Ericsson LG LSP430G Users Manual

LSP-430G USER GUIDE

Please read this manual carefully before operating your set.
Retain it for future reference.

LSP-430G EN_090303 2009.3.3 11:12 AM 페이지1

Congratulations on your subscription to the LSP­430G Fixed Wireless phone. This phone has been
designed to operate on the IS-2000 Air Protocol
over the 800MHz band. And the phone has the
advanced user interface similar to mobile phone. It has
greatly enhanced voice clarity and provides various
advanced features.

Key phone features:

ᶀ

Wide view, Graphic, Backlit Display

ᶀ

Polyphonic Ring tones: A choice of 15 melodies
and 5 bell sounds available

ᶀ

Large Phonebook with 500 entries

ᶀ

Speed Dialling for upto 99 numbers

ᶀ

3 Way call conferencing

ᶀ

Enhanced SMS features - Group SMS.

ᶀ

Hands free Speaker Phone

ᶀ

Receiver Off-Hook tone

ᶀ

Adjustable Ringer Volume, Earpiece Volume, Key
Volume, Speaker Volume

ᶀ

A Menu driven interface with prompts for easy
operations

ᶀ

Serial port for Diagnostic.

ᶀ

Organiser: Scheduler, Alarm, Memo, Calculator,
World Clock with DST, Stopwatch

ᶀ

Fast charging battery

ᶀ

Voice and Data Service (Internet Access)

Highlights

Highlights

2

LSP-430G EN_090303 2009.3.3 11:12 AM 페이지2

1. Important Information 4

1.1 Safety Instruction 4

1.2 Optimal Phone Performance 4

1.3 Care and Service 5

1.4 Safety Information 6

2. Introduction 9

2.1 Front View of the Phone 9

2.2 LCD Display 10

2.3 Installation 11

2.4 Installation Steps 14

3. Basic Operations 15

3.1 Making a Call 15

3.2 Redialing Last Number 15

3.3 3 way call conferencing 15

3.4 Volume Control 16

3.5 Receiving a Call 16

3.6 Lock Mode 16

3.7 Entering and Editing Information 17

4. Menu Tree 20

4.1 Names 24

4.2 Messages 26

4.3 Call History 31

4.4 Sound 33

4.5 Display 36

4.6 Settings 37

4.7 Organiser 43

5. Speaker Phone 46

6. Troubleshooting 47

7. General Information 48

7.1 Main Unit 48

7.2 AC/DC Adapter 48

7.3 Battery 49

CONTENTS

3

CONTENTS

LSP-430G EN_090303 2009.3.3 11:12 AM 페이지3

1. Important Information

Important Information

4

1.1 Safety Instruction

WARNING / CAUTION

To reduce the risk of fire or electric shock, do not
expose this phone to rain or moisture. Do not use this
phone in swimming pools or other water bodies.

1.2 Optimal Phone Performance

ᶀ

Do not hold the antenna when operating the
phone, or operate the phone when someone is
within four inches (ten centimeters) of the antenna.
Both cases affect the call quality and may cause the
phone to operate at a higher power level than
required.

ᶀ

For the best call quality, keep the antenna free from
obstructions and position the antenna upright.

ᶀ

Do not use the phone if the antenna is damaged.
Replace the damaged antenna immediately by a
qualified technician. Use only a manufacturer­approved antenna. Non-approved antennas,
modifications or attachments may impair call

quality and damage the phone.

ᶀ

RF energy may affect improperly installed or
inadequately shielded personal medical devices
such as pace-makers or hospital monitors. Consult
the manufacturer of any personal medical devices
to determine whether they are adequately shielded
from external RF energy. Turn your phone OFF in
health care centers if any regulations posted in the
area instruct you to do so. Hospitals or health care
centers may be using equipment that may be
sensitive to external RF energy.

ᶀ

If this phone causes harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:

- Reorient or relocate the receiving antenna

- Place the radio or television farther away from the
phone.

- Connect the equipment to an outlet on a circuit
different from that to which the phone is
presently connected.

4

LSP-430G EN_090303 2009.3.3 11:12 AM 페이지4

Regulatory Statements to be included in the Users Guide for Sputnik

USA-Federal Communications Commission (FCC)

This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.

This equipment has been tested an d f o un d t o comply with the limits for a Class B digital
device, pursuant to Part 15 of FCC R ule s. These limits are designed to pro vide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy. If not installed and used in
accordance with the instructions, it may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur i n a
particular installation.

If this equipment does cause harmful interference to radio or television reception, which
can be determined by tuning the equi pment off and on, the user is encoura ge d to t ry and
correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna

-Increase the distance between the equipment and the receiver.

-Connect the equipment to outlet on a circuit different from that to which th e receiver is
connected.

-Consult the dealer or an experie nced radio/TV technician for help.

Any changes or modifica tions not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.

Caution: Exposure to Radio Frequency Radiation.

To comply with FCC RF exposure compliance requirements, for mobile configurations, a
separation distance of at least 20 cm must be maintained between the antenna of this device and
all persons.

This device must not be co-located or operating in conjunction with any other antenna or
transmitter.

- Consult the Authorized LG-Nortel Dealer for
assistance of an experienced radio/TV technician.

ᶀ

Use battery, antenna and AC/DC power adapter
provided by LG-Nortel . Using parts made by any
other manufacturer may invalidate the warranty.

ᶀ

Only authorized personnel should service the
phone and its accessories. Faulty installation or
service can be dangerous and may invalidate the
warranty.

ᶀ

Do not use the phone in any designated “cellular
phone use” area.

ᶀ

Avoid using the phone in high temperature or
humidity.

ᶀ

Avoid spilling any liquid on the phone. If the phone
gets wet, turn the power off immediately. If the
phone doesn’t work, please contact the service
provider immediately.

ᶀ

Avoid shock or impact.

ᶀ

We recommend you to charge the backup battery
before initial use. The backup battery may be
discharged during delivery.

1.3 Care and Service

Before cleaning, always unplug the phone from the
wall outlet and remove the antenna (or disconnect the
antenna cable). Do not use liquid or aerosol cleaners;
use a damp cloth for cleaning.

If the phone doesn’t work, do not attempt to
disassemble it; contact the phone service agent for
assistance.

If any of the following conditions exist, unplug the
phone from the wall plug, remove the battery and call
the qualified engineer.

- The power supply cord is damaged or frayed.

- Liquid has spilled into the phone.

- The phone has been exposed to rain or water.

- The phone has been dropped or damaged.

- The phone does not function normally even after
following the operating instructions.

Important Information

1. Important Information

5

LSP-430G EN_090303 2009.3.3 11:12 AM 페이지5

WWAARRNNIINNGG

ᶀ

For safety, use only an adapter
approved by LG-Nortel .

LG-Nortel does not bear
responsibility for any faults that
may arise due to non-conformation
to this guide. Example: LSP-430G

(LG-Nortel Power Adapter
Source: DC 5V / 1A)

ᶀ

Do not, in any way, cause a
short-circuit. It may start a fire
or the phone may explode
causing injury.

ᶀ

Do not create a sudden impact
on the battery by throwing it. Do
not dispose off batteries by
putting them in a fire. They may
explode or catch fire due to the
electrolyte within.

1.4 Safety Information

CCAAUUTTII OONN

ᶀ

Do not use the phone with a car
battery. It may cause electric
shock, fire, breakdown or
transformation.

ᶀ

Avoid using the phone in high
temperature or humidity. Avoid
spilling any liquid on this phone.
If the phone gets wet, Switch off
phone and turn off AC power
supply.

ᶀ

Keep the phone dry.
Submersion, humidity, and
liquids contain minerals that
may corrode internal electronic
circuits.

ᶀ

Do not store or use the phone
in dusty or dirty areas as this
can damage the moving parts.

ᶀ

Do not store the phone in hot
areas. High temperatures can
shorten the life of electronic
devices, damage batteries, and
warp or melt certain plastics.

1. Important Information

Important Information

6

LSP-430G EN_090303 2009.3.3 11:12 AM 페이지6

Important Information

7

ᶀ

Do not store the phone in cold
areas. When the phone warms
upto its normal operating
temperature, moisture can form
inside the phone, which can
damage the internal electronic
circuit boards.

ᶀ

Do not attempt to open it. Non­expert handling of the device
could damage it. It may cause
fire, electric shock and
breakdown. Consult your
authorized LG-Nortel dealer for
assistance.

ᶀ

Do not drop, knock or shake the
phone. Rough handling may
break the internal circuit boards.

ᶀ

Do not use harsh chemicals,
cleaning solvents or strong
detergents to clean the phone.
Wipe it with a soft cloth that has
been slightly dampened in a mild
soap and water solution.

ᶀ

Do not paint the phone. Paint
can clog the device’s moving
parts and prevent proper
functioning.

ᶀ

During lightning, do not touch
the power plug or the phone
line. It may result in an electric
shock or death.

ᶀ

Do not install the phone under
direct sunlight or on an uneven
surface.

ᶀ

Before using the plug, check the
available power voltage.
Inaccurate power voltage may
cause fire and damage.

Example: LSP-430G Input
Voltage: 100 ~ 240V.

1. Important Information

LSP-430G EN_090303 2009.3.3 11:12 AM 페이지7

Important Information

8

ᶀ

Do not plug many power cords
into one outlet.
It may cause fire or electric
shock.

ᶀ

Do not remodel the power cord
or disassemble it.

If the power cord or plug is
impaired, do not use it.

It may cause fire or electric shock

ᶀ

Do not install the phone in an ill­ventilated place.
It may cause fire or a breakdown.

ᶀ

Do not touch the plug with wet
hands. When disconnecting the
power cord of any accessory,
grasp and pull out the plug itself
and not the cord. It may cause
fire or electric shock.

ᶀ

Do not put heavy objects on the
power cord. Do not bend the
power cord too much. It may
cause fire or electric shock.

ᶀ

Use only an LG-Nortel approved
battery and adapter. If not, it
may cause an explosion or result
in a short-circuit. LG-Nortel
does not bear any responsibility
for the damage.

ᶀ

When you disconnect the power
cord of any accessory, grasp and
pull the plug itself and not the
cord. It may cause the adapter to
breakdown.

1. Important Information

LSP-430G EN_090303 2009.3.3 11:12 AM 페이지8

4

Introduction

2. Introduction

9

2.1 Front View of the Phone

ῡ

Soft key 1 : Activates Menu state

②

Dial/Flash : Activates Dial or Flash state, make it possible to
redial from call history

③

Soft key 2 : Searches phone number list

④

(

▲

) : Moves to SMS Menu, Moves up in the Menu

⑤

(

▼

) : Selects Melody/Bell setting Menu, Moves down

in the Menu

⑥

END/PWR : Deactivates a state - End or Power ON/OFF

⑦

Clear : Deletes the last digit, Moves previous Menu, My Menu

⑧

() : Activates hands free speaker phone function

⑨

‘

*

’ : Input dial ‘*’, Makes a phone switch between the ‘Light

mode’ & the ‘earlier set mode’ after long-press

⑩

‘0’ : Input dial ‘0’, Makes a phone lock after long-press

⑪

‘#’ : Input dial ‘#’, Makes a phone input ‘space’ during text
entry operation

⑫

MIC

⑬

Attached Antenna

LSP-430G EN_090303 2009.3.3 11:12 AM 페이지9

12

910 11 12

3

13

5
6
7

8

2. Introduction

Introduction

10

2.2 LCD Display

The LCD shows icons on the top of the LCD screen.
Different indicators appear based on the phone's operating mode.

Lock mode

IIcc oonn OOppee rraattiinn gg CCoonn ddii ttii oonn

RSSI indicator: Indicates the signal strength in the service area.

No service: The phone is not receiving any system signal.

Bell (Light : ).

In use: Displayed when a call is in progress or the phone is in off-hook state

Alarm: Displayed when alarm time is set

Text message: Displayed when a text message is received

Voice message: Displayed when voice message are received

Text and Voice message: Displayed when text and voice messages are received.

Battery charge level: Indicates charged battery level

Charge complete (Others : , Only outlet (No battery) )

No AC power & Battery ON. But in low battery state

Roaming Service

LSP-430G EN_090303 2009.3.3 11:12 AM 페이지10

Introduction

2. Introduction

11

2.3 Installation

You should follow each step carefully as shown below in order to guarantee the proper operation of

CDMA Fixed Wireless Phone.

Main Phone

Dipole Antenna

AC/DC Power Adapter User Guide

LSP-430G EN_090303 2009.3.3 11:12 AM 페이지11

2. Introduction

Introduction

12

STEP I. Check Components

ᶀ

The following components are supplied for Fixed
Wireless Phone.

1. LSP-430G Main Phone with Handset -1EA-

2. Dipole Antenna -1EA-

3. AC/DC Power Adapter -1EA-

4. User Guide -1EA-

ᶀ

Please make sure that these components are
present before you begin to install the phone. If
any of the components are missing or damaged,
contact your service provider immediately.

STEP II. Place the Terminal

ᶀ

Place the phone on the stable flat surface area
(desk, table, etc.). Serious damage may result if the
phone is dropped. Do not place the phone within
1 meter of heaters or radiators.

This phone is designed for desktop usage. Avoid
the direct exposure to sunlight and dampness.

ᶀ

Read the SAFETY INFORMATION located in the
first part of this document before you place the
phone.

STEP III. Connect Components
(Please refer to “Installation Steps” in 2.4)

ᶀ

Connect the antenna to the TNC antenna
connector located at the top of the phone. If you
have placed the phone on a flat surface, position
the antenna upright.

ᶀ

Connect the curl cord of the handset to the RJ-11
port located on the bottom side of the phone.

ᶀ

Connect the AC/DC Adapter cable to the DC input
port located at the top of the phone.

- If it is correct, a beep tone will be heard.

- If it is not correct (Booting fails or beep tone is

not heard), you will have to reconnect the

adapter.

LSP-430G EN_090303 2009.3.3 11:12 AM 페이지12

ᶀ

Please observe the following to get better voice
quality.

1. Keep away from electrical appliances such as TV,
computer, radio etc.

2. Keep the phone in a high and central location
without any obstructions.

3. Raise the integral antenna of the phone to get
maximum strength as shown in the figure.

STEP IV. Check the LCD Display

ᶀ

After you follow the installation instruction step I
to step III, please check the LCD for normal
operation.

ᶀ

If you do not see the status of service, please
repeat the 4th instruction of step III.

Then confirm the status of phone to get the proper
signal strength from the service operator system.

Introduction

2. Introduction

13

LSP-430G EN_090303 2009.3.3 11:12 AM 페이지13

2. Introduction

Introduction

14

2.4 Installation Steps

Please follow the procedure below to install the phone properly.

Connect base­handset to the
handset connector.

Connect the antenna
to the TNC
connector (Turn
right).

Connect the AC
power supply.

1

2

Press END button to
operate initially.

4

3

LSP-430G EN_090303 2009.3.3 11:12 AM 페이지14

Basic Operations

3. Basic Operations

15

3.1 Making a Call

You can make a call as follows.

1. Pick up the handset or press button.

2. Listen for dial tone.

3. Enter the phone number with area code if

needed.

4. Wait for the Auto Dial Time-out or Press

button.

5. The call is connected and you may start

conversation.

6. To disconnect the call, replace the handset or

press button.

આ

When the user presses the button
after dialing any desired number, the phone makes
a call immediately.

3.2 Redialing Last Number

You can make a redial to last number, shown in All
Calls.

1. Pick up the handset or press button.

2. Listen for dial tone.

3. Press button.

4. The call is connected and you may start
conversation.

5. To disconnect the call, replace the handset or
press button.

આ

You can also dial any of the last 60
(Dialled+Received+Missed+In Call Memo) numbers
stored in All Calls.

3.3 3 way call conferencing

You can start tripartite conversation.

1. Enter the phone number of the 2nd party phone
while you are in telephonic conversation with 1st
party.

2. Press button.

This service should be provided by your service
provider.

DDiiaa ll// FFll aasshh

DDiiaa ll// FFll aasshh

DDiiaa ll// FFll aasshh

DDiiaa ll// FFll aasshh

LSP-430G EN_090303 2009.3.3 11:12 AM 페이지15