Page 1
™
LearnFit
< 15lbs. (6.8kg)
CAUTION: DO NOT EXCEED
16"406mm
MAXIMUM LISTED WEIGHT
CAPACITY. SERIOUS INJURY
OR PROPERTY DAMAGE MAY
OCCUR!
User's Guide
For the latest User Installation Guide please visit: www.ergotron.com
English, Español, Français, Deutsch, Nederlands, Italiano, Svenska, 日本語, 汉语
www.ergotron.com |
888-24-328-G-00 rev. F • 12/18
USA: 1-800-888-8458
|
Europe: +31 (0)33-45 45 600
|
China: 400-120-3051
|
English
Japan: japansupport@ergotron.com
1 of 7
Page 2
Components
ABC
1x
1
1x 1x
Tools Needed
2 of 7
888-24-328-G-00 rev. F • 12/18
Page 3
1
3°- 7°
Remove base orientation
indicator from base.
Back
Front
Front
2
Partially insert riser into base.
a
Rock riser from
side to side while
inserting.
b
< 10lbs. (4.5kg)
c
Indicator arrows will
remain visible.
888-24-328-G-00 rev. F • 12/18
Front
3 of 7
Page 4
34
Remove cap.
Attach work surface and press down.
5
Indicator arrows should
be completely hidden.
Lift up on the work surface to make sure it is
securely attached to the base.
4 of 7
888-24-328-G-00 rev. F • 12/18
Page 5
Lift brake release lever to raise and
76
lower riser.
8
Loosen, but do not remove 2 screws to lift
and lower hook to desired height.
180˚
888-24-328-G-00 rev. F • 12/18
5 of 7
Page 6
How to Disassemble
To remove worksurface,
push tab with a tool
while removing.
(Hex wrench suggested,
max diameter 4mm)
NOTE: Requires two
people.
Attach cap.
6 of 7
888-24-328-G-00 rev. F • 12/18
Page 7
Set Your Workstation to Work For YOU!
Learn more about ergonomic computer use at:
www.computingcomfort.org
Height Position top of screen slightly below eye level.
Position keyboard at about elbow height with wrists fl at.
Distance Position screen an arm's length from face—at least 20” (508mm).
Position keyboard close enough to create a 90˚ angle in elbow.
Angle Tilt screen to eliminate glare.
Tilt the keyboard back 10° so that your wrists remain fl at.
To Reduce Fatigue
Breathe - Breathe deeply through your nose.
Blink - Blink often to avoid dry eyes.
Break • 2 to 3 minutes every 20 minutes
• 15 to 20 minutes every 2 hours.
For Warranty visit: www.ergotron.com/warranty
For Service visit: www.ergotron.com
For local customer care phone numbers visit: http://contact.ergotron.com
NOTE: When contacting customer
service, reference the serial number.
www.ergotron.com |
© 2016 Ergotron, Inc. All rights reserved. LearnFit™ is a registered trademarks of Ergotron, Inc.
888-24-328-G-00 rev. F • 12/18
USA: 1-800-888-8458
|
Europe: +31 (0)33-45 45 600
|
China: 400-120-3051
|
Japan: japansupport@ergotron.com
7 of 7
Loading...