EPSON
Date: 8/30/2007 Originator: DS
PSB #: PSB.2007.08.001 Authorization:
Reference: N/A Total Pages: 1
Product(s): Epson Projectors with an HD-15 VGA Analog/Component Input
Subject: Elmo HV-110XG Document Camera and Projector Compatibility
This bulletin was created to inform you of an operational issue with the Elmo HV-110XG
Document Camera when initially connected to an Epson projector.
Problem:
When attempting to use the Elmo HV-110XG Document Camera connected via the VGA HD15
connection to display content from its document bed. When connected to the projector, the
projector displays only the Blue Screen - No Signal message and will blink off and on or
display just the Blue Screen - No Signal message. When a computer is connected to the Elmo
HV-110XG Document Camera and switched to Pass-Through mode, the computer image is
displayed correctly by the projector. When switching back to the document table source of the
Elmo HV-110XG Document Camera, the problem returns. The Elmo HV-110XG Document
Camera puts out a Progressive Scan 20fps signal to the projector's VGA Analog port. This
signal is detected at 15 kHz Vertical and 291.8 kHz Horizontal frequencies which are beyond
projector sync specifications.
RODUCT SUPPORT BULLETIN
P
Solution:
With the Elmo HV-110XG Document Camera powered on and connected to the projector via
the VGA computer cable, access the Computer1/Computer2 setting in the projector menu
system and select the Component setting within the appropriate connection. This will allow
the Elmo HV-110XG Document Camera and projector to sync and the projector to display the
image of the document camera bed and its contents. However, the image will have a pink
cast. To eliminate the pink cast, change the projector setting from Component to RGB then to
Auto and exit from the menu. The projected image will now look normal. This will now allow
the Elmo HV-110XG Document Camera to sync and display the image properly to any other
connected Epson projector without having to change the projector settings.
Page 1 of 1
EPSON
RODUCT SUPPORT BULLETIN
P
Date:
PSB #:
Reference:
Product(s):
Subject:
This bulletin was created to inform you of an upgrade to the EMP Link 21L software, which
provides support for the Powerlite 600p / 800p / 810p / 811p / 820p / 720c / 730c and the
TW100 projectors.
Description of Change:
The upgrade to the EMP Link21L software adds support for the newer projectors and for
Windows XP and Mac OS 10.1 operating systems.
Reason:
The earlier version of the EMP Link21L (Version 1.00) provided support for the PowerLite
800p and 810p projectors only. In addition, Windows XP and Mac OS 10.1 have been added
as supported operating systems, as shown below:
07/17/2002
PSB.2002.08.003
TI 02-14e Rev. A
Powerlite 600p / 800p / 810p / 811p / 820p / 720c / 730c / TW100
EMP Link21L Upgrade (Version 1.10)
Originator:
Authorization:
Total Pages:
esc
1
Supported Operating Systems Serial port USB port
Windows 95 OK Not supported
Windows 98 OK OK
Windows Me OK OK
Windows NT4.0 SP3 and later OK Not supported
Windows 2000 Professional OK OK
Windows XP Home Edition OK OK
Windows XP Professional OK OK
Mac OS 8.6, 9.0, 9.02, 9.04, 9.1,
9.2, 9.2.2, X 10.1
N/A OK
Page 1 of 1