All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means,
electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. No patent
liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the
use of the information contained herein.
Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs,
or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs,
or alterations to this product.
SEIKO EPSON CORPORATION and its affiliates shall not be liable against any damages or problems arising from the use of any options or any
consumable products other than those designated as Original EPSON Products or EPSON Approved Products by SEIKO EPSON CORPORATION.
EPSON is a registered trademark of SEIKO EPSON CORPORATION.
Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States of America and other countries.
IBM and PS/2 are registered trademarks of International Business Machines Corporation.
Macintosh is a registered trademark of Apple Computer, Inc.
CompactFlash is a trademark of SanDisk Corporation and has been licensed to CFA (CompactFlash Association).
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective companies.
The EPSON digital camera software suite, including
EPSON Photo!3 and EPSON Photo File Uploader3, is
the perfect companion for your EPSON digital
camera. Using this software along with your digital
camera, you can save your photos as files to your
computer’s hard disk.
❏
The software supports the EPSON PhotoPC 800
and 850Z.
❏
EPSON Photo!3 directly controls the main
features of your EPSON digital camera, and is the
standard cross-platform interface for other
applications.
❏
EPSON Photo File Uploader3 allows you to
upload image files and audio recording files
stored in your computer, or capture screen shots
on the computer screen and save them in the
digital camera’s memory.
❏
EPSON Program Uploader allows you to upload
optional programs from the computer to the
camera, or delete programs from the camera.
❏
You can convert image files into various formats,
such as JPEG and Bitmap Files, for use with your
favorite desktop publishing and image-editing
software.
About This Guide
The information in this guide is divided into four
chapters, with a glossary and index provided for
reference.
❏
Chapter 1 contains instructions for connecting the
camera to your computer, and information on
installing the software. Be sure to read this
chapter first.
❏
Chapter 2 provides you with a complete
description of EPSON Photo!3.
Introduction
1
❏
Chapter 3 explains how to upload images, audio
recordings, and programs to your EPSON digital
camera.
System Requirements
❏
Chapter 4 explains how to solve problems you
may have while using the software.
Notes contain important information and useful tips on
operating your digital camera and software.
Finding More Information
❏
Online help also provides information about
EPSON Photo!3 settings.
❏
To set up and use the digital camera, see the user’s
guide of your camera.
Requirements for serial connection
PCs
486 processor or higher
Serial port with standard RS-232C interface and a
communication speed of 19200 bps or higher
At least 16 MB RAM (32 MB for Windows 98)
Hard disk drive with at least 40 MB free space
VGA monitor with at least 16-color display
Microsoft
Macintosh computers
Power PC processor
Serial port
24 MB RAM
Hard disk drive with at least 40 MB of free space
®
Windows 95, 98, or NT 4.0 or later
2
Introduction
Monitor with minimum resolution of 640 × 480
Hard disk drive with at least 40 MB free space
Macintosh System 7.5 or later
QuickTime 3 or later
Requirements for USB connection
PCs
486 processor or higher
USB port (TYPE A receptacle)
At least 32 MB RAM
Hard disk drive with at least 40 MB of free space
VGA monitor with at least 16-color display
Microsoft
Macintosh computers
Power PC G3 processor
Apple Macintosh with built-in USB port
24 MB RAM
®
Windows 98 pre-installed
Monitor with minimum resolution of 640 × 480
Macintosh OS 8.1 or later (OS 8.1 requires that iMac
Update is installed before installing EPSON Photo!3.
You can get it from the Apple Web site.)
Introduction
3
4
Introduction
Chapter 1
Installing the Software
1
The CD-ROM that comes with your EPSON digital
camera contains EPSON Photo!3, EPSON Photo File
Uploader3, and other optional software.
With EPSON Photo!3, you can transfer your pictures
and audio recordings from the camera to your
computer, and then place them in documents. EPSON
Photo File Uploader3 allows you to transfer digital
images and audio recordings from the computer to
your camera.
This chapter shows you how to connect your camera
to your computer and install the camera software in
your PC or Macintosh.
Note:
❏
Be sure to install EPSON Photo!3 first. You cannot
install other software before EPSON Photo!3 is
installed.
❏
When you install EPSON Photo!3, the EPSON
Program Uploader utility is also installed
automatically.
Connecting the Camera to Your Computer
You can connect your camera to a PC or Macintosh
with a serial cable or the included USB cable. See the
instructions in this section.
Note:
❏
When the camera is connected to your computer, you
cannot use any of the control buttons on the camera,
except the shutter button. You can only operate the
camera through your computer. To install the software,
go to next section. For the shutter press feature, see
“Setting up the Shutter Press feature for Windows 98/
USB users” on page 2-3.
❏
You can save battery power by using the optional AC
adapter whenever you connect the camera to your
computer.
❏
When the camera is connected to a computer with the
USB cable, the automatic shut-off feature does not
work.
Installing the Software
1-1
Using the USB cable
To connect the camera to your computer with a USB
cable, use the USB cable included with your camera.
Follow these steps.
Caution:
c
Be sure to use the USB cable that comes with your
camera to avoid damaging the camera’s interface
connector.
1.Turn on your computer.
2.Plug the cable connector into the USB port on your
computer or USB hub.
3.Open the connector cover on the side of the
camera. Insert the other end of the USB cable to
the interface connector. Make sure the shape of
the cable connector fits the interface connector.
PhotoPC 800
connector cover
PhotoPC 850Z
USB port on computer
1-2
Installing the Software
USB cable
connector cover
Caution:
c
Be sure to position the cable correctly before
pushing it into the connector. Otherwise, the
cable and connector may be damaged.
Note:
❏
You can connect or disconnect the USB cable from the
computer or camera while the computer and camera are
turned on. If a dialog box appears, follow the steps in
“Installing the USB driver” on page 1-6 to install the
software.
❏
Although you can connect and disconnect the USB
cable anytime, EPSON recommends connecting it as
explained above to secure the connection.
❏
If your camera does not work properly when connected
to the hub, see page 4-3 in Chapter 4,
“Troubleshooting.”
Using a serial cable
1
Connecting to a PC
You can connect the camera to a PC with a Windows
serial cable. Follow the steps below.
1.Make sure the camera and your computer are
turned off.
2.Plug the cable connector into the serial port on
your computer. Then tighten the screws.
Windows
serial cable
4.If necessary, turn the camera’s dial switch to .
Caution:
c
Keep your camera and computer away from potential
sources of electromagnetic interference, such as
loudspeakers or base units of cordless telephones.
serial port on computer
Note:
If you have more than one port available, use COM1
or a similarly labelled port.
Installing the Software
1-3
3.Open the connector cover on the side of the
camera. Insert the other end of the serial cable to
the interface connector. Make sure the shape of
the cable connector fits the interface connector.
Caution:
c
Be sure to position the cable correctly before
pushing it into the connector. Otherwise, the
cable and connector may be damaged.
PhotoPC 800
PhotoPC 850Z
connector cover
connector cover
4.Turn the camera’s dial switch to and turn on
your computer.
Caution:
c
Keep your camera and computer away from potential
sources of electromagnetic interference, such as
loudspeakers or base units of cordless telephones.
1-4
Installing the Software
Connecting to a Macintosh
You can connect the camera to a Macintosh with a
Macintosh serial cable. Follow the steps below.
Note:
To connect to a Macintosh with a USB cable, see “Using
the USB cable” on page 1-2.
3.Open the connector cover on the side of the
camera. Insert the other end of the cable to the
interface connector. Make sure the shape of the
connector fits the interface connector.
PhotoPC 800
1
1.Make sure the camera and your computer are
turned off.
2.Plug the serial cable connector into the modem or
the printer port on your computer.
Macintosh serial cable
PhotoPC 850Z
connector cover
Installing the Software
connector cover
1-5
Caution:
c
Be sure to position the cable correctly before
pushing it into the connector. Otherwise, the
cable and connector may be damaged.
4.Turn the camera’s dial switch to and turn on
your computer.
Note:
Make sure AppleTalk is inactive for the port that you
use to connect your camera. Otherwise, the computer
may not recognize your camera.
Installing Software for Windows Users
When you use the USB cable to connect your camera
and computer, install the USB driver first and then
EPSON Photo!3. When you use the serial cable, you
install only EPSON Photo!3.
Note:
Be sure to follow these steps to use the USB connection.
Installing the USB driver
1-6
Caution:
c
Keep your camera and computer away from potential
sources of electromagnetic interference, such as
loudspeakers or the base units of cordless telephones.
Installing the Software
When your camera is connected to a computer with
the USB cable, follow these steps to install the USB
driver.
1.Turn on the computer, and turn the camera’s dial
switch to .
2.The dialog box below appears. Insert the software
.
CD in the CD-ROM drive, then click
Next
4.Select the
below. Then type in, or browse and select, the CDROM drive letter, the
your preferred language, and the
the location, and click
Specify a location
EPSON
Next
check box as shown
folder, the folder of
Win 98
.
1
folder as
3.Select
device
Search for the best driver for your
, then click
Next
.
5.Follow the on-screen instructions.
6.After installation is complete, click
to the next section to install EPSON Photo!3.
Finish
Installing EPSON Photo!3
Follow the steps below to install EPSON Photo!3.
1.Turn on your computer and insert the included
CD in your computer’s CD-ROM drive.
Installing the Software
. Then go
1-7
If a dialog box appears asking you to select a
language, click the appropriate language, then
click OK.
2.An introductory screen appears on your monitor.
Click the
3.A dialog box with a list of software appears. Any
software with a check mark next to it will be
installed in your PC. Click a software name to
remove or add a check mark.
Make sure there is a check mark next to
Photo!3
4.Click OK. Then follow the on-screen instructions.
5.After installing EPSON Photo!3, click
6.The installation process automatically begins for
any software you selected in addition to EPSON
Photo!3 in step 3. Follow the on-screen
instructions.
To install more software, go to the next section.
Add Software
.
icon.
EPSON
Finish
.
Installing EPSON Photo File Uploader3 and other
software
In addition to EPSON Photo!3, your software CD
contains other software to expand the capabilities of
your camera, such as EPSON Photo File Uploader3.
Follow the steps below to install the software of your
choice. See your software documentation for a
description of the available software.
1.Make sure EPSON Photo!3 is already installed. If
not, see “Installing EPSON Photo!3” on page 1-7.
If you are a USB user, install a USB driver in
advance. See “Installing the USB driver” on page
1-6.
2.If necessary, repeat steps 1 and 2 in “Installing
EPSON Photo!3” on page 1-7.
3.A dialog box with a list of software appears. Any
software with a check mark next to it will be
installed on your computer. Click a software
name to remove or add a check mark.
Make sure there is a check mark next to EPSON
Photo File Uploader3 and any other software you
want to install.
1-8
4.Click OK. Then follow the on-screen instructions.
Installing the Software
5.After installing EPSON Photo File Uploader3 or
other software, click
6.The installation process automatically begins for
any software you selected in addition to EPSON
Photo File Uploader3 in step 3. Follow the onscreen instructions.
Finish
.
Installing Software for Macintosh Users
1
Installing EPSON Photo!3
Follow the steps below to install EPSON Photo!3.
1.Turn on the computer, and insert the included CD
in the CD-ROM drive.
2.Double-click the
your computer’s desktop. Then double-click the
EPSON Photo!3
In some locations, the
contain multiple-language versions of the
software. Double-click the folder of your
preferred language.
3.Double-click the
4.Double-click the
start the installation program. Follow the onscreen instructions.
EPSON
folder.
EPSON Photo!3 Disk 1
Photo!3 Installer - Part 1
icon that appears on
EPSON Photo!3
folder may
Installing the Software
folder.
icon to
1-9
Installing EPSON Photo File Uploader3
Installing other software
Follow the steps below to install EPSON Photo File
Uploader3.
1.Turn on the computer, and insert the included CD
in the CD-ROM drive.
2.Double-click the
computer’s desktop. Then double-click the
Uploader3
In some locations, the
contain multiple-language versions of the
software. Double-click the folder of your
preferred language.
3.Double-click the
folder.
4.Double-click the
icon to start the installation program. Follow the
on-line screen instructions.
EPSON
icon.
EPSON Photo File Uploader3
Photo File Uploader3 Install
icon that appears on the
File Uploader3
File
icon may
In addition to EPSON Photo!3 and EPSON Photo File
Uploader3, your software CD contains other software
to expand the capabilities of your camera. Follow the
steps below to install the software of your choice. See
your software documentation for a description of the
available software.
1.Turn on the computer, and insert the included CD
in the CD-ROM drive.
2.Double-click the
computer’s desktop. Then double-click the folder
that contains the software you want to install.
Some folders may contain multiple-language
versions of the software. Double-click the folder
icon of your preferred language.
3.Double-click the installer icon of the program you
want to install. Then follow the on-screen
instructions.
EPSON
icon that appears on the
1-10
Installing the Software
Chapter 2
Using EPSON Photo!3
Now that EPSON Photo!3 is installed in your
computer, you are ready transfer the images you shot
with your camera to your computer. You can then use
your images in letters, presentations, or other
documents you create on your computer.
This chapter tells you how to do all these things, as
well as how to erase pictures from the camera and
upload EPSON Photo images to your camera.
2
Working with EPSON Photo!3
Once your camera and computer are connected and
turned on, you are ready to start working with EPSON
Photo!3. If you have not yet installed EPSON Photo!3
in your computer, see Chapter 1, “Installing the
Software,” to install it.
Note:
If you do not set your camera’s clock before connecting it to
the computer, the camera's time and date is automatically
set to that of the computer's after opening EPSON Photo!3.
Accessing EPSON Photo!3
To download your photos to your computer, you need
to first access EPSON Photo!3. You can either open
EPSON Photo!3 directly, or open it from a different
application. See the next page for instructions.
Note:
Before accessing EPSON Photo!3, turn the camera’s dial
switch to .
Using EPSON Photo!3
2-1
Opening EPSON Photo!3 directly
For Windows users
Start
Click
Photo!3 Ver.1
When you connect your PhotoPC 850Z to your
computer with the USB cable, pressing the camera’s
shutter button starts EPSON Photo!3. See “Setting up
the Shutter Press feature for Windows 98/USB users”
on page 2-3.
Note:
When you press the camera's shutter button, the dialog box
appears to prompt you to choose which application should
start. Choose
, point to
EPSON Photo!3
Programs
, then click
, point to
EPSON Photo!3 Ver.1
in the list and click OK.
For Macintosh users
Double-click the
EPSON Photo!3 Ver.1 program group or folder.
EPSON Photo!3 Ver.1
icon in the
EPSON
Opening EPSON Photo!3 from an application
program
From a TWAIN-compliant application
.
Choose
Photo!3 Ver.1
source on your application's File menu, then acquire
an image.
EPSON Photo!3 Ver.1
(for Macintosh) as the TWAIN data
(for Windows) or
From an OLE2-compliant application (Windows
only)
From an application that supports OLE2 (object
linking and embedding), choose
Ver.1 Object
Note:
❏
The process for accessing EPSON Photo!3 from
TWAIN or OLE2-compliant applications may vary
slightly depending on your software.
❏
Refer to your software documentation for detailed
instructions on selecting TWAIN data sources or
inserting OLE objects.
on the Insert Object menu and click OK.
EPSON Photo!3
2-2
Using EPSON Photo!3
Setting up the Shutter Press feature for
Windows 98/USB users
Windows 98 allows you to use the shutter on your
digital camera without having to open an application
that supports the Shutter Press feature. When you
press the shutter button, you can start a certain
application that supports “Shutter Press events,” such
as EPSON Photo!3, as long as it is installed.
Once EPSON TWAIN is installed on Windows 98, the
Scanners and Cameras
panel, and your camera is listed in the
Cameras Properties
icon appears on the control
Scanners and
dialog box as shown below.
Assigning an application to the shutter button
After you install applications that support “Shutter
Press events”, such as EPSON Photo!3, you need to
select one of those applications for the event.
If you want to use your camera’s shutter button with
EPSON Photo!3 as the supporting application, assign
the application to the shutter button as follows.
1.Select your digital camera from the installed
scanners and cameras list in the
Cameras Properties
Properties
, and then click the
dialog box. Click
Scanners and
Events
tab.
2
The above screen shows EPSON PhotoPC
850Z as an example.
The above screen shows EPSON PhotoPC
850Z as an example.
Using EPSON Photo!3
2-3
Loading...
+ 49 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.