatter) can cause fire. Make sure therefore that there are no
inflammable materials nearby
NOISE - Excessive noise can damage hearing
• Protect your ears. Use earmuffs or other hearing protection.
• Warn bystanders of the risk
MALFUNCTION - Call for expert assistance in the event of malfunction.
Read and understand the instruction manual before installing or operating.
PROTECT YOURSELF AND OTHERS!
CAUTION!
Class A equipment is not intended for use in residential
locations where the electrical power is provided by the
public low-voltage supply system. There may be potential
difficulties in ensuring electromagnetic compatibility of class
A equipment in those locations, due to conducted as well
as radiated disturbances.
CAUTION!
Read and understand the instruction manual before
installing or operating.
1 SAFETY
0449 507 101
- 6 -
© ESAB AB 2017
NOTE!
Dispose of electronic equipment at the recycling
facility!
In observance of European Directive 2012/19/EC on Waste
Electrical and Electronic Equipment and its implementation
in accordance with national law, electrical and/or electronic
equipment that has reached the end of its life must be
disposed of at a recycling facility.
As the person responsible for the equipment, it is your
responsibility to obtain information on approved collection
stations.
For further information contact the nearest ESAB dealer.
ESAB has an assortment of welding accessories and personal protection equipment
for purchase. For ordering information contact your local ESAB dealer or visit us on
our website.
Loading...