Note: HDBaseT™ is available for the PowerLite 5520W/5530U/5535U only.
PowerLite® 5510/5520W/5530U/5535U
Quick Reference
This Quick Reference card gives brief instructions on connecting your
projector and using common features. For details, see the online User’s
Guide.
5BNC-to-VGA cable
VGA-to-component cable
VGA cable
HDMI cable
Ethernet cable
Stereo mini jack cable
BNC-to-component cable
Displaying a Test Pattern
1. Press the Test Pattern button
(remote control) or the button
(projector).
2. Press the Page up or down arrow
button (remote control), or the Enter
button (projector) to change the test
pattern.
3. When you’re done, press the Esc
button to clear the test pattern.
Changing Screen Type
Set the Screen Type setting to the
screen’s aspect ratio.
1. Press the Menu button.
2. Select Extended > Display >
Screen > Screen Type.
3. Select the screen’s aspect ratio.
Note: The displayed image should match
the screen’s size and shape.
4. When you’re done, press the Menu
button to exit.
Note: After changing the screen type, you
may need to change the aspect ratio of the
projected image depending on the input
signal. Press the Aspect button on the
remote control to change the aspect ratio,
if necessary.
Turning the Projector On
1. Turn on your computer or image
source.
2. Remove the lens cover.
3. Press the power button (projector)
or On button (remote control).
After the status light stays blue, the
projector is ready.
Note: If the Direct Power On function is
enabled, you can turn the projector on
without pressing the power button; just
plug it in or flip the switch controlling
the outlet to which the projector is
connected. To turn on this feature, see
the online User’s Guide.
4. If your image does not appear, see
“Switching Between Image Sources”
or “Troubleshooting.”
Changing the Language of
the Projector Menus
The default language of the projector’s
menu system is English, but you can
change it as necessary.
1. Press the Menu button to access
the projector’s menu system.
2. Select Extended > Language.
3. Select your language.
4. When you’re done, press the Menu
button to exit.
Switching Between Image
Sources
Press the Search button or one of the
source buttons (remote control), or the
Source Search button (projector).
Adjusting Image Position
1. Release the lens shift dial lock.
2. Turn the vertical and horizontal lens
3. When you are done making
4. If the projector is on a table, you can
Focusing and Zooming
Turn the focus ring to sharpen the
image.
Loading...