Ericsson LG LGP450 User Manual

GSM Fixed Wireless Phone

L G P - 4 5 0 A U s e r G u i d e

Please read this manual carefully before operating your set.
Retain it for future reference.

P/NO : MMBBxxxxx

APR/2010/ISSUE xx

Installing the SIM Card and Charging the Battery

Installing the SIM Card

When you subscribe to a cellular network,
you are provided with a plug-in SIM card
loaded with your subscription details, such as
your PIN, any optional services available and
many others.

1

2

Important!

▶

The plug-in SIM card and its contacts
can be easily damaged by scratches or
bending, so be careful when handling,
inserting or removing the card. Keep
all SIM cards out of the reach of small
children.

▶

To remove, push the back cover down.
Push the tab with one hand and lift the top
of the battery to separate.

3

4

Installing Main Phone

Please follow the procedure below to install the phone properly.

1

Connect basehandset to the
handset connector.

2

Fully charge
the battery
before using
it for the first
time.

Connect the antenna to the
TNC connector (Turn right).

3

Turn the antenna upright.

4

Connect the AC power
supply.

1

Basic Operation

END/PWR

Turning Your Phone On and Off

1. Hold down the

2. To switch the phone off, hold down the [END/PWR] key until the power-off image displays.

Making a Call

1. Pick up the handset or press

2. Listen for dial tone and enter the phone number.

3. Wait for the Auto Time-out or press [Dial/Flash] key.

4. The call is connected and you may start conversation.

5. To disconnect the call, replace the handset or press

Answering a Call

When the bell rings in idle state, you can receive a call as follows:

1. Pick up the handset or press the

2. Start a conversation. To disconnect the call, replace the handset or press the [Speaker
Phone] key.

Note After the call ends, the phone will go back to standby mode.

Making an International Call

1. Pick up the handset or press

2. Listen for dial tone.

3. Press and hold the
the international access code.

4. Enter the country code, area code, and the phone number.

5. The call is connected and you may start conversation.

6. To disconnect the call, replace the handset or press [Speaker Phone] key.

Redialing Last Number

1. Pick up the handset or press [Speaker Phone] key.

2. Listen for dial tone.

3. Press [Dial/Flash] key.

4. The call is connected and you may start conversation.

5. To disconnect the call, replace the handset or press [Speaker Phone] key.

3-way Call Conferencing

[END/PWR] key until the phone switches on.

[Speaker Phone] key.

[Speaker Phone] key.

[Speaker Phone] key.

[Speaker Phone] key.

key for the international prefix. The '+' character automatically selects

2

3-way Call Conferencing

Method 1

1. Enter the phone number of the 2nd party phone while you are in telephonic conversation with
1st party.

2. Press [Dial/Flash] key. And press [Dial/Flash] key again.

Method 2

1. Press [Dial/Flash] key while you are in telephonic conversation with 1st party.

2. If you listen to the dialing tone, Press the phone number of the 2nd party phone.

3. Press [Dial/Flash] key.

4. And press [Dial/Flash] key again.
This service should be provided by your service provider.

Call Wait

1. Press [Dial/Flash] key, you may start conversation with called number.

2. Re-press [Dial/Flash] key, you may start conversation with previous number.

Volume Control

1. Press [L ef t]/ [Right] key of navigation while in a call, to adjust speaker volume.

2. Press Option + Left Soft Key to prevent sound from your end during the call. To cancel Mute,
Press again + Left Soft Key.

Memo

Allow you to store number during the call.
To store number :

1. Press Option + 4(New Memo).

2. Enter up to 32 numbers using the keypad.

3. Press OK key to save.

Lock Mode

1. You can use a security code to avoid unauthorized use of the phone.

Press soft Left(Menu) + 4(Setting) + 6(Security) + 2(Phone Lock).

2. The phone is now locked. To unlock, press and enter lock code(Default 0000 ).

3

END/PWR

Dial/Flash

Entering Text

You can enter alphanumeric characters by using the phone's keypad. To change modes, press the

key.

T9 Mode

This mode allows you to enter words with only one keystroke per letter. Each key on the keypad
has more than one letter. The T9 mode automatically compares your keystrokes with an internal
linguistic dictionary to determine the correct word, thus requiring far fewer keystrokes than the
traditional ABC mode.

ABC Mode

This mode allows you to enter letters by pressing the key labeled with the required letter once,
twice, three or four times until the letter is displayed.

123 Mode (Numbers Mode)

Type numbers using one keystroke per number.

Symbol Mode

This mode allows you to enter special characters by pressing

key.

Quick feature reference

This section provides brief explanations of features on your phone.

Messaging Menu 1

This menu includes functions related to SMS (Short Message Services).

New message You can create functions related to SMS (Short Message Services).

Press soft Left(

Menu

) + 1(

Messaging

Inbox You will be alerted when you have received a message.

Press soft Left(

Menu

) + 1(

Messaging

) + 1(

) + 2(

New message

Inbox

).

) or

Message

button.

4