StyleView powered carts provide electrical AC power for
mobile point of care computing equipment in a healthcare
environment. The carts are not intended to power medical
products or devices. Outlets are provided to power
information technology equipment only such as computer
equipment and computer peripherals.
User Guide
StyleView® SV44 Cart
with LCD Mount
Features & Speci cations ............................................... 3 - 6
For Warranty visit: www.ergotron.com/warranty
For Service visit: www.ergotron.com
For local customer care phone numbers visit: http://contact.ergotron.com
For the latest User Installation Guide and StyleLink Software Download please visit: www.ergotron.com
User's Guide - English
Guía del usuario - Español
Manuel de l’utilisateur - Français
Gebruikersgids - Deutsch
Benutzerhandbuch - Nederlands
Guida per l’utente - Italiano
Användarhandbok - svenska
ユーザーガイド:日本語
用户指南 : 汉语
888-24-302-G-01 rev. D • 09/15
Includes
Constant Force™
Technology
1/27
WARNING
LEAD
AVERTISSEMENT
14mm (9/16”)
BATTERY
29 °C
10 °C
50 °F
IMPACT HAZARD!
MOVING PARTS CAN CRUSH AND CUT.
Failure to heed this warning may result in serious personal
LES PARTIES EN MOUVEMENT PEUVENT ÉCRASER ET COUPER.
Il existe un risque de blessure corporelle ou d’endommagement
matériel en cas de non respect de cet avertissement.
Minimisez la tension d’élévation AVANT:
de retirer l’équipement xé, d’expédier le chariot, de stocker le chariot
www.ergotron.com
826-501
IMPORTANT! This product will need tension adjustments once installation is complete. Make sure all equipment is properly installed on the product before
attempting range of motion or tension adjustments. Any time equipment is added or changed on this product resulting in a di erent mounted weight, you
should repeat the adjustment steps to ensure safe and optimum operation. This product should move smoothly and easily through the full range of motion and
stay where you set it. If movement is di cult or the product does not stay where you set it, follow the adjustment instructions to loosen or tighten the tension
to create a smooth, easy motion. Depending on your product and the adjustment, it may take many turns to notice a di erence.
Humidity
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
FCC Compliance Statement
The cart has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense.
Changes or modi cations not expressly approved by Ergotron, Inc. could void the user’s authority to operate the
equipment.
Please contact Ergotron for complete EMC compatibility information.
86 °F
Relative
5-95% rH
Range
OperationalStorage
-20 °C
- 4 °F
Humidity
Relative
Range
50 °C
122 °F
5-95% rH
CAUTION: Close worksurface before opening drawers. Open only
one drawer at a time. Do Not push cart when drawers or worksurface
are open. Failure to follow these instructions may cause the cart to
be unstable.
Components
ENGLISH
1x
1
2
1x
1x
3
4x
4
5
1x
1x
6
AB
4x
3x
12x
1x
2x
1x
M4 x 10mm
1x
2x
8x
M4 x 10mm
1x
1x
M4 x 8mm
M4 x 8mm
1x
1x
M4 x 5mm
Tools Needed
10mm
14mm (9/16")
2/27
1x1x
7
8
1x
3mm
4x
1x
2x
M4 x 12mm
888-24-302-G-01 rev. D • 09/15
Features & Speci cations
2
5
9
4/11
17
13
1.
Height Adjustable LCD Mount attaches LCDs or tablet PC's with 75x75 or 100x100mm mounting
interface
2.
Worksurface 2a. Worksurface Lock and Release
3.
User Interface for Power System
4.
Secure Storage for Laptop, Thin Client or CPU
5.
Front Handle
6.
Height Adjustment Brake Handle
7.
USB Hub connects keyboard and mouse USB cables
8.
Keyboard tray slides out, tilts and allows for right or left mousing with attached mouse holder
9.
Keyboard Light under Front Handle
10.
Keyboard Light Switch
11.
Cable Management and Storage for excess cables and power supplies
12.
Storage Basket and Rear Handle
13.
Front Locking Casters
14.
Quick Reference Card
15.
Power Cord Hooks
16.
Scanner Holder
17.
Antimicrobial worksurface and antimicrobial coating on wrist rest
18.
Auto-Lock Drawer (see page 3 for drawer con gurations)
19.
Power System
The StyleView AC Power System allows your power supply to travel with the cart. The Power System is
integrated in the base of the cart and comes standard with 2 batteries, power module, User Interface (UI), outlet
box and power cord.
• User Interface (UI): Allows power system output to be turned on or turned o , monitors battery charge
remaining, and provides low battery charge audible alarm.
• Two 33 Ah Sealed Lead Acid, Absorbed Glass Mat, 12VDC batteries.
• The minimum operational temperature is 10°C (50°F) and the maximum operational temperature is 29°C (86°F). The
recommended humidity range for operation is 5-95% rH.
• The recommended cart storage temperature is 15°C (59°F). At this temperature, the battery’s age-related
capacity loss is minimized. The minimum storage temperature is -20°C (-4°F) and the maximum storage
temperature is 50°C (122°F). The recommended humidity range for storage is 5-95% rH.
CAUTION: DO NOT EXCEED MAXIMUM
LISTED WEIGHT CAPACITY. SERIOUS INJURY
OR PROPERTY DAMAGE MAY OCCUR!
<13 lbs (5.9 kg)
*Combined LCD and CPU Compartment weight:
CAUTION:
If the combined LCD and CPU weight is greater than 27 lbs (12.2 kg) then the CPU must be
mounted to the rear of the cart using the Universal CPU Holder accessory (ordered separately).
2.5"
(64 mm)
6.3"
160 mm)
With Independent LCD Lift:
6-14 lbs (2.7-6.4 kg)
0 lbs (0 kg)
<5 lbs (2.3 kg)
Open Worksurface
Closed Worksurface
CPU Compartment
<27 lbs (12.2 kg).
10.5"
(267 mm)
12.5"
(315 mm)
Without Independent LCD Lift:
20 lbs (9 kg)*
* See "How To Eliminate Independent LCD
Lift" section
<2 lbs (0.9 kg)
see inset, below
Total weight capacity per drawer.
< 2 lbs (1 kg)
ENGLISH
2.5"
(64 mm)
6.3"
160 mm)
2.5"
(64 mm)
10.5"
(267 mm)
10.5"
(267 mm)
Total weight capacity per drawer.
< 1 lbs (0.5 kg)
6"
152 mm)
Total weight capacity per drawer.
<0.25 lbs (0.1 kg)
When guring dimensions, include
mounted accessories, protruding cables
and port replicators or docking stations.
(216 mm)
1.75" (44 mm)
17"
(432 mm)
8.5"
2.5"
(64mm)
23" - 43"
(584-1092 mm)
4"
(102 mm)
Front View
< 14.75" (375 mm)**
Side View
31" - 51"
(787-1295 mm)
*
< 4" (102 mm)
< 12.25"
(311 mm)
< 12.25"
(311 mm)
< 13"
(330 mm)
15.4"
(390 mm)
17.5"
(445 mm)
15.5"
(394 mm)
18.3"
(465 mm)
< 1.38"
(35 mm)
< 2.3"
(58 mm)
3.27"
(83 mm)
7.4"
(188 mm)
3.7"
(95 mm)
**< 4"
(102 mm)
**< 8"
(203 mm)
**< 2.75"
(70 mm)
Top View
3.4"
(86 mm)
19.75"
(502 mm)
< 2.75" (70 mm)
(340 mm)
2.9" (74 mm)
22.38"
(568 mm)
*< 17.63"
(448 mm)
*< 21.75"
(552 mm)
*< 17.75"
(451 mm)
13.4"
31"
(787 mm)
**< 2.75"
(70 mm)
**< 7.75"
(197 mm)
**< 4.25"
(108 mm)
6/27
888-24-302-G-01 rev. D • 09/15
Set-up
1
Release Brake to move riser.
CAUTION! Completely release brake
engagement before raising or lowering
the cart. Raising or lowering the cart with
the brake partially engaged may cause
product damage.
2
1x
ENGLISH
a
1x
b
1x
888-24-302-G-01 rev. D • 09/15
1x
7/27
Set-up
c
1x
ENGLISH
3
ab
c
Connect Keyboard and Mouse to USB Hub
USB (Type A)
USB (Type A)
8/27
NOTE: Bar Code Scanner should be connected directly to
computer USB port.
DO NOT connect Bar Code Scanner to the USB Hub.
888-24-302-G-01 rev. D • 09/15
Set-up
75x75mm / 100x100mm
b
4
a
0˚
0˚
1x
M4 x 5mm
9 Drawers
4x
For 9 drawer carts only:
After installing the monitor, remove and save the shipping screw.
M4 x 10mm
WARNING
AVERTISSEMENT
1.
2.
3.
IMPACT HAZARD!
MOVING PARTS CAN CRUSH AND CUT.
Failure to heed this warning may result in serious personal
Raise monitor to top of vertical adjustment BEFORE removing.
DO NOT remove Stop Screw without monitor attached. Doing so will
cause monitor pivot to shoot up rapidly and may cause personal injury.
LES PARTIES EN MOUVEMENT PEUVENT ÉCRASER ET COUPER.
Il existe un risque de blessure corporelle ou d’endommagement
Élevez l’écran au plus haut de l’ajustement vertical AVANT de le retirer.
NE retirez PAS la vis d’arrêt avant que l’écran soit xé.
Dans un tel cas, le pivot d'écran se relèverait rapidement et cela pourrait
engendrer des blessures.
www.ergotron.com
injury or property damage!
DANGER D’IMPACT!
matériel en cas de non respect de cet avertissement.
826-502
ENGLISH
To increase space and improve air ow, power brick may be stored under the storage area.
1x
2x
M4 x 12mm
b
2x
a
888-24-302-G-01 rev. D • 09/15
c
9/27
Loading...
+ 18 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.