Ericsson TZC-500 Description of operation of the device
Uppgjord
(även faktaansvarig om annan) - Prepared (also subject responsible if other)
EMWCCR
Dokansv/Godkänd - Doc respons/Approved Kontr - Checked
MO/EAB/JP/D Christer Claesson
COAXIAL CABLE
1 GENERAL
Low loss coaxial cable up to 4 GHz. Modified RG - 8. Halogen free.
PRODUCT SPECIFICATION
Nr - No.
1301-TZC 500 32 Uen
Datum - Date
Rev
File
2006-02-17 K
1(4)
2 DESIGN
2.1 CONDUCTOR AWG10 Solid copper or copper clad aluminium:OD = 2.74 mm ± 0.025 mm
2.2 DIELECTRIC Extruded foamed polyethylene (PE):OD = 7.25 mm ± 0.13 mm
The dielectric shall adhere to the centre conductor.
2.3 SHIELDING Tinned plated copper wire (dia 0,15 mm) over wrapped Al-foil bonded to the dielec-
tric.100% foil coverage and minimum 85% braid coverage.
OD = max 8.24 mm
2.4 JACKET Extruded black polyethylene (LDPE).
OD = nom 10.16 mm ± 0.20
Uppgjord
Dokansv/Godkänd - Doc respons/Approved Kontr - Checked
(även faktaansvarig om annan) - Prepared (also subject responsible if other)
3 LIMITING VALUES
3.1 ELECTRICAL VALUES
Parameter Symbol Conditions Values Unit
Impedance Z 50 ± 2 Ω
Frequency range f DC-4 GHz
Capacitance C 78 pF/m
PRODUCT SPECIFICATION
Nr - No.
1301-TZC 500 32 Uen
Datum - Date
Rev
File
2006-02-17 K
2(4)
Conductor resistance DC R
Shield resistance DC R
Loop resistance DC R
C
S
L
Maximum attenuation at frequency: 140 MHz
Rated Voltage U
Breakdown voltage U
R
break
max. 4.6 Ω/Km
max. 5.9 Ω/Km
max. 10.0 Ω/Km
6.0
350 MHz
900 MHz
1800 MHz
1900 MHz
9.0
15.0
21.0
22.0
dB/100 m
600 V AC
2600 V DC
Tensile strength Cable > 1500 N
3.2 MECHANICAL VALUES
Parameter Symbol Conditions Values Unit
Dielectric adhesiveness to centre
conductor
According to 1521-
TZC 500 32.
> 80 N
Bending radius static min. 100 mm
3.3 ENVIRONMENTAL RESISTANCE
Temperature range - 40....+ 80 ˚C
4 MARKING
The cable shall be marked with at least the following text along the outside of the sheat,
per metre if not otherwise is stated below the table:
ERICSSON PPP PPP PP YYWW BBBBB LLLLL M
Loading...