Epson PowerLite 5000 Product Information Guide

EPSON PowerLite 5000 Multimedia Projector

remote control

foot’fobt

Projector Specifications

General

Type of display

Size of liquid
crystal panels

Resolution
Image size
Projection

distance
Projection

method
Remote control

range
Internal speaker

system
Optical aspect

ratio
Zoom ratio

Projector lamp

Type

Power
Part number

Mechanical

Liquid crystal panel, Thin Film
Transistor

(TFT)

1.32 inches (33.6 mm)
800 (horizontal) x 600 (vertical) pixels
21 to 300 inches (0.6 to 7 meters)

3.3 to 33 feet (1 to 10 meters)

Front, rear, and upside-down projection

33 feet (10 meters)

2 x 2 W stereo

4 x 3 (horizontal x vertical)

1:1.3

Metal Halide, DC

150w

ELPLP03

zoom ring

+v

release

lever

f&us

ring

Depth
Weight

15.0 inches (380 mm) with lens

14.1 lb (6.4 kg)

Electrical

Voltage 100 to 120
Rated frequency
Power

&

Consumption

50/60

ENERGY STAR Compliance

100 to 120

200 to 240

Hz

VAC

and 200 to 240

VAC,

2.7 A,

VAC,

1.6 A,

50/60
50/60

VAC

Hz
Hz

Environmental

Temperature Operation: 41 to 104” F (5 to 40” C),

non-condensing
Storage: -14 to 140” F (-10 to 60” C),

non-condensing

Humidity

Operation: 20 to 80%

RH,

non-condensing
Storage: 10 to 90%

RH,

non-condensing

Supported monitor displays

The projector displays images at a resolution of 800 x 600
pixels. To display a higher resolution image, the projector
compresses it to 800 x 600. The following table lists the
display formats supported by the projector:

Computer type

IBM PC and
IBM PC compatible

Apple Macintosh

NEC

Note: The frequencies ofsome

Formats

VGA, VESA, EGA
CGA

Standard 8- and

24.bit

color monitor

PC

computers

Resolutions

640 x 480
640 x 200
640 x 400
800 x 600

1024 x 768*

640 x 480
832 x 624

1024 x 768*

640 x 480
800 x 600

may not allow the image

to be displayed correctly.
Note: This projector is

compatible

with DDC-capable graphic

sub-systems and boards only.

*

The projector uses a patent-pending technology to resize the

image to 800 x

600.

Height 6.3 inches (159 mm)
Width 9.7 inches (245 mm)

1/137 PowerLite 5000 Multimedia Projector - 1

EPSON PowerLite 5000 Multimedia Projector

Projector Placement Guidelines

The distance between the projector and the screen determines
the actual image size. Use the general guidelines in the table
below to determine the proper distance.

Horizontal distance from

Image size
(diagonal)

300 inches
200 inches

100 inches

80 inches
60 inches
40 inches
30 inches
21 inches

the projector screen

Minimum Maximum

393.7inches

263.8 inches (6.7 m) 342.5 inches (8.7 m)

129.9 inches (3.3 m) 169.3 inches (4.3 m)

106.3 inches (2.7 m) 137.8 inches (3.5 m)

78.7 inches (2 m) 102.4 inches (2.6 m)

51.2 inches (1.3 m) 66.9 inches (1.7 m)

39.4 inches (1 m) 51.2 inches (1.3 m)

39.4 inches (1 m)

(IO m)

Projector Status Indicators

The power and lamp indicators at the top of the projector let
you know the projector’s operating status, as described below.

Status indicator Function

Power indicator

Steady orange: Sleep mode. (The projector is plugged in,

Steady green: Power and lamp are on.
Flashing orange: The projector is hot.
Steady red The projector is too hot and has turned off.

Projection lamp indicator

6

but not projecting.)

Monitor and Computer In 1/2 Connector Pin Assignments

The Monitor and Computer In 1/2 connectors are female
video RGB, 15-pin micro-D-style connectors. The pin
assignments are:

Monitor connector Computer In 1/2

Input pin signals connector signals

1

2
3
4 Reserved Monitor (ID bit
5
6 GND Red video GND
7
8 GND Blue video GND
9 Reserved

10 GND Synchronous GND

11
12
13
14 Vertical sync Vertical sync
15 Vertical sync SCL

Red out / red video Red video
Green out / green video Green video
Blue out/blue video Blue video

GND GND

GND Green video GND

+5 v

Reserved Monitor (ID bit
Reserved
Horizontal sync Horizontal sync

SDA

2)

0)

Information Reference List

Engineering Change Notices

None.

Technical Information Bulletins

Steady green Projection lamp is on.
Flashing green The projector is warming up.
Orange and red Projection lamp needs replacing.

flashing alternately
Flashing orange Projector lamp is cooling down.
Steady red Projector lamp has burned out. Replace it

to project images.

Flashing red Problem with projection lamp or lamp

power supply.

Note:

Ifyou

press the Power button to turn the projector back on

while the power indicator

isJlashing

orange, there may be a delay

before the projected image appears.

2 - PowerLite 5000 Multimedia Projector

None.

Product Support Bulletins

None.

Related Documentation

CPD 4401

EPSON PowerLite-5000 Multimedia
Projector User’s Guide

SM-ELP5000 EPSON PowerLite-5000 Multimedia

Projector Service Manual

PL-ELP5000

EPSON PowerLite-5000 Multimedia
Projector Parts Price List

1/137