Equator EZ 4000 CV Owner's Manual

OWNER’S MANUAL
FRONT LOADING
SUPER COMBO
Introduction ………………………………………………………………………….3
Important Safety Instructions ………………………………………………………4
Safety .................................................. ……………………………………………5
Diagram of the Combo …………………………………………………………......6
Installation Instructions ………………………………………………………….....7
Warranty……………………………………………………………………………...1
Electrical ..................... ……………………………………………………………..9
Plumbing ......................... ………………………………………………………….10
Ventilation Instructions
Program Selection Chart ………………………………………………………….15
Operating Instructions ... …………………………………………………………..16
Winterizing your Combo ...……………………………………….……………… 19
Understanding Fabric Care Labels ……………………………………..............19
new Combo Washer-Dryer
Stain Removal Chart .…………………………………………….……………… 21
Maintenance ......………………………………………………….……………… 20
Troubleshooting .………………………………………………….……………… 23
Your appliance is protected by this warranty under
and limited commercial use (90 days),
WARRANTY
Equator Appliances undertakes to the consumer-owner to repair or, at our option, to replace any part of this product which proves to be defective in workmanship or material under normal personal, family or household use, in the USA and Canada, for a period of one year from the date of original purchase. For commercial use, the product is warranted for a period of 90 days. During this period, we will provide all labor and parts necessary to correct such defect, free of charge, if the appliance has been installed and operated in accordance with the written instructions with the appliance. Ready access is the responsibility of the consumer-owner.
EXCLUSIONS
In no event shall Equator Appliances be liable for incidental or consequential damages
or for damages resulting from external causes such as abuse, misuse, incorrect voltage or
acts of God. This warranty does not cover service calls
which do not involve defective
costs for a service call which does not involve defective workmanship or materials will be the responsibility of the consumer-owner.
Specifically, the following work is not covered under warranty and does not constitute warranty work:
Installation – e.g. improper hook-up or leveling or non-removal of shipping rods Maintenance – e.g. cleaning of air and/or water filter Damage – e.g. replacing broken door handle
Most work is covered. The defining factor is, has the machine malfunctioned (Equator
Appliances is responsible) or has the customer omitted or done something to cause
machine to malfunction (customer is responsible). Some States do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
1
WARRANTY INFORMATION
to replace
to the appliance, for service, is
WARRANTY SERVICE
This warranty is given by:
Equator Advanced Appliances 10216 Georgibelle Drive, Suite 900D Houston, TX 77043-5249
For Service:
Call 1-800-776-3538 Email: service@appliancedesk.com
Web: www.ApplianceDesk.com
GENERAL
Since it is responsibility of the consumer-owner to establish the warranty period by verifying the original purchase date, the Equator Advanced Appliances recommends that a receipt, delivery slip or some other appropriate payment record be kept for that purpose. Remember
ts with the
Consolidated Brands. You can also register online by typing the following link
www.ApplianceDesk.com
. This warranty gives you specific legal rights, and y ou may also
have other rights which vary from State to State.
Electrical Testing Laboratories
US N° CANADA
2
Model
EZ 4000 CV
Rated Voltage
240 W Spin input power 450 W Capacity 13 lbs. Spin Speed 1000 rpm Programs 14
0.05-1(Mpa) Dimensions (HxWxD) 33.5 x 23.6 x 22 (inches) Net Weight 161 lbs.
Business hours (9:00 a.m. to 5:00 p.m. weekdays).
All rights reserved. Manual subject to change without notice.
4007606
/60Hz 13A110 -120V
4007606
INTRODUCTION
Congratulations on your new Super Combo. In addition to its contemporary d esign,
this is a highly sophisticated engineered product that will give you many years
of satisfaction.
Here are some of the best reasons for buying your Combo
7. Energy Savings
This appliance is engineered to provide valuable energy savings when compared to other washer-dryers.
8. Maintenance
Since the machine has a self-cleaning pump, this appliance needs no cleaning of lint after drying. Instead, there is a convenient coin trap.
6.
This appliance uses very little water for washing and drying and far less than a standard full-size top-loading washer.
1. Improved Operation
With a high spin speed, more water is extracted, allowing improved dry times.
3. Convenience
This appliance can be permanently installed and be made portable with the installation of the portability kit (sold separately) where needed.
5. Better Clothing Appearance
-Dryer has no agitator to damage your clothes so they look better and last
longer.
4. Placement Options
- es it a perfect appliance for any Kitchen or
-Dryer perfect for placement on
each floor of your home.
2. Easy Operation
This appliance is simple to use as a washer or as a dryer – or it can go seamlessly from wash to the dry functions.
9. Space Savings
By combining the two functions of washer and dryer in one unit, the space taken for the second unit, i.e. separate dryer, is saved.
3
10.
on the ideal dry system depending on availability of a venting outlet.
Flexible venting option
Your safety and that of your children
Your Combo Washer-Dryer has been built in compliance with safety regulations,
WARNING – To reduce the risk of fire, electric shock, or injury to persons when
using your appliance, follow basic precautions, including the following:
SAVE THESE INSTRUCTIONS
1. Read all instructions before using the appliance.
2. Do not wash or dry articles that have been previously cleaned in, washed in, or spotted with gasoline, dry-cleaning solvents, other flammable or explosive substances, as they emit vapors that could ignite or explode.
3. Do not allow children to play on or in the appliance. Close supervision of children is necessary when the appliance is used near children.
4. Before the appliance is removed from service or discarded, remove the door.
5. Do not reach into the appliance if the tub or drum is moving.
6. Do not install or store this appliance where it will be exposed to the weather.
7. Do not tamper with controls.
8. Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in the user-maintenance instructions or in published user-repair instructions that you understand and have skills to carry out.
9. Do not add gasoline, dry-cleaning solvents, or other flammable or explosive substances to the wash water. These substances give off vapors that could ignite or explode.
10. Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using a washing machine or combination washer-dryer, turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated Hydrogen.
Do not use fabric softeners or products to reduce static unless recommended by the
manufacturers of the fabric softener product.
12. Do not use heat to dry articles containing foam rubber or similarly textured rubber-like materials.
13. Check the Coin Trap every few months to remove any coins, buttons or similar size objects.
14. For vented washer-dryers keep the exhaust opening and surrounding areas free from accumulation of lint, dust, and dirt.
15. Do not place items exposed to cooking oils in your dryer. Item contaminated with cooking oils may contribute to a chemical reaction that could cause a load to catch fire.
4
IMPORTANT SAFETY INSTRUCTIONS
5
The model number of this product may be found on the back of the unit; the serial number of the label affixed to the back of the unit.
You should note the model and serial numbers of this unit in the space provided. Retain this booklet as a permanent record of your purchase to aid in identification in the event of theft.
MODEL#
SERIAL#
CAUTION
ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER
PROFESSIONALS.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
SAFETY
1. Your Washer-Dryer spins at a high 1000 rpm spin speed, which will extract more water
especially f r o m absorbent fabrics and reduce the degree of dampness as the machine goes into
the drying mode.
This will cut down on your drying time.
6. SORTING: When sorting laundry always take into consideration the quantity and type of fabric contained
in the load. Highly absorbent fabrics such as those used in towels or jeans will absorb more water
and become very heavy when saturated. If you notice that your clothes are taking longer than usual to dry you may be overloading the machine, or washing too many highly absorbent articles for a single load.
2. FABRIC SOFTENER: After the wash cycle, the clothes can get stuck to the sides of the drum. USING LIQUID FABRIC AND TUMBLE IN THE DRY CYCLE. THIS HELPS DRY CLOTHES FASTER AND CAUSES LESS WRINKLES.
3. OVERLOADING: The drum has a capacity of 13 lbs (1.72 cu. ft.) While this unit has one of the
largest drum available on any combination washer-dryer, it is smaller than a standard U.S. washer. drum should not be overloaded. With too many clothes, airflow is r e d uced, increasing drying time. The drum should be filled to a maximum 2/3
rd
full.
4. OVER DRYING: The condensing dryer uses cold water is used to condense the moisture from
the hot air. Since there is no external exhaust system, the moisture remains in the m achine. Frequently, when it seems the clothes are damp, it is actually the remaining moisture (like d e w). Take clothes out and within a few minutes they will be dry. Do not over -dry the clothes. The exhaust system
5. USE HIGH EFFICIENCY (HE) DETERGENT: By using High Efficiency (HE) detergent, you are preventing suds from entering the condensing chamber . When suds enter the c o ndensing
chamber, tlhe particles can clog up the chamber and the fan blower. O v er time, this reduces
drying efficiency and may require the fan blower (impeller) to be c l e a ned. For this and all other front
-loading/horizontal-axis units, High Efficiency (HE) detergents go
a long way to improve the efficiency of
the units.
uses air-dry.
HELPFUL HINTS FOR DRYER EFFICIENCY
1. The unit must be installed on a strong level floor, and in protected, dry, and well-ventilated area
close to a power and water supply of sufficient capacity, and a sufficient outlet.
2.
• Carpets – place on light carpet only.
– brace floor with screws and place additional sheets of plywood before installation.
3. This unit’s installation and grounding should be done in accordance with local codes by a qualified
installer. “Installation Instructions” are included in this manual for the Installer’s reference.
4.
with minimum 15 Amps, It should not be controlled by a wall switch or pull cord which might be
turned off accidentally.
PRE-INSTALLATION
DIAGRAM OF THE COMBO WASHER-DRYER
6
Factory-supplied Parts
Drain Hose
Control Panel
Door
Drum
Power Cord
Shipping Rod
Detergent
Dispenser
Adjustable Feet
Inlet hose (2)
Cap for shipping rod hole (2)U-Connector for Drain hose
Loading...
+ 18 hidden pages