Equator FR 300 Owner's Manual

Instruction Manual
Upright Freezer
MODEL: HS-111F(N)
1
Dear customer:
Thank you for buying this upright freezer. To ensure that you get the best results from your new freezer, please take time to read through the simple instructions in this booklet.
Please ensure that the packing material is disposed of in accordance with the current environmental requirements.
When disposing of any fridge equipment please contact your local waste disposal department for advice on safe disposal.
This appliance must be only used for its intended purpose.
CHIEF TECHNICAL DATA
MODEL FR 300
Type of preventing form electric shock
I
Climate type ST Total storage volume (L) 85 Rated Voltage(V) 115 Rated Frequency(Hz) 60 Refrigerant (g) R134a 80 Weight (kg) 29KG
Size(width/depth/height):mm ----- Net 508*527*850
Size(width/depth/height):mm ---
-Packing
567*576*865
2
INSTALLING YOUR REFRIGERATOR
User should take out the door handle in the plastic bag, and install it into the door. Then take out the two handle stopples and cover the installed screws with them. The handle stopple and screw stopple in the plastic bag can be used when the user wants the door to be opened from left.
UNPACKING YOUR REFRIGERATOR
WARNING: Use two or more people to move fridge. Failure to do so can result in back or other injury.
· Remove tape and any labels from your fridge before
using(except the rating label). To remove any remaining tape or glue, rub the area briskly with your thumb. Tape or glue residue can also be easily removed by rubbing a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry.
·Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your refrigerator.
·When moving the refrigerator, do not tilt the refrigerator beyond 45°from upright position.
3
Loading...
+ 7 hidden pages