Equator EZ4400NG Installation Manual

Super Combo

Automatic Washer + Sensor Dryer

Model: 4400N

Helpful Hints

Pre-installation

Unpacking leveling

Ventilation

Recessed, Closet, Alcove

Control Panel

Display Panel

Diagnostics Menu

WARRANTY INFORMATION

Your appliance is protected by this warranty under normal, personal, family or household use (1Year),

and limited commercial use (90 days), in USA and Canada.

WARRANTY

Consolidated Brands undertakes to the consumer-owner to repair or, at our option, to replace any part of this product which proves to be defective in workmanship or material under normal personal, family or household use, in the USA and Canada, for a period of one year from the date of original purchase. For commercial use, the product is warranted for a period of 90 days. During this period, we will provide all labor and parts necessary to correct such defect, free of charge, if the appliance has been installed and operated in accordance with the written instruction with the appliance. Ready access to the appliance, for service, is the responsibility of the consumer-owner. We may require return of products or parts to our warranty department for which the shipping charges are to be incurred by the consumer. If a return or replacement is required, allow 3-4 weeks to process. All repairs or replacements are warranted only for the remainder of the original warranty period. Charges may incur if warranty coverage is not applicable. Service would be provided from Monday to Friday between normal business hours.

For Service Contact:

Phone or Text: 1-800-776-3538

EXCLUSIONS

In no event shall Consolidated Brands be liable for incidental or consequential damages or for damages resulting from external causes such as abuse, operation misuse, neglect, alterations, normal wear and tear, incorrect voltage or acts of God. This warranty does not cover service calls which involve defective workmanship, damage due to other products while combined use with this product or materials covered by this warranty. Accordingly, diagnosis and repair costs for a service call which involves defective workmanship or materials will be the responsibility of the consumerowner.

Most work is covered. The deﬁning factor is has the machine malfunctioned (Consolidated Brands is responsible) or has the customer omitted or done something to cause or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

THE FOLLOWING WORK ARE NOT COVERED UNDER WARRANTY:

Installation

1. Non-removal of shipping rods, causing vibration / internal damage.

2. Non-adjustment of feet to level machine, causing vibration / internal damage.

3. Non-removal of exhaust vent plate at the back while using Venting Dry mode, causing excess heat and resulting in damage to internal components.

4. Using incorrect length of venting i.e more than 10 feet unless used with a booster fan

5. Not conforming to minimum space requirements for Built-in installation, causing excess heat and resulting in damage to internal components.

6. Installation in a corrosive environment

7. Incorrect water pressure i.e below 7.25 psi or above 145 psi

8. Incorrect water inlet hose installation (use only factory supplied hoses with metric threads on the L shaped side to ﬁt water valves)

Maintenance

1. Non-cleaning of coin trap for debris, causing the unit to not drain out water and resulting in drain pump malfunction.

2. Non-cleaning of vent fan & exhaust hose for lint, causing the unit to not dry properly.

3. Improper maintenance (such as but not limited to scale build-up, freeze damage, or vent blockage)

Damage

1. Breakage of cosmetic parts eg. Door handle, knob.

Other

1. Accident, abuse or misuse

2. Using of solvents to clean the machine or wash clothes causing damage.

3. Misapplication of this product e.g. Use in a non household/commercial environment.

4. Any other cause not due to defects in materials or workmanship

5. Problems or damage due to ﬁres, ﬂooding, electrical surges, freezing or any acts of God

6. Any damage cause by poor water quality

7. Operating the appliance with anything other than potable water at all times

8. Force majeure

/ 6 kg

7.25-145 (psi) / 0.05-1(Mpa)

33.5x23.6x22 (in) / 85x60x55.8 (cms) 161 lbs / 73 kg

Designs, Speciﬁcations and Manual subject to change without notice

Lint Free Maintenance

Portability Kit (Accessory Part# 1070 sold separately) where needed.

To reduce the risk of ﬁre due to contaminated loads, the ﬁnal part of a tumble dryer cycle occurs

16. without heat (cool down period). Avoid stopping a tumble dryer before the end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated.

The unit must be installed on a strong leveled surface in a protected, dry and well-ventilated area, with a power and water supply of suﬃcient capacity and a suﬃcient outlet in close proximity.

Factory supplied accessories

Blanking Caps

Vent Adapter

+ 19 hidden pages