ERSA SMT UNIT 60 A User Manual
212 FD
2
20
The SMT UNIT 60 A from ERSA
will handle virtually any soldering
job - whether it is SMD soldering,
desoldering or repair work.
It is electronically temperaturecontrolled and antistatic according
to MIL-SPEC/ESA-standards
and has two separately controlled
tools: the ultra-light ERSA Micro
tool SMD soldering iron and the
versatile ERSA Pincette 40 for
desoldering. An extensive range
of SMD soldering and desoldering
tips compliments these tools.
The Micro tool has a range of
long-lasting ERSADUR soldering
tips beginning at 0.2 mm (0.008“),
making it ideal for very fine and
compact soldering work. The
revolutionary ERSA MicroWell tip
enables you to install fine-pitch
SMDs in a matter of seconds.
The desoldering tip range of the
Pincette 40 covers everything
from MELFs and mini-MELFs to
SOIC packages, QFPs and PLCC’s.
Its wide range of tips means you
can use the ERSA SMT UNIT 60 A
to work on practically any
commercially available SMT
component. And because you can
change the rapid heat up tips
in a matter of seconds, even
when they are hot, you can work
quickly and efficiently.
ERSA SMT UNIT 60 A
SMD Soldering and Desoldering Station - to meet every budget
212 SD
212 BD
212 CD
212 ED
212 KD
212 MS
The multifunctional holder with
its swiveling sponge container
also functions as a hot tip holder.
The holder is designed so that you
can use ERSA soldering irons with
any commercially available solder
fume extraction system provided
you have an adapter.
A
B
C
Micro tool / Pincette 40
65 / 130 W heat up rating
The ultra-fine 0.2 mm (0.008”) tip (212 SD)
Quick and easy SMD rework
Cross section of an ERSADUR-
soldering tip (see p. 9)
Please ask for our tip sheet
with addtional tips!
212 WD
212 GD
2
1
2
1
2
1
2
1
2
2
2
1
2
Tips for SMD 8012
Tips for SMD 8013
Order nos:
SMT 60 A SMT UNIT 60 A soldering
and desoldering station
complete
consisting of:
SMT 603 A Electronic station
270 BDJ Micro tool soldering iron
with 212 BD soldering tip
430 EDJ Pincette 40 desoldering
tweezers with 422 ED
desoldering tips
A 29 Holder for Micro tool
A 30 Holder for Pincette 40
43400 Tip turn protection set
for type 422
43500 Tip turn protection set
for type 212 and 422
ERSA SMD tip holder
21
Technical data:
SMT 603 A electronic station
Supply voltage: 230 V~, 50-60 Hz
Secondary voltage: 24 V~
Rating: 60 W
Control technique: RESISTRONIC
Temperature range:
Micro tool:
stepless 150°C (300°F) - 400°C (750°F)
Pincette 40: subject to tips
Function display: red LED
Cable: 2 m (6.6 ft) PVC with connector
Model: safety insulated, antistatic
according to MIL-SPEC/ESA standards
The fully equipped tip holder makes
organizing and accessing your
SMD soldering/desoldering tips
an easy task, while at the same
time saving space!
Order nos.:
SMD 8012 SMD tip holder
completely equipped
consisting of:
SH 03 Tip holder
ERSADUR-SMD soldering tips
212 BD pencil point 0.4 mm ø
(0.016 in ø)
212 CD chisel shaped, 1.0 mm
(0.039 in)
212 ED chisel shaped, 1.8 mm
(0.071 in)
212 KD chisel shaped, extended,
1.8 mm (0.071 in)
SMD-desoldering tips (pair)
422 MD for MELFs a. MINIMELFs
422 ED 6 mm (0.236 in)
for SOIC 8
422 FD 1 10 mm (0.394 in)
for SOIC 16
422 FD 2 15 mm (0.591 in)
for SOIC 24
422 QD 1 12.5 mm (0.492 in)
for PLCC 28
422 QD 3 17.5 mm (0.689 in)
for PLCC 44
422 QD 4 20 mm (0.787 in)
for PLCC 52
422 QD 2 25 mm (0.984 in)
for PLCC 68
Desoldering tips (pair) for
Pincette 40
422 ED: 6 mm (0.236 in)
SOIC 8
422 FD 3: 7,5 mm (0.295 in)
SOIC 12
422 FD 1: 10 mm (0.394 in)
SOIC 16
422 FD 4: 12,5 mm (0.492 in)
SOIC 20
422 FD 2: 15 mm (0.591 in)
SOIC 24
422 FD 5: 17,5 mm (0.689 in)
SOIC 28
422 FD 6: 20 mm (0.787 in)
SOIC 32
422 FD 7: 25 mm (0.984 in)
SOIC 40
422 FD 8: 27,5 mm (1.082 in)
422 FD 9: 40 mm (1.574 in)
422 QD 5: 10 mm (0.394 in)
PLCC 20
422 QD 1: 12,5 mm (0.492 in)
PLCC 28
422 QD 6: 15 mm (0.591 in)
QFP, TQFP, TTQFP
TTQFP 80T25
422 QD 3: 17,5 mm (0.689 in)
PLCC 44
422 QD 4: 20 mm (0.787 in)
PLCC 52
422 QD 2: 25 mm (0.984 in)
PLCC 68
422 QD 7: 30 mm (1.191 in)
PLCC 84
422 QD 8: BQFP 132
422 QD 9: BQFP 100
422 RD 1: 22,5 x 16,5 mm
(0.886 x 0.650 in)
QFP 100
422 RD 2: 15 x 12,5 mm
(0.591 x 0.492 in)
PLCC 32
422 RD 3: 15 x 10 mm
(0.591 x 0.394 in)
PLCC 28-1
422 MD: MELFS/MINIMELFS
SMD 8012
Micro tool soldering iron
Voltage: 24 V~
Rating: 30 W / 280°C (545°F)
- 20 W / 350°C (660°F)
Heat up rating: 65 W
Heating time: appr. 50 s (to 280°C/545°F)
Weight (without cable): appr. 25 g (1 oz)
Cable: 1.2 m (3.9 ft) highly flexible/
heat resistant, antistatic
Model: antistatic according to
MIL-SPEC/ESA standards
4 22 QD 10: 22,5 mm (0.886 in)
QFP 112
Please ask for our free-of-charge
process descriptions
„Fine-Pitch Installation“ and
„SMD-removal“ (see page 31)
C.CAPAC./MELF
SOT&DPAK TSOP/SOIC PLCC/LCCC
BQFP/PQFP
Please choose your suitable SMD desoldering tips out of the series 422. (further SMD desoldering tips upon request)
2
1
2
1
1
2
2
2
2
1
1
2
1
1
422 SD: MICROMELF
2
SMD 8013
This extremely practical and
ergonomical tip holder is an
indispensable aid that no SMD
workbench should be without.
Order nos:
SMD 8013 SMD tip holder completely
equipped
consisting of:
SH 03 Tip holder
ERSADUR-SMD soldering tips
212 SD pencil point, 0.2 mm/0.008 in ø
212 BD pencil point; 0.4 mm/0.016 in ø
212 CD chisel-shaped, 1.0 mm/0.039 in
212 ED chisel-shaped, 1.8 mm/0.071 in
212 FD
chisel-sh., reinf., 2.2 mm/0.087 in
212 GD
chisel-sh., reinf, 3.2 mm/0.126 in
212 MS MicroWell, 2.3 mm/0.091 in
212 WD MiniMicroWell, 1.6 mm/0.063 in
SMD-desoldering tips (pair)
422 SD for MICROMELF
422 MD for MELFs a. MINIMELFs
422 ED 6 mm/0.236 in, for SOIC 8
422 FD 1 10 mm/0.394 in, for SOIC 16
422 FD 4 12.5 mm/0.492 in, for SOIC 20
422 FD 2 15 mm/0.591 in, for SOIC 24
422 FD 5 17.5 mm/0.689 in, for SOIC 28
422 FD 6 20 mm/0.787 in, für SOIC 32
422 QD 5 10 mm/0.394 in, for PLCC 20
422 QD 3 17.5 mm/0.689 in, for PLCC 44
1
2
Tips for SMD 8012
Tps for SMD 8013
2
Pincette 40 desoldering tweezers
Voltage: 24 V~
Rating: 2 x 30 W / 280°C (545°F)
- 2 x 20 W / 350°C (660°F)
Heat up rating: 130 W
Heating time: subject to tips
Weight (without cable): appr. 75 g (3 oz)
Cable: 1.2 (3.9 ft) m highly flexible/
heat resistant, antistatic
Model: antistatic according to
MIL-SPEC/ESA standards
1
2
Loading...