Ergotron QES1500 User Manual

Page 1
FX30 Quick Release
Wall Mount Kit for
Flat Panel TV/Monitor
USA 1-800-888-8458
Europe +31 20 312.29.39
12
1
M4 x 10 mm
#8-32
75-100mm
M4 x 10 mm
3/32"
(2.38mm)
+
M4 x 20 mm
2
1
a
b
888-60-055-02 rev. D • 5/04
1 of 4
Page 2
2
Wall bracket mount
WARNING: Because vertical surfaces vary widely and the ultimate mounting method is out of Ergotron's control, it is imperative that you consult with
!
appropriate engineering, architectural or construction personnel to ensure that the FX is mounted properly to handle applied loads.
a
c
b
2
1
4"
101.6 mm
NOTE:
Consult a qualifi ed construction professional to determine the appropriate type and quantity of mounting fasteners required for your application.
Fasteners are not supplied.
3
2 of 4
Monitor bracket mount
a 75mm b 100mm c Xmm
888-60-055-02 rev. D • 5/04
Page 3
100mm
100mm
!
!
!
a 75mm
3
WARNING: To avoid damage to your monitor, if your monitor requires a screw size other than the M4 screws and knobs provided in this kit, use the screw size recommended by the monitor manufacturer!
75mm
75mm
75mm
4x
M4x10mm M4x10mm
or
4x
CAUTION: Use the 4M x 20mm screws only with the stand-offs. If used alone, severe damage to your monitor may occur.
75mm
M4 x 20 mm
b 100mm
3
100mm
100
4x
#8-32 x 3/16"
B
mm
888-60-055-02 rev. D • 5/04
4x
M4x10mm M4x10mm
4x
or
M4 x 20 mm
CAUTION: Use the 4M x 20mm screws only with the stand-offs. If used alone, severe damage to your monitor may occur.
3 of 4
Page 4
4
Attachment
a
bb
ab
c
Removal
c
90°
90°
4 of 4
© 2004 Ergotron, Inc. All rights reserved.
Patents Pending and Patented U.S. & Foreign. Ergotron is a registered trademark of Ergotron, Inc. Reproduction of this material in whole or part for any purpose other than that authorized by Ergotron, Inc. is prohibited.
888-60-055-02 rev. D • 5/04
Loading...