Epson PRO 10000CF User Manual
®
Auto Take-up
Reel Unit User’s Guide
English . . . . . .
XXXXXXX-XX
XXX-00
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior
written permission of SEIKO EPSON CORPORATION. The information contained herein is designed only
for use with this EPSON product. EPSON is not responsible for any use of this information as applied to other
products.
Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of this product or
third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of:
accident, misuse, or abuse of this purduct or unauthorized modifications, repairs, or alterations to this
product, or (excluding the U.S.) failure to strictly comply with SEIKO EPSON CORPORATION’s operating
and maintenance instructions.
SEIKO EPSON CORPORATION shall not be liable against any damages or problems arising from the use of
any options or any consumable products other than those designated as Original EPSON Products or EPSON
Approved Products by SEIKO EPSON CORPORATION.
General Notice: Other product names used herein are for identification purposes only and may be trademarks
of their respective owners. EPSON disclaims any and all rights in those marks.
Copyright © 2001 by SEIKO EPSON CORPORATION, Nagano, Japan.
For European Users
This product conforms to CE marking requirements in accordance with EC Directive 89/336/EEC.
Dieses Produkt entspricht den ßedingungen zur CE-Kennzeichnung in Übereinstimmung mit der EGRichtlinie 89/336/EWG.
Ce produit est estampillé CE et conforme aux directives européennes 89/336/EEC.
Este producto cumple los requisitos de señalización de la CE, según lo dispuesto en las directivas 89/336/EEC
de la CE.
Il prodotto è conforme ai requisiti CE ed alle direttive EC 89/336/EEC.
Este produto está em conformidade com os requisitos de etiquetagem CE nos termos da Directiva
89/336/EEC.
English
Safety Instructions
Important safety instructions
Read all of these instructions and save them for
later reference. Follow all warnings and
instructions marked on the unit.
❏ Do not place the unit near a radiator or heat
source.
❏ Unplug the printer before cleaning. Clean
with a damp cloth only. Do not spill liquid on
the unit.
❏ Except as specifically explained in this guide,
do not attempt to service the unit yourself.
❏ Unplug the unit and refer servicing to
qualified service personnel under the
following conditions:
if liquid has entered the unit;
if the unit has been dropped or the cabinet
damaged;
if the unit does not operate normally or
exhibits a distinct change in performance.
For United Kingdom users
Use of options
Epson (UK) Limited shall not be liable against any
damages or problems arising from the use of any
options or consumable products other than those
designated as Original EPSON products or
EPSON Approved products by Epson (UK)
Limited.
Warnings, cautions, and notes
w
c
Notes contain important information and useful tips
on the operation of the product.
Warnings must be followed carefully to avoid
bodily injury.
Cautions must be observed to avoid damage to
your equipment.
Note:
Adjust only those controls that are covered by the
operating instructions.
A few precautions
❏ Always turn the printer off before changing
the roll paper. Accidental operation of the
take-up motor can cause injury.
❏ Make sure that the take-up reel unit is securely
locked into place. Incorrect installation can
cause the roll to fall and cause injury.
❏ Do not touch the auto take-up reel unit while
it is operating. Hair or clothing can become
caught in the unit and cause injury.
❏ Do not look directly at the sensor beam. Doing
so may cause permanent eye damage.
1
Checking the Package Contents
Make sure that all the items shown below are
included and not damaged. Remove all protective
materials packed with this unit before you set it
up and turn on the power. Save all packaging and
protective materials in case you need to transport
the printer later.
Drive unit (with control box) Movable unit
Take-up reel core (3 inch)
Installing the Auto Take-Up Reel Unit
c
Before starting:
❏ Make sure that the printer is turned off.
❏ Remove the paper basket or push the front
Caution:
Use only the provided screws when installing
the auto take-up reel unit. Use of non-issue
screws can leave components insecurely
fastened, increasing the risk of injury and
printer damage.
part of the paper basket to the rear to keep it
out of the way.
Sensor unit Screws (Large 2, small 4)
Cable clamps Drafting tape
Movable unit stopper Cable connector
2
Loading...