Epson Stylus 460 Service Manual

pbosf`b=j^kr^i

QJ`здзк=mЙклзе~д=fеваЙн=mкбенЙк

bmplk=pнудмл=`lilo=QSM

pbfgVVMMU

bmplk=pнудмл=`lilo=QSM oЙоблбзе=^

kзнбЕЙW

^дд=кбЦЬнл=кЙлЙкоЙЗK=kз=й~кн=зС=нЬбл=г~ем~д=г~у=ДЙ=кЙйкзЗмЕЙЗI=лнзкЙЗ=бе=~=кЙнкбЙо~д=лулнЙгI=зк=нк~елгбннЙЗ=бе=~еу=Сзкг=зк=Ду=~еу=гЙ~елI= ЙдЙЕнкзебЕI=гЙЕЬ~ебЕ~дI=йЬзнзЕзйубеЦI=кЙЕзкЗбеЦI=зк=знЬЙкпблЙI=пбнЬзмн=нЬЙ=йкбзк=пкбннЙе=йЙкгбллбзе=зС=pbfhl=bmplk=`lomlo^qflkK

qЬЙ=ЕзенЙенл=зС=нЬбл=г~ем~д=~кЙ=лмДаЙЕн=нз=ЕЬ~еЦЙ=пбнЬзмн=езнбЕЙK

^дд=ЙССзкн=Ь~оЙ=ДЙЙе=г~ЗЙ=нз=ЙелмкЙ=нЬЙ=~ЕЕмк~Еу=зС=нЬЙ=ЕзенЙенл=зС=нЬбл=г~ем~дK=eзпЙоЙкI=лЬзмдЗ=~еу=Йккзкл=ДЙ=ЗЙнЙЕнЙЗI=pbfhl=bmplk= пзмдЗ=ЦкЙ~нду=~ййкЙЕб~нЙ=ДЙбеЦ=беСзкгЙЗ=зС=нЬЙгK

qЬЙ=~ДзоЙ=езн=пбнЬлн~еЗбеЦ=pbfhl=bmplk=`lomlo^qflk=Е~е=~ллмгЙ=ез=кЙлйзелбДбдбну=Сзк=~еу=Йккзкл=бе=нЬбл=г~ем~д=зк=нЬЙ=ЕзелЙимЙеЕЙл= нЬЙкЙзСK

bmplk=бл=~=кЙЦблнЙкЙЗ=нк~ЗЙг~кв=зС=pbfhl=bmplk=`lomlo^qflkK

dЙеЙк~д=kзнбЕЙW lнЬЙк=йкзЗмЕн=е~гЙл=млЙЗ=ЬЙкЙбе=~кЙ=Сзк=бЗЙенбСбЕ~нбзе=ймкйзлЙ=зеду=~еЗ=г~у=ДЙ=нк~ЗЙг~квл=зк=кЙЦблнЙкЙЗ=нк~ЗЙг~квл=зС=

нЬЙбк=кЙлйЙЕнбоЙ=зпеЙклK=bmplk=ЗблЕд~бгл=~еу=~еЗ=~дд=кбЦЬнл=бе=нЬзлЙ=г~квлK

`зйукбЦЬн=«=NVVV=pbfhl=bmplk=`lomlo^qflkK=mкбенЙЗ=бе=g~й~еK

bmplk=pнудмл=`lilo=QSM oЙоблбзе=^

PRECAUTIONS

There are cautionary notes throughout the text to help you avoid personal injury or equipment damage.

W ARNING

Signals a precaution which, if ignored, could result in serious or fatal personal injury. Great caution should be exercised in performing procedures preceded by a WARNING heading.

Always observe the measures listed below when performing repair or maintenance procedures.

CAUTION

Signals a precaution which, if ignored, could result in damage to equipment.

WARNING

1. Always disconnect the product from both the power source and host computer before performing any maintenance or repair procedure.

2. No work should be performed on the unit by persons unfamiliar with basic safety measures dictated for all electronics technicians in their line of work.

3. In performing testing described in this manual, do not connect the unit to a power source until instructed to do so. When the power supply cable must be connected, use extreme caution in working on the power supply and other electronic components.

CAUTION

1. Repairs on EPSON products should be performed only by an EPSON-certified repair technician.

2. Make certainthat the source voltage is the same as the rated voltage listed on the serial number/rating plate. If the EPSON product has a primary AC rating different from the available power source, do not connect it to the power source.

3. Always verify that the EPSON product has been disconnected from the power source before removing or replacing printed circuit boards and/or individual chips.

4. To protect sensitive microprocessors and circuitry, use static discharge equipment, such as anti-static wrist straps, when accessing internal components.

5. Replace malfunctioning components only with those components recommended by the manufacturer; introduction of second-source ICs or other nonapproved components may damage the product and void any applicable EPSON warranty.

+ 7 hidden pages