Ericsson 688 User Manual
Not for commercial use
Ericsson
Dual Band, Dual Mode Digital Telephone
User's Manual
AE/ LZT 123 3960 R3
Not for commercial use
About This Manual
Important Safety Information provides
guidelines for the safe use of your phone and
accessories.
Guidelines for Safe and Efficient Use
describes important information for using your
phone.
Battery Information contains useful
information about rechargeable batteries.
Getting Started tells you what you need to
know to get your phone out of the box and ready
to make calls.
Learning About Your Phone describes the
parts of your phone to help you get familiar
with its operation.
Basic Operations gets you started using your
phone by describing operations such as placing
calls, answering calls, speed dialing, volume
control, and microphone muting during a call.
Using Menus describes how to access and
navigate through menus.
Message Services describes how to use the text
message and voice mail features of your phone.
Menu Descriptions describes the menus and
settings available on your phone.
Problems You Can Solve is a troubleshooting
guide for you to use if you have problems with
your phone.
The following descriptions will help you
understand the information presented in this
manual:
Key names are shown in bold type (C, for
example) or as a key symbol (S, for
example).
Any alphanumeric characters that represent
something shown on the phone display are
shown in a typeface similar to the characters
used in the phone display (
example).
Hint arrows point to tips and
information about using your
phone.
Dialing, for
Storing and Recalling Numbers describes
how to use the memory features of your phone.
Illustrations of phone displays shown in this
manual are examples that approximate what is
actually shown in the phone display. What is
actually shown in your phone display may
sometimes vary slightly from what is shown in
the illustrations.
Not for commercial use
Table of Contents
Table of Contents
Important Safety Information.................. - i
Warranty Notification............................... - i
Guidelines for Safe and Efficient Use .... - ii
Exposure to Radio Frequency Signals....... - ii
Antenna Care............................................. - ii
Phone Operation........................................ - ii
Driving........................................................ - ii
Electronic Devices...................................... - iii
Posted Facilities......................................... - iii
Blasting Areas............................................ - iii
Potentially Explosive Atmospheres............ - iii
Aircraft........................................................ - iii
Vehicles...................................................... - iii
Battery Information.................................. - iv
New Batteries............................................. - iv
Recycling Your Battery............................... - iv
Battery Use and Care ................................ - iv
Battery Life/Scanning................................. - iv
Getting Started......................................... - 1
Attaching the Antenna................................ - 1
Attaching the Belt Clip to the Battery ......... - 1
Attaching the Battery to Your Phone.......... - 1
Charging the Battery.................................. - 1
Learning About Your Phone.................... - 4
Display Indicators....................................... - 5
Indicator Light Functions............................ - 5
Accessing Your Native Language .............. - 5
Key Functions ............................................ - 5
Descriptions of Phone Models ................... - 6
Basic Operations ..................................... - 7
Turning Your Phone ON ............................. - 7
Turning Your Phone OFF............................ - 7
Making a Call ............................................. - 7
Automatic Redial........................................ - 7
Answering a Call ........................................ - 7
Temporarily Muting the Ring Tone.............. - 7
Increasing or Decreasing Earpiece Volume
During a Call .............................................. - 7
Muting the Microphone During a Call......... - 7
Call Waiting................................................ - 8
Unanswered Calls...................................... - 8
Redialing the Last Number You Called ...... - 8
Super Dial .................................................. - 8
Speed Dial ................................................. - 8
Stop and Pause Dialing.............................. - 8
Emergency Calls........................................ - 9
International Calls ...................................... - 9
Caller Number Identification....................... - 9
Low Battery Power Alert............................. - 9
Security Code ............................................ - 9
Display Messages...................................... - 9
Summary of Basic Operations ................... - 10
Using Menus............................................. - 11
Opening Menus.......................................... - 11
Changing Settings...................................... - 11
Exiting Menu Mode .................................... - 11
Quickly Accessing Menus ......................... - 11
Examples of Using Menus ......................... - 12
Menu Overview.......................................... - 13
Storing and Recalling Numbers.............. - 14
Storing a Number and Name in Memory ... - 14
Specifying a Memory Location................... - 15
Storing a Number in Secure Memory......... - 15
Recalling a Number Using ë .................... - 15
Recalling Previously Dialed Numbers........ - 15
Recalling a Number Using the
Memory Menu............................................ - 15
Recalling a Number From Secure
Memory...................................................... - 15
Altering a Number in Memory .................... - 16
Erasing a Number From Memory............... - 16
Message Services.................................... - 17
Text Message Service................................ - 17
Voice Mail Service...................................... - 19
Quick Access to Text and Voice Mail
Messages................................................... - 20
Not for commercial use
Table of Contents
Menu Descriptions................................... - 21
Memory Menu............................................ - 21
Store Mem ................................................. - 21
RCL Mem................................................... - 21
StoreScrpd................................................. - 21
RCL ScrPad............................................... - 21
RCL LastNo ............................................... - 21
MemoryUsed.............................................. - 21
Messages Menu........................................ - 21
UnreadText................................................. - 21
Old Text...................................................... - 21
Delete All.................................................... - 21
VoiceMsgs1................................................ - 21
VoiceMsgs2................................................ - 21
System Options Menu ............................. - 22
Sys Select.................................................. - 22
Home Only................................................. - 22
Phone No................................................... - 22
SystemInfo................................................. - 22
Privacy ....................................................... - 22
Time/Date .................................................. - 22
General Setup Menu ................................ - 23
KeypadLock................................................ - 23
Back Light .................................................. - 23
Contrast...................................................... - 23
Greeting ..................................................... - 23
Language................................................... - 23
Accessing Your Native Language .............. - 23
Menu Reset................................................ - 23
Call Setup Menu....................................... - 24
Super Dial .................................................. - 24
Speed Dial ................................................. - 24
Answer Opt ................................................ - 24
Call Timer................................................... - 24
Minute Mind................................................ - 24
Auto Area ................................................... - 24
Auto Prefix.................................................. - 24
Auto Retry.................................................. - 24
Tone Send.................................................. - 24
Access Tone............................................... - 24
Sounds Menu............................................ - 25
SilentMode................................................. - 25
Msg Tone ................................................... - 25
Key Sound.................................................. - 25
Key Volume ................................................ - 25
Ear Volume................................................. - 25
SpeakerVol................................................. - 25
Ring Pulse.................................................. - 25
Ring Pitch................................................... - 25
Ring Volume............................................... - 25
Call Data Menu ......................................... - 26
ReceiveLog................................................ - 26
Last Time ................................................... - 26
Elapsed...................................................... - 26
Call Count .................................................. - 26
Time Count ................................................ - 26
Locks Menu .............................................. - 27
Auto Lock ................................................... - 27
Dialing........................................................ - 27
Call Cards .................................................. - 27
Receiving ................................................... - 27
Sec. Code .................................................. - 27
Call Cards Menu....................................... - 28
Calling Card Setup..................................... - 28
Changing the Flow Order........................... - 28
Selecting a Calling Card ............................ - 28
Using a Calling Card.................................. - 28
Problems You Can Solve......................... - 29
Problems and Possible Solutions............... - 29
Displayed Messages and Explanations ..... - 29
Not for commercial use
Important Safety Information
Important Safety Information
Some of the following information may not
apply to your particular product. However, as
with any electronic product, you should observe
safety precautions when you use this product.
• Save this manual—it contains important
safety information and operating
instructions.
• Before using the product, please follow and
adhere to all warnings, safety and operating
instructions located on the product and in
this User's Manual.
• Do Not expose the product to water or
moisture.
• Do Not expose the product to extreme hot
or cold temperatures.
• Do Not expose the product to open flames.
• Do Not allow objects to fall on, or liquids to
spill on the product.
• Use only Ericsson Original Accessories.
Damage from use of non-approved
accessories will void your phone warranty.
• Connect the AC adapter only to designated
power sources as marked on the product.
• To reduce the risk of damage, remove the
electrical cord from an outlet by pulling the
AC adapter rather than the cord.
• Make sure the electric cord is located so that it
will not be subjected to damage.
• To reduce the risk of electric shock, unplug the
product from the power source before
attempting any cleaning. Once unplugged, use
a soft cloth dampened with water.
• DANGER – Never alter the AC cord or plug. If
the plug will not fit into the outlet, have a proper
outlet installed by a qualified electrician.
Improper connection can result in electric shock.
• Do Not attempt to disassemble the
product—doing so will void the warranty.
This product does not contain consumerserviceable components. Service should be
performed only by Authorized Service Centers.
• Do Not remove the antenna. A detached
antenna may be a choking hazard for children.
• Do Not allow battery to be placed in the
mouth. Electrolytes could release and may be
toxic if swallowed.
Warranty Notification
Do not tamper with the Warranty Seal on
the back of your phone. Tampering with
this seal can void your warranty. Do not
attempt to take your phone apart. Doing
so will void your warranty. Your phone
does not contain consumer-serviceable
components. Service should only be
performed by Authorized Service Centers.
Only original Ericsson branded accessories
are engineered for guaranteed compatibility
with your Ericsson mobile phone. Use of any
other accessories may void your phone
warranty.
i
Not for commercial use
Important Safety Information
Guidelines for Safe and Efficient Use
Important: Read This Information Before
Using Your Handheld Portable Telephone
Your handheld portable telephone lets you stay
in touch with your office, your home, emergency
services, and many other places while you
travel. For safe and efficient operation of your
phone, observe the guidelines in this manual.
Your telephone is a radio transmitter and
receiver. When it is ON, it receives and sends
out radio frequency (RF) energy. The phone
operates in the frequency ranges of 824 MHz to
894 MHz and 1850 MHz to 1990 MHz,
employing commonly used frequency
modulation (FM) techniques. When you use
your phone, the wireless system handling your
call controls the power level at which your
phone transmits.
Exposure to Radio Frequency Signals
Your wireless handheld portable telephone is a
low power radio transmitter and receiver. When
it is ON, it receives and also sends out radio
frequency (RF) signals.
In August, 1996, the Federal Communications
Commission (FCC) adopted RF exposure
guidelines with safety levels for handheld
wireless phones. Those guidelines are consistent
with the safety standards previously set by both
U.S. and international standards bodies:
• ANSI C95.1 (1992)*
• NCRP Report 86 (1986)*
• ICNIRP (1996)*
Those standards were based on comprehensive
and periodic evaluations of the relevant
scientific literature. For example, over 120
scientists, engineers, and physicians from
universities, government health agencies, and
industry reviewed the available body of
research to develop the ANSI Standard (C95.1).
The design of your phone complies with the
FCC guidelines (and those standards).
*American National Standards Institute; National Council on
Radiation Protection and Measurements; International
Commission on Non-Ionizing Radiation Protection
Antenna Care
Use only the supplied antenna or an approved
replacement antenna. Unauthorized antennas,
modifications, or attachments could damage the
phone and may violate FCC regulations.
Phone Operation
Normal Position
Hold the phone as you would
any other telephone, with the
antenna pointed up and over
your shoulder.
Tips on Efficient Operation
For your phone to operate most efficiently, do not
touch the antenna unnecessarily when the phone
is in use. Contact with the antenna affects call
quality and may cause the phone to operate at a
higher power level than otherwise needed.
Driving
Check the laws and regulations on the use of
wireless telephones in the areas where you drive.
Always obey them. Also, if using your phone
while driving, please:
• Get to know your wireless phone and its
features such as speed dial and redial.
• When available, use a handsfree device.
• Position your wireless phone within easy
reach.
• Suspend conversations during hazardous
driving conditions or situations.
• Do not take notes or look up phone numbers
while driving.
• Dial sensibly and assess the traffic; if possible,
place calls when you are not moving or before
pulling into traffic.
• Do not engage in stressful or emotional
conversations that may be distracting.
• Use your wireless phone to call for help.
• Use your wireless phone to help others in
emergencies.
• Call roadside assistance or a special wireless
non-emergency assistance number when
necessary.
ii
Not for commercial use
Important Safety Information
• Give full attention to driving.
• Pull off the road and park before making or
answering a call if driving conditions so
require.
Electronic Devices
Most modern electronic equipment is shielded
from RF signals. However, certain electronic
equipment may not be shielded against the RF
signals from your wireless phone.
Pacemak ers
The Health Industry Manufacturers Association
recommends that a minimum separation of six
inches (6") be maintained between a handheld
wireless phone and a pacemaker to avoid
potential interference with the pacemaker.
These recommendations are consistent with the
independent research by and recommendations
of Wireless Technology Research.
Persons with pacemakers:
• Should ALWAYS keep the phone more than
six inches from their pacemaker when the
phone is turned ON.
• Should not carry the phone in a breast
pocket.
• Should use the ear opposite the pacemaker
to minimize the potential for interference.
• Should turn the phone OFF immediately if
they have any reason to suspect that
interference is taking place.
Hearing Aids
Some digital wireless phones may interfere with
some hearing aids. In the event of such
interference, you may want to consult your
service provider (or call the customer service
line to discuss alternatives).
Other Medical Devices
If you use any other personal medical device,
consult the manufacturer of your device to
determine if they are adequately shielded from
external RF energy. Your physician may be able
to assist you in obtaining this information.
Turn your phone OFF in health care facilities
when any regulations posted in these areas
instruct you to do so. Hospitals or health care
facilities may be using equipment that could be
sensitive to external RF energy.
Posted Facilities
Turn your phone OFF in any facility where posted
notices so require.
Blasting Areas
To avoid interfering with blasting operations, turn
your phone OFF when in a “blasting area” or in
areas posted “turn off two-way radio.” Obey all
signs and instructions.
Potentiall y Explosive Atmospheres
Turn your phone OFF when in any area with a
potentially explosive atmosphere and obey all
signs and instructions. Sparks in such areas could
cause an explosion or fire resulting in bodily
injury or even death.
Areas with a potentially explosive atmosphere are
often, but not always, clearly marked. They
include fueling areas such as gasoline stations;
below deck on boats; fuel or chemical transfer or
storage facilities; vehicles using liquefied
petroleum gas (such as propane or butane); areas
where the air contains chemicals or particles, such
as grain, dust, or metal powders; and any other
area where you would normally be advised to turn
off your vehicle engine.
Aircraft
FCC regulations prohibit using your phone while
in the air. Turn your phone OFF before boarding
an aircraft.
V ehic les
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle. You should
also consult the manufacturer of any equipment
that has been added to your vehicle.
Vehicles Equipped with an Air Bag
An air bag inflates with great force. DO NOT
place objects, including both installed or portable
wireless equipment, in the area over the air bag or
in the air bag deployment area. If in-vehicle
wireless equipment is improperly installed and
the air bag inflates, serious injury could result.
iii
Not for commercial use
Important Safety Information
Battery Information
New Batteries
The battery packaged with your phone is
not fully charged. To get maximum battery
capacity, you can use a multicharger to
condition the battery. To condition the battery,
you first charge it, and then you fully discharge
it, three times in succession. See Conditioning
a Battery on page 3.
Recycling Your Battery
Your phone manufacturer is a member of the
Rechargeable Battery Recycling Corporation
(RBRC), a non-profit public service organization
designed to assist in the recycling of
rechargeable NiCd batteries. Many areas
require the recycling of these types of batteries.
In the U.S., call 1-800-822-8837 to find out how
to recycle your battery. Outside the U.S.,
contact your local retailer for recycling
instructions.
Battery Use and Care
A rechargeable battery has a long service life if
treated properly. A new battery, or one that
has not been used for a long period of time,
should be conditioned, as described above,
before using your phone. If a multicharger was
packaged with your phone, the multicharger
has a battery conditioning function.
Avoid recharging a fully-charged or almost
fully-charged battery. This can result in the
memory effect, which causes the battery to
charge to less than its full capacity. If your
phone shuts off due to low battery power,
charge the battery within 24 hours for the
battery to reach full capacity.
• Do not leave your battery where it could be
subjected to extremely hot or cold
temperatures. This could reduce the battery's
capacity.
• Never let the metal contacts on the battery
touch another metal object. This could shortcircuit and damage the battery.
• Do not attempt to take a battery apart.
• Do not expose a battery to open flame. This
could cause the battery to explode.
• Turn your phone OFF before removing the
battery.
• Use only the AC/DC adapter supplied with
your battery charger. Using a different
adapter could be dangerous and will void your
phone warranty.
• Never charge a battery when the ambient
room temperature is below 50° F (10° C) or
above 105° F (40° C).
• Do not allow the battery to be placed into the
mouth. Battery electrolytes may be toxic if
swallowed.
Battery Life/Scanning
When your phone cannot locate your home calling
area or anther acceptable coverage provider, it
will display Scanning. This means the phone is
continuously searching for a channel to provide
service. You need to be aware that scanning uses
more battery life than normal operation of your
phone. Your phone’s battery life will be depleted
more quickly than normal if your phone
frequently performs the scanning function.
iv
Not for commercial use
Getting Started
Complete the following steps after you have
removed your phone and its components from
the box:
1. Attach the antenna to the phone.
2. Attach the belt clip to your battery. (This
step is optional. Also note that the belt clip
cannot be used with the ultra-slim battery.)
3. Attach the battery to your phone.
4. Before using your phone, fully charge the
battery using the charger provided with your
phone.
Attaching the Antenna
1. Insert the gold pin on the end of the antenna
into the antenna connector located on the top of
the phone, as shown in the illustration.
Getting Started
performance, do not frequently remove and
replace the antenna.
Attaching the Belt Clip to the Battery
DO NOT try to remove the belt clip after you
have attached it to a battery. Trying to remove
the belt clip could damage the battery case.
Using the belt clip is optional. A belt clip
cannot be used with an ultra-slim battery.
Insert the flat tab on the belt clip into the slot
in the battery case as shown in this illustration.
You should hear the belt clip click when it locks
in place.
Attaching the Battery to Your Phone
Attach the battery to your phone as shown in
the following illustration.
Removing the battery is the reverse of attaching
it to the phone.
12 3
Charging the Battery
Your phone is packaged with one of the
following battery chargers:
• A rapid charger
• An overnight charger
• A travel charger
2. Press the pin into the connector and rotate
the antenna until the antenna clicks and locks
in place. There should be no gap between the
antenna and the connector on the phone, and
you should not be able to easily rotate the
antenna after it locks in place. For best
• A multicharger
To charge your battery, follow the steps on the
next page for the charger included with your
phone. The label on the box in which your phone
was packaged identifies the charger and battery
included in the package. You should fully
1
Not for commercial use
Getting Started
charge the battery before you attempt to use
your phone.
NEVER attach the charger to a phone that
does not have a battery installed.
Rapid Charger
The rapid charger supplies power to charge
your battery while the battery is attached to
your phone. You can make and receive calls
while using the rapid charger, if you wish. To
charge your battery with the rapid charger:
1. Plug the charger into a standard wall
electrical outlet.
2. Hold the phone with the display and keypad
up.
3. Hold the small plug on the charger cord so
the lightning bolt symbol is up.
4. Align the small plug on the charger cord
with the connector on the bottom of your phone.
The connector on the phone is above the
lightning bolt symbol.
The connector on the phone is above the
lightning bolt symbol.
5. Press the plug into the connector until the
plug "snaps" into place.
Travel Charger
The travel charger supplies power to charge
your battery while the battery is attached to
your phone. You can make and receive calls
while using the travel charger, if you wish. To
charge your battery with the travel charger:
1. Using the appropriate cord supplied with the
charger, attach the phone to the charger, as
shown in the following illustration.
5. Press the plug into the connector until the
plug "snaps" into place.
Overnight Charger
The overnight charger supplies power to charge
your battery while the battery is attached to
your phone. To charge your battery with the
overnight charger:
1. Plug the charger into a standard wall
electrical outlet.
2. Hold the phone with the display and keypad
up.
3. Hold the small plug on the charger cord so
the lightning bolt symbol is up.
4. Align the small plug on the charger cord
with the connector on the bottom of your phone.
2
2. Using the other cord supplied, plug the
charger into a standard electrical wall outlet.
Multicharger
The multicharger can charge a battery attached
to your phone (standing in the front
compartment of the charger) and a separate
battery (in the rear compartment of the
charger). The multicharger can also condition a
battery by discharging the battery completely
before beginning the charging cycle. The
Not for commercial use
Getting Started
charger can charge both NiMH and NiCd
batteries.
Charging a Battery Attached to Your
Phone
You can make and receive calls while using the
multicharger to charge a battery attached to
your phone, if you wish.
1. Using the lightning bolt symbols as your
guide, align the small plug on the charger cord
with the receptacle on the back of the charger.
2. Plug the connector on the charger cord into
the receptacle on the back of the multicharger.
3. Plug the AC adapter on the power cord into a
wall outlet.
4. Insert your phone into the front
compartment of the multicharger, as shown in
the following illustration.
The light on the left front corner of the
multicharger comes on red when the phone is
properly seated in the multicharger, and the
phone's display indicates that the battery is
charging.
5. Remove your phone from the multicharger
when the light turns green, which indicates that
the battery attached to your phone is fully
charged.
NOTE: When the phone is attached to the
charger, the phone backlight will turn off as
soon as a call is received. This enhances phone
and battery performance.
Charging a Separate Battery
1. Using the lightning bolt symbols as your
guide, align the small plug on the charger cord
with the receptacle on the back of the charger.
2. Plug the connector on the charger cord into
the receptacle on the back of the multicharger.
3. Plug the AC adapter on the power cord into a
wall outlet.
4. Insert the battery into the rear compartment
of the multicharger.
The multicharger's rear indicator light comes on
red when the battery is properly seated in the
rear compartment.
5. Remove the battery from the multicharger
when the rear indicator light turns green, which
indicates that the battery is fully charged.
NOTE: You can charge two batteries—one
attached to your phone and one in the rear
compartment—at the same time.
Conditioning a Battery (Rear Slot Only)
The multicharger can condition a battery by
fully discharging the battery and then charging
the battery to full capacity. Conditioning helps
prevent the memory effect that can result from
repeatedly charging a battery before the battery
is fully discharged.
1. Using the lightning bolt symbols as your
guide, align the small plug on the charger cord
with the receptacle on the back of the
multicharger.
2. Plug the connector on the charger cord into
the receptacle on the back of the multicharger.
3. Plug the AC adapter on the power cord into a
wall outlet.
4. Insert the battery into the rear compartment
of the multicharger.
5. Press the light on the left rear side of the
multicharger. The light remains a solid yellow
while the multicharger discharges the battery.
It can take anywhere from two to six hours to
discharge the battery, depending on the battery
type.
The light turns a solid red when the
multicharger begins charging the battery.
6. Remove the battery from the multicharger
when the light turns green, which indicates that
the battery is fully charged.
3
Not for commercial use
Learning About Your Phone
Learning About Your Phone
Your digital wireless phone is similar in appearance to one of the illustrations below.
KH 618
KH 668
4
KF 688
Not for commercial use
Learning About Your Phone
Accessing Y our Native Language
• Press î 4 5 to access the Languages
1
4
2
5
3
7
6
submenu.
• Enter your security code at the prompt
(default is 0000).
• Use î or ë to scroll through the list of
available languages until the
cursor (R) is next to the appropriate
language.
• Press Y to store your selection.
• Press C to exit menu mode.
The display shown above represents the
standby display.
Display Indicators
1. Voice Mail Icon indicates that you have
voice mail that you have not retrieved. The
number indicates the number of messages.
2. Service Provider shows the name of your
service provider.
3. Text Message Icon indicates that you have
text messages that you have not retrieved. The
number indicates the number of messages. An
F indicates that text message memory is full.
4. Signal Strength Indicator shows the
relative signal strength from the system. More
bars indicate a stronger signal.
5. Mode Indicator shows whether your phone
is operating in Digital(
Private(
6. Status Indicator shows the operating status
of your phone. For example,
during a call.
7. Battery Strength Icon shows the relative
strength of your battery. A full icon indicates a
fully-charged battery.
P) mode.
Indicator Light Functions
The color and state of the indicator light on top
of your phone indicates the following conditions:
Slow Flashing Green: Phone is in standby.
Rapid Flashing Green: Phone is receiving a
call.
Steady Green: Phone is receiving power from
an external source, such as a travel charger.
Flashing Red: Low battery power alert.
D), Analog(A), or
InUse is shown
Key Functions
YES
• Press to place a call.
• Press to answer a call.
• Press to store menu settings.
• Press and hold (after entering a
number) to make a calling card call.
• Press and hold (during a call) to
send displayed numbers as tones.
• Press during a call to switch
between calls (call waiting or threeway calling features must be
activated by your service provider).
NO/ON/OFF
• Press and hold to turn your phone
ON or OFF.
• Press to end a call.
• Press to exit a menu without saving
changes made in the menu.
• Press to temporarily mute the
ringer when receiving a call.
Up Arrow
• Press to recall numbers stored in
memory, when your phone is in
standby mode.
• Press twice to recall the last
number called, when your phone is
in standby mode.
• Press to scroll through menus and
menu setting selections when your
phone is in menu mode, or to scroll
through stored numbers.
• Press to scroll through messages.
• Press and hold to go up through a
message, one screen at a time.
• Press to increase the earphone
volume during a call.
5
Loading...